Das TIMNEY AR-15 DROP-IN TRIGGER MODULE bietet einen glatten, präzisen Abzug, der wie ein klassischer Repetierer funktioniert – ganz ohne Anpassungen!
TIMNEYAR-15 SMALL PIN TRIGGER MODULE, 3 LBS, SKELETON SHOE
081950661190883000026
Eigenschaften
Art:Non-Adjustable
Waffentyp:AR-15
Versandgewicht:0.091kg
Versandhöhe:36mm
Versandbreite:79mm
Versandlänge:104mm
UPC:081950661190
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.c
Spezifikationen:
Art: Non-Adjustable
Hersteller/Modell: AR-15
499.9499.91CHF
499.9CHFCHF 499.90
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 883000026
Herst.-Nr.: 661S
081950661190 Das selbständige Modul ist bereit zur Installation in deinem AR mit kleinem Pin und bietet einen aussergewöhnlich sanften, klaren und kriechfreien Einzelabzug, der sich mehr wie ein traditioneller Repetierbüchsenabzug anfühlt als der Abzug eines Kampfflitzers. 100% Plug-and-Play – keine Büchsenmacherei, Anpassung oder Justierung erforderlich. Alle Komponenten sind in dem leichten Gehäuse aus Aluminiumlegierung untergebracht. Der Hammer wird aus S7-Werkzeugstahl mittels Draht-EDM bearbeitet, was Härte zur Verschleissfestigkeit mit überlegener Schlagfestigkeit kombiniert, um auch bei intensiver Nutzung ohne Absplitterungen oder Brüche standzuhalten. Andere Komponenten werden aus A2-Werkzeugstahl mittels EDM geschnitten und dann auf Rc 56-60 wärmebehandelt, um eine lange Lebensdauer zu gewährleisten. Präzisionsgeschliffene Eingriffsflächen sorgen für hervorragende Zuverlässigkeit und einen klaren, sauberen Hammerauswurf. Die Installation erfolgt mit den originalen Hammer-/Abzugsstiften deines Gewehrs; das proprietäre Design verhindert das Herauslaufen der Stifte.
Nachbestellt
Kostenloser Versand.
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout.
Verbessere dein AR-15 mit einem hochwertigen Trigger-Modul!
Das AR-15 DROP-IN TRIGGER MODULE SKELETON SHOE von TIMNEY ist die perfekte Lösung für alle, die eine aussergewöhnlich glatte und präzise Abzugserfahrung suchen.
Produktbeschreibung
Dieses selbständige Modul ist bereit zur Installation in deinem AR mit kleinem Pin und bietet einen äusserst sanften, klaren und kriechfreien Einzelabzug, der sich mehr wie ein traditioneller Repetierer als wie ein Kampgewehr-Abzug anfühlt.
100% Drop-In – keine Büchsenmacherei, Anpassung oder Justierung erforderlich.
Alle Komponenten sind im leichten Aluminiumlegierungsgehäuse gefangen.
Der Hammer ist aus S7-Werkzeugstahl gefertigt, der Härte zur Verschleissbeständigkeit mit überlegener Schlagfestigkeit kombiniert, um auch bei intensiver Nutzung ohne Absplitterungen oder Brechen standzuhalten.
Andere Komponenten sind aus A2-Werkzeugstahl gefertigt und anschliessend auf Rc 56-60 wärmebehandelt für eine lange Lebensdauer.
Präzisionsgeschliffene Eingriffsflächen sorgen für hervorragende Zuverlässigkeit und einen klaren, sauberen Hammerauswurf.
Die Installation erfolgt mit den originalen Hammer-/Abzugsstiften deines Gewehrs; das proprietäre Design verhindert ein Herausfallen der Stifte.
Erlebe den Unterschied mit dem TIMNEY AR-15 Trigger-Modul und mache dein Schiesserlebnis noch besser!
Eigenschaften
Art:Non-Adjustable
Waffentyp:AR-15
Versandgewicht:0.091kg
Versandhöhe:36mm
Versandbreite:79mm
Versandlänge:104mm
UPC:081950661190
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.c
Kundenbewertungen
Kundenbewertungen (12)
4.4 / 5
Sehr empfehlenswert
Out Standing Product!!! 20.06.2016
this is my forth install
easy install with great results! Best change and investment you can make on an AR15, AR10 or Tavor!
Sehr empfehlenswert
Timney on the frontline of triggers 20.05.2015
One of the best drop in triggers and its number 1 in my book. I have Timney in all my AR platforms 10, 15's never had any issues just a great single stage crisp drop in trigger
Wenig empfehlenswert
Expensive and not worth it 25.12.2014
Just trying some different triggers in my AR builds
Quality is good but the skeleton trigger has sharp
edges on it, so unless you always wear gloves
your trigger finger will be cut up, the 3ILb pull
is nice for fast shooting, but the trigger is set
up so close to the edge that by pressing on the
trigger with the safety on you can still drop the
hammer, which is why it didn't stay in a gun
very long, maybe the 4 ILb trigger will be better.
Sehr empfehlenswert
Excelent drop in trigger group 29.11.2013
Installation was very easy, just follow the steps and dont over tighten the locking screws. (my polymer receiver didn't like it, I could see where the set screws were pushing from the inside), but my I later put this in my forged aluminum receiver and it works great!! Trigger is super crisp, and the 3lb pull feels perfect. very short reset makes follow up shots quick.
Bedingt empfehlenswert
Good trigger 28.10.2013
Opperation of the trigger is phenominal! Butter smooth, nice clean break, no take up. Giving it 4 stars for one flaw...the retention system for the trigger and hammer pins loosens after firing, so after a day at the range these pins fall free out with no resistence. Gave it a couple chances, figured maybe a break in thing, but now after 3 times of the same problem I have had to take corrective action. A little loctite on the pressure screws that are supposed to hold the pins in has helped prevent them from loosening, but I also got some anti-walk pins that will further capture the hammer/trigger pins. Product works well, but for a gun that see's hard field use there are some reliability issues that if not addressed can leave you hanging.
Sehr empfehlenswert
Happy camper 07.09.2013
Ordered on Sat over Labor Day weekend shipped Tue arrived Thu (great), watched a couple of vids, installed very easy no issues, went to the range on Sat shot like a dream, that's good cause my old trigger is in a pile O pieces in a bag somewhere Sig Sauer M400 SRP Best looking AR on the block
Empfehlenswert
Much better 02.09.2013
Installed on a Colt cr6724 after trying the J&P spring kit on the factory trigger. Now is feels like a rifle trigger should. Wanted a trigger feel like a bolt action. Very pleased. Easy to install but I do not like the set screws to hold the pins in.
Empfehlenswert
Great Trigger with surprises 08.08.2012
A very good drop in trigger. But, if you're actually building a rifle and not merely replacing your trigger group - make sure you order the pins as Timney doesn't supply any with their 250.00 trigger! My wilson combat two stage I used on another build came with the pins.
Sehr empfehlenswert
Timney AR-15 Trigger 25.09.2011
Superb fit and finish. Dead easy install; not sure why some folks find it difficult. I'd rate it a 1.5 on the scale of 1 to 5 with 5 being "bring in a pro". Read the enclosed instructions, it's very straightforward.
Light trigger, crisp, you'll want to be thoughtful using gloves because it has very little take up- it breaks with very little pressure.
I would have preferred a two stage and that's what I thought I ordered, but this will work super well.
Also- I loved the spiritual thought included! Great to see that.
Strong recommend!
Sehr empfehlenswert
Awesome trigger 08.07.2011
I bought this trigger assembly at the NRA convention here in Charlotte a year or so ago. Unfortunately Brownells did not offer it yet. The assembly is extremely simple to install and is by far the best trigger I have ever felt on any AR style platform (its also the best looking). It is currently in my Stag 2T and I have had no issues. I would also not recomend this trigger to anyone shooting with gloves of any kind.
Sehr empfehlenswert
This is an excellent Trigger 20.01.2011
I have had this trigger installed on a very early S&W MP15T for several years. Thousands of rounds have been fired using the trigger with no problems, failures or issues of any kind.This is an excllent product and a great imporvement over the factory trigger.
My trigger was factory installed by the S&W Performance Center gunsmiths, so I can't comment on ease of installation.
Sehr empfehlenswert
Great In The Desert! 16.01.2011
I have a Colt 6721. The trigger is notorious for being sloppy, and this one is no exception. In lieu of running 2500+ rounds thru it to 'loosen' it up, I put this Timney in. What a difference! Tight, crisp 3-lb. pull, easy to adjust to. I would definitely recommend this trigger, but think twice about wearing gloves.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.