CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that's like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082" thick. Hooded sight has .250" hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 rifles with standard sight housings. L1A1, FN-FAL and 3/8" sights are Hooded. 3/8" Dovetail fits common hunting rifles plus, provides a quick, on-target sight for the 10/22. M1 Garand and M1A require modification of front sight, removal of sight blade.
SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD - .010" (.25mm) wire, .240" (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8" Dovetail height measured from top of base to center of sight.
Plus...
Usiné CNC vue post a réticule intégrante d’alignement rapide une vision cohérente pour une meilleure précision à n’importe quelle plage. Ouverture de grand diamètre offre un large champ de vision qui ne masque pas la cible ; donne une image c’est comme regarder à travers une étendue. Compatible avec les curiosités arrière usine et sites cible variable-dioptrie. Non à capuchon de vue AR-15 est. 082" épais. Viseur capuchon a. 250" capot qui protège de la lumière réfléchie, en forme de croix offre une meilleure protection de la Croix pour utilisation extrême droit. STD, Croix de fil de fer mince. AR-15 en Hooded ou non à capuchon, correspond à M-16 et AR-10 fusils avec des boîtiers de vue standard. Sites L1A1, FN-FAL et 3/8" sont à capuchon. 3/8" queue d’aronde correspond à des fusils de chasse ordinaires de plus, fournit une vue rapide, sur la cible pour le 10/22. M1 Garand et M1A requièrent la modification du guidon, enlèvement de la lame de la vue.
Spécifications : mat laiton, noir,. Réticule de béryllium, chaleur traitées. STD -. 010"(.25mm) fil,. 240 » (6,1 mm) ouverture de diamètre. HK 91 correspond à 91, 93, 94 MP-5, SP-89. 3/8" queue d’aronde hauteur mesurée à partir de dessus de base au centre de la vue.
Plus...
Évaluations client de KNS PRECISION CROSSHAIRS STANDARD HOODED FRONT SIGHT BRASS BLACK
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Not Dependable(18.03.2010)
This sight lasted about 2 hours on a .22 upper and the vertical pin fell out. Perhaps it was just a quality control issue on this one sight. I decided I won't need another one.
makes shooting irons easy(05.01.2012)
Centering the round sights on the target and then placing the cross hairs gives much more accuracy vs standard sights. Height adjustments must be made in half turns and may limit your poi. Seems like solid construction and if it were to break I would replace it with another.
30 of 30 in the bullseye after innstal(11.08.2015)
I painted (Duracoat) and did some rehab work on my 1984 Colt AR-15 A-2 Sporter II. Even though I had painted the front sight post red years ago which helped the idea of having cross hairs sounded great. When the Colt was ready for it prime time, I put a bipod on and shpt 30 rounds at a B-27 target at 75 yards and to my shock all 30 shots were in a 3 inch group clustered around the bulls-eye. It was luck to get the post in to the correct height bit the cross hairs really help.
I am getting ready to buy another for my son's AR.
Référence: 923015002 KNS PRECISION CROSSHAIRS STANDARD HOODED FRONT SIGHT BRASS BLACK Ref Fabricant: ARHDST851876003950 Usiné CNC vue post a réticule intégrante d’alignement rapide une vision cohérente pour une meilleure précision à n’importe quelle plage. Ouverture de grand diamètre offre un large champ de vision qui ne masque pas la cible ; donne une image c’est comme regarder à travers une étendue. Compatible avec les curiosités arrière usine et sites cible variable-dioptrie. Non à capuchon de vue AR-15 est. 082" épais. Viseur capuchon a. 250" capot qui protège de la lumière réfléchie, en forme de croix offre une meilleure protection de la Croix pour utilisation extrême droit. STD, Croix de fil de fer mince. AR-15 en Hooded ou non à capuchon, correspond à M-16 et AR-10 fusils avec des boîtiers de vue standard. Sites L1A1, FN-FAL et 3/8" sont à capuchon. 3/8" queue d’aronde correspond à des fusils de chasse ordinaires de plus, fournit une vue rapide, sur la cible pour le 10/22. M1 Garand et M1A requièrent la modification du guidon, enlèvement de la lame de la vue.
45.9CHF19CHF 45.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that's like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082" thick. Hooded sight has .250" hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 rifles with standard sight housings. L1A1, FN-FAL and 3/8" sights are Hooded. 3/8" Dovetail fits common hunting rifles plus, provides a quick, on-target sight for the 10/22. M1 Garand and M1A require modification of front sight, removal of sight blade.
SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD - .010" (.25mm) wire, .240" (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8" Dovetail height measured from top of base to center of sight.
Plus...
Usiné CNC vue post a réticule intégrante d’alignement rapide une vision cohérente pour une meilleure précision à n’importe quelle plage. Ouverture de grand diamètre offre un large champ de vision qui ne masque pas la cible ; donne une image c’est comme regarder à travers une étendue. Compatible avec les curiosités arrière usine et sites cible variable-dioptrie. Non à capuchon de vue AR-15 est. 082" épais. Viseur capuchon a. 250" capot qui protège de la lumière réfléchie, en forme de croix offre une meilleure protection de la Croix pour utilisation extrême droit. STD, Croix de fil de fer mince. AR-15 en Hooded ou non à capuchon, correspond à M-16 et AR-10 fusils avec des boîtiers de vue standard. Sites L1A1, FN-FAL et 3/8" sont à capuchon. 3/8" queue d’aronde correspond à des fusils de chasse ordinaires de plus, fournit une vue rapide, sur la cible pour le 10/22. M1 Garand et M1A requièrent la modification du guidon, enlèvement de la lame de la vue.
Spécifications : mat laiton, noir,. Réticule de béryllium, chaleur traitées. STD -. 010"(.25mm) fil,. 240 » (6,1 mm) ouverture de diamètre. HK 91 correspond à 91, 93, 94 MP-5, SP-89. 3/8" queue d’aronde hauteur mesurée à partir de dessus de base au centre de la vue.
Plus...
Évaluations client de KNS PRECISION CROSSHAIRS STANDARD HOODED FRONT SIGHT BRASS BLACK
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Not Dependable(18.03.2010)
This sight lasted about 2 hours on a .22 upper and the vertical pin fell out. Perhaps it was just a quality control issue on this one sight. I decided I won't need another one.
makes shooting irons easy(05.01.2012)
Centering the round sights on the target and then placing the cross hairs gives much more accuracy vs standard sights. Height adjustments must be made in half turns and may limit your poi. Seems like solid construction and if it were to break I would replace it with another.
30 of 30 in the bullseye after innstal(11.08.2015)
I painted (Duracoat) and did some rehab work on my 1984 Colt AR-15 A-2 Sporter II. Even though I had painted the front sight post red years ago which helped the idea of having cross hairs sounded great. When the Colt was ready for it prime time, I put a bipod on and shpt 30 rounds at a B-27 target at 75 yards and to my shock all 30 shots were in a 3 inch group clustered around the bulls-eye. It was luck to get the post in to the correct height bit the cross hairs really help.
I am getting ready to buy another for my son's AR.