Eigenschaften
- Art: Collapsible
- Art: Mil-Spec
- Farbe: Black
- Material: Polymer
- Waffentyp: AR-15
- Versandgewicht: 0.159kg
- Versandhöhe: 43mm
- Versandbreite: 157mm
- Versandlänge: 203mm
- UPC: 748252572035
Artikeldetails
US-Exportklassifizierung: 0A501.y.1

Artikel-Nr.: 100011669
Herst.-Nr.: BRV-1082
748252572035 B5 SYSTEMS BRAVO COLLAPSIBLE MIL-SPEC STOCK FÜR AR-15 Aufbauend auf dem Erfolg des B5 Systems Enhanced SOPMOD hat B5 die Funktionen, die Endbenutzer verlangen, in einem leichteren, kompakteren und stärkeren Buttstock angeboten. Der Bravo-Schaft behält die SOPMOD-Wangenauflage, eine einteilige Anti-Rotations-Schnellverschluss-Schlingenmontage, ein rutschfestes gepolstertes Buttpad und einen verbesserten Sicher-Griff-Schaftverschluss bei. Der Bravo verzichtet auf die Stauraumfunktion des SOPMOD, um ein schlankeres Profil zu bieten und sorgt dafür, dass die Rückseite des Schaftes so geneigt ist, dass eine schnelle und konsistente Schaftplatzierung gegen die Schulter und Wange gewährleistet ist. Hergestellt aus MIL-SPEC Materialien und Oberflächen. Derzeit wird dieser verstärkte Polymer-Schaft von der US-Armee verwendet und passt auf M4-Typ Empfängererweiterungen und bietet eine verbesserte Wangenauflage, die für mehr Komfort und Konsistenz sorgt. Die stromlinienförmigen Konturen verhindern das Hängenbleiben an Kleidung, Ausrüstung oder Vegetation, um eine sichere und unauffällige Bedienung zu unterstützen. Der Sicher-Griff-Schaftverschluss sorgt für eine bequeme und intuitive Anpassung der Schafthöhe, während das rutschfeste Gummirecoil-Pad die Waffe an der Schulter des Benutzers sichert. Verfügt über eine schwarze, rostfreie QD-Drehgelenkhalterung und zwei geformte 1¼" breite Schlingenöffnungen. MERKMALE Ergonomische Wangenauflage Farblich abgestimmte Stahlhardware Feste Schlingenmontagen und Stahl-Anti-Rotations-QD-Montagen Gepolstertes, rutschfestes Buttpad mit integriertem M4 Multi-Tasker® Werkzeughalter (Werkzeug separat erhältlich) Sicher-Griff-Schaftverschluss Hergestellt aus MIL-SPEC Materialien und Oberflächen Passt auf MIL-SPEC Karabiner-Empfängererweiterungen TECHNISCHE DATEN Gewicht: 9,3 oz Länge: 7,2 in Breite: 2 in Höhe: 4,9 Schwarze und Tan-Modelle sind TACOM genehmigt und auf der Liste der zusätzlichen Genehmigungen (AAL) für das M4/M4A1. Schwarze NSN: 1005-01-706-2373 Flach Dunkel Erde NSN: 1005-01-706-2510Ideal for LE 04.05.2018
I have been using a B5 stock on my patrol rifles for a few years now. Recently I decided to change the color setup of my rifle and switched it to gray. This B5 stock has fit just like my other ones. It is snug with no rattle but still readily adjusts. The A-frame on the stock gives just the right cheek weld. Also, the QD mount fits correctly and does not allow for an inadvertent release. The butt plate works well with body armor (internal carrier or outer carrier) and keep the rifle from moving around. All in all I am completely satisfied and will continue to use B5 stocks.
Will not be buying another B5 stock 07.05.2017
I bought this as a replacement for a Magpul MOE stock because I wanted to have the QD swivel socket. I already have a Bravo stock on another setup and had a good experience, so this was an easy purchase. When it arrived, I slid off the MOE stock and attempted to slide on the Bravo. I say attempted because it was very tight, which isn't a bad thing; nobody likes a sloppy fitting stock. With a few taps, I finally got it to move past the locking pin where it should start clicking into place on the receiver extension. That however, did not happen. It is now stuck in place on the receiver extension. It will not move at all. And before anyone suggests anything about the receiver extension size, this is a Daniel Defense mil-spec lower from the factory. I poured a few drops of lube between the stock and receiver extension to get it moving, no luck. With more lube in place, I tried tapping the stock out with a plastic punch and a soft mallet to no avail. The punch broke and the stock didn't move at all on the receiver. So, now I am removing the receiver extension, with the Bravo stock stuck in place, and replacing it altogether. Needless to say, I will not be purchasing another B5 Systems product.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.