Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

LITTLE CROW GUNWORKS.
AR-15 TRIGGER GUARD ROLL PIN PUSHER

100011602

Eases Installation Of Triggerguard Roll Pin

Pocket-sized tool helps prevent breaking the triggerguard tab or marring lower receiver finish when installing or removing the roll pin. Tool fully supports triggerguard tab while slowly pushing the roll pin in or out of its channel. Includes steel alignment pin and push pin to aid in roll pin removal and installation.

SPECS: Aluminum body, anodized. Molded thermoplastic handle, 1-7/16" (3.6cm) diameter. Steel screw, push pin and alignment pin.

Altro...

Facilita l'installazione del guardamano Roll Pin

Strumento tascabile aiuta a prevenire la rottura della scheda guardamano o guastare inferiore ricevitore finitura durante l'installazione o la rimozione del perno del rullo. Strumento supporta pienamente il guardamano scheda spingendo lentamente il perno del rullo dentro o fuori il suo canale. Comprende acciaio allineamento e push pin per facilitare l'installazione e rimozione del perno rullo.

Le specifiche tecniche: corpo in alluminio, anodizzato. Maniglia in materiale termoplastico stampato, 1-7/16"(3.6 cm) di diametro. In acciaio a vite, perno di spinta e perno di allineamento.

Altro...

Punteggi dei clienti per LITTLE CROW GUNWORKS. ROLL PIN PUSHER FOR AR-15 STYLE RIFLES

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.4

Good tool (10.05.2013)

This product does what the description says. If it only saves you from wrecking one receiver it's paid for itself. It's easy to use and comes with detailed instructions.

Works as advertised (31.08.2013)

Does exactly what it says, super easy to use.
Well worth it. Wouldn't build another with out it.
I added a few wraps of electrical tape to cover the pusher where it would rest on the lower just in case.

SUPPLIED PUSH PINS ARE VERY SOFT & WEAK (31.10.2013)

THE SUPPLIED PUSH PINS ARE VERY WEAK AND WILL BREAK EASY. AFTER ONE USE MY PIN SPLIT. CONTACTED THE COMPANY AND VOICED MY CONCERN AND A NEW SET OF PINS WILL BE SHIPPED TO ME

good tool (22.02.2014)

I recently purchased this for my 1st ar build and am glad I did it worked great.I had the trigger guard roll pin installed in about 30 seconds.I suppose if your careful you could just hammer in the pin with a small hammer but that's not the way my luck runs!So overall its a great tool that saves the cost of a new receiver if you break off the trigger guard tab.I would suggest taping either the support side of the tool or the tab on the receiver to prevent marring but otherwise a great tool for the job.Also as an afterthought no issues with pin hardness as mentioned in a previous review.

Very handy item (29.08.2014)

I've removed roll pins in the past to swap trigger guards without the tool, and managed, but there's always that nagging thought that if you make just one slight mistake that you'll ruin the lower receiver. This product alleviates that problem quite well. The roll pin is slowly pushed through in a nicely controlled manner. I added a drop of oil to the front of the roll pin to help it glide through. It took me longer to read the directions than it did to perform the task. I didn't experience any troubles out of it, but to prevent any marring of the lower I would put tape as suggested, or other soft material just to be sure.

Well worth the price!!! (17.04.2015)

I mush admit that I was reluctant to purchase a tool to drive one pin into an AR lower. This is a task that I have performed many times with a roll pin punch without damaging a lower. However on a whim I decided to make the purchase. But after one effortless use of this pusher I say "five stars" and "whoo-ray" for Little Crow and Brownells, a truly winning combination!!!

Works Great! (11.05.2015)

This tool works just as advertised, for smooth and easy installation of the trigger guard roll pin. The only thing which stood out to me was how the roll pin made a cracking noise during installation, with every turn of the knob on the tool. This was not my first AR trigger guard install, but it was my first time using this tool and my first time using a spiral type roll pin. Everything was soaked in CLP, but maybe a moly grease would've worked better. Either way, the tool worked perfectly. I put a piece of black electrical tape on the side which contacts the receiver ear, and ended up with a "scratch-less" trigger guard install.

Just what you need for the trigger guard (24.06.2015)

It pushed the trigger guard roll pin out with minimal effort. It will leave an aluminum stain on the receiver where the back section contacts it, so put one or two layers of masking tape on the tool. Get this if you don't want to break the "ears" off of your receiver.

Works great (01.09.2016)

Dissapointed in the tool for the money (23.01.2017)

The pusher pin wobbled in the drive screw so bad that it was impossible to drive with a straight force to remove a roll pin. (which is the main purpose of me buying this tool).

Works as advertised to install pins though.

Just be sure to tape the tool so that you don't mar the finish like he did in the Brownells video.LOL

First Build (27.03.2017)

Works as advertised, but the one I received the threads have a rough spot making it a little difficult to turn. Also I had three pins included, one more than pictured.

Leggi più recensioni su brownells.com

69.9 69.9 1 CHF

N. prodotto: 100011602
LITTLE CROW GUNWORKS. ROLL PIN PUSHER FOR AR-15 STYLE RIFLES
Parti Fabbricante: LCG-RPP Strumento tascabile aiuta a prevenire la rottura della scheda guardamano o guastare inferiore ricevitore finitura durante l'installazione o la rimozione del perno del rullo. Strumento supporta pienamente il guardamano scheda spingendo lentamente il perno del rullo dentro o fuori il suo canale. Comprende acciaio allineamento e push pin per facilitare l'installazione e rimozione del perno rullo.

69.9 CHF 25 CHF 69.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Peso della spedizione: 0.113kg Altezza di spedizione: 12mm Larghezza di spedizione: 133mm Lunghezza di spedizione: 158mm

Dettagli dell'elemento

Made in Usa

Eases Installation Of Triggerguard Roll Pin

SPECS: Aluminum body, anodized. Molded thermoplastic handle, 1-7/16" (3.6cm) diameter. Steel screw, push pin and alignment pin.

Altro...

Facilita l'installazione del guardamano Roll Pin

Le specifiche tecniche: corpo in alluminio, anodizzato. Maniglia in materiale termoplastico stampato, 1-7/16"(3.6 cm) di diametro. In acciaio a vite, perno di spinta e perno di allineamento.

Altro...

Punteggi dei clienti per LITTLE CROW GUNWORKS. ROLL PIN PUSHER FOR AR-15 STYLE RIFLES

Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 4.4

Good tool (10.05.2013)

This product does what the description says. If it only saves you from wrecking one receiver it's paid for itself. It's easy to use and comes with detailed instructions.

Works as advertised (31.08.2013)

SUPPLIED PUSH PINS ARE VERY SOFT & WEAK (31.10.2013)

THE SUPPLIED PUSH PINS ARE VERY WEAK AND WILL BREAK EASY. AFTER ONE USE MY PIN SPLIT. CONTACTED THE COMPANY AND VOICED MY CONCERN AND A NEW SET OF PINS WILL BE SHIPPED TO ME

good tool (22.02.2014)

Very handy item (29.08.2014)

Well worth the price!!! (17.04.2015)

Works Great! (11.05.2015)

Just what you need for the trigger guard (24.06.2015)

Works great (01.09.2016)

Dissapointed in the tool for the money (23.01.2017)

First Build (27.03.2017)

Works as advertised, but the one I received the threads have a rough spot making it a little difficult to turn. Also I had three pins included, one more than pictured.

Leggi più recensioni su brownells.com

Scelti da altri clientie

DARRELS CUSTOM FIREARMS HANDGUARD TOOL
AR-15/M16 HANDGUARD REMOVAL TOOL

DARRELS CUSTOM FIREARMS

Riordinato

CHF 54.90 *

Strumenti per paramani

DEWEY AR-15 CLEANING COMBO
AR-15/ 308 AR RIFLE CHAMBER CLEANING COMBOS

DEWEY

In magazzino

CHF 23.90 * CHF 23.90 - CHF 26.90*

Scovoli per camere

BROWNELLS ACCU-WEDGE
AR-15/M16 ACCU-WEDGE

BROWNELLS

Riordinato

CHF 9.90 *

Riduttore di gioco

REAL AVID AR-15 SCRAPER
AR-15 SCRAPER

REAL AVID

In magazzino

CHF 47.90 *

Chiave multiuso

CMMG AR15 AMBIDEXTROUS SAFETY SELECTOR
AR-15 SAFETY SELECTOR

CMMG

In magazzino

CHF 46.90 *

Sicurezze

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.