Votre panier est vide.

Panier

0917309915

MAGPUL
AR-15/16 PMAG RANGER® FLOORPLATE 3 PACK

873750001906 100003501

Fast, Easy Mag Changes In High Stress Situations

Replacement floorplate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round PMAGs for fast, secure tactical magazine changes. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer overmolded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks and available in Black. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Plus...

Rapide et facile Mag changements dans la haute soulignent Situations

Remplacement floorplate apporte la vitesse et la contrôlabilité de la plaque d'appui Ranger Magpul original pour les deux 20 et 30-ronde PMAGs changements magazine tactique rapide et sécurisé. Boucle de doigt sans à-coup profilée, facile à comprendre et rainuré pouce fossette aide à extraction positive de sachets de mag serré et vous aident à accrocher le chargeur vide avec juste un doigt après un rechargement tactique. Fait de polymère solide, renforcée surmoulé avec doux et anti-dérapante en caoutchouc synthétique qui amortit également le magazine impact s'ils tombent sur une surface dure. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Facile, installation encastrée : supprimer la floorplate usine de la PMAG comme vous le faites pour le nettoyage et remplacez-la par la plaque d'appui Ranger. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.

Spécifications : polymère renforcé, caoutchouc enduit. 3 par Pak. Mag212 fits originales et M2 PMAG, pas GEN 3 556 PMAGS.

Plus...

Évaluations client de MAGPUL PMAG RANGER FLOORPLATE, BLACK, 3-PAK

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 4.8

Typical MAGPUL Quality (14.01.2010)

Easy to install and gives you a little something extra to grab

Easy access (09.12.2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01.12.2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09.09.2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11.09.2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02.10.2009)

The Magpul PMAG Ranger plates are a quick an effective solution for not only protecting your mags but also making them more effective. The angle on the bottom of the Ranger plate puts you at nearly the perfect angle for shooting while proned out on the ground. The loop also increases speed of mag exchanges and makes ripping the mag much smoother. I use them on all of my mags!

Should be standard equipment (17.11.2009)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (06.12.2010)

These worked great. Easy to install.

saves your mag if you drop em a lot (08.08.2011)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (27.05.2013)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (29.01.2016)

These fit perfectly on the Gen 3 magazines. It actually takes 5 seconds to remove floor plate and install the Ranger plate (unless you let the spring escape). My shooting days with the M16 goes back to the late 1960's and continue thru the present. The MagPul Gen3 with Ranger plate is great.

Correction (13.07.2016)

This is the correct floor plate for the Gen 2 PMAG and won't fit on the Gen 3 Magazine. (Model # MAG561 is the Gen 3 PMAG plate.) It takes all of 5 seconds (unless you let the spring escape) to remove the original plate and install this one. In addition to all the speed elements, this allows for effortless removal of magazines from tightly packed pouches of all types. It is well worth it to equip all your Gen 2 PMAGs with this plate.

Awesome Product (24.09.2017)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (03.03.2018)

Itâs a good solid product, but I bought these for some 10 round hunting mags and they donât fit. They work just fine on my 30 and 40 round mags. The way the 10 rounders are molded at the rail for the base plate doesnât line up with the Rangers and the way theyâre molded at the rail. I didnât see anywhere clearly stating they would not work with 10 round Pmags, and these are the 3rd Gen mags too. If I missed it, my fault, but it is certainly not clearly stated anywhere obvious. For that reason this product gets 4/5 stars. If youâre buying them for bigger mags, you should consider this a 5/5.

Disappointed and considering returning them as they arenât working out for what I wanted them for, but Iâll probably just put them on some 40 round mags.

Lire 14 plus d'avis sur brownells.com

27.6 27.6 1 CHF

Sale

Référence: 100003501
MAGPUL PMAG RANGER FLOORPLATE, BLACK, 3-PAK
Ref Fabricant: MAG212-BLK 873750001906 Remplacement floorplate apporte la vitesse et la contrôlabilité de la plaque d'appui Ranger Magpul original pour les deux 20 et 30-ronde PMAGs changements magazine tactique rapide et sécurisé. Boucle de doigt sans à-coup profilée, facile à comprendre et rainuré pouce fossette aide à extraction positive de sachets de mag serré et vous aident à accrocher le chargeur vide avec juste un doigt après un rechargement tactique. Fait de polymère solide, renforcée surmoulé avec doux et anti-dérapante en caoutchouc synthétique qui amortit également le magazine impact s'ils tombent sur une surface dure. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Facile, installation encastrée : supprimer la floorplate usine de la PMAG comme vous le faites pour le nettoyage et remplacez-la par la plaque d'appui Ranger. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.

27.6 CHF 92 CHF 27.60 * CHF 33.90

Délai de livraison environ 2-4 jours à partir de l'entrepôt local.

Caractéristiques: Couleur: Noir Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Couleur: Noir Manufacture: AR-15 Poids du colis: 0.077kg Hauteur d'expédition: 32mm Largeur d'expédition: 140mm Longueur d'expédition: 210mm

Détails de l'article

Fabriqué au USA

Fast, Easy Mag Changes In High Stress Situations

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Plus...

Rapide et facile Mag changements dans la haute soulignent Situations

Spécifications : polymère renforcé, caoutchouc enduit. 3 par Pak. Mag212 fits originales et M2 PMAG, pas GEN 3 556 PMAGS.

Plus...

Évaluations client de MAGPUL PMAG RANGER FLOORPLATE, BLACK, 3-PAK

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 4.8

Typical MAGPUL Quality (14.01.2010)

Easy to install and gives you a little something extra to grab

Easy access (09.12.2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01.12.2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09.09.2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11.09.2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02.10.2009)

Should be standard equipment (17.11.2009)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (06.12.2010)

These worked great. Easy to install.

saves your mag if you drop em a lot (08.08.2011)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (27.05.2013)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (29.01.2016)

Correction (13.07.2016)

Awesome Product (24.09.2017)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (03.03.2018)

Lire 14 plus d'avis sur brownells.com

Poursuivre vos achats

MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 30RD POLYMER BLACK 1PK
AR-15 30RD PMAG GEN M3 WINDOW MAGAZINE 223/5.56

MAGPUL

En stock

CHF 32.90 * CHF 32.90 - CHF 2'299.90*

Chargeurs | Magazines

MAGPUL AR-15 PMAG GEN M2 MOE WINDOW MAG 223/5.56 30RD BLK 1PK
AR-15 30RD PMAG GEN M2 MOE WINDOW MAGAZINE 223/5.56

MAGPUL

En stock

CHF 26.90 * CHF 26.90 - CHF 1'849.90*

Chargeurs | Magazines

4.9

PRECISION GUN SPECIALTIES 22 LONG RIFLE ORANGE DUMMY ROUNDS 50/PACK
SAF-T-TRAINERS DUMMY ROUNDS

PRECISION GUN SPECIALTIES

En stock

CHF 24.90 * CHF 12.90 - CHF 54.90*

Cartouches Factices

3.2

MAGPUL .223/5.56 DUMMIES, 5-PAK
.223/5.56 DUMMY ROUNDS

MAGPUL

En stock

CHF 15.90 *

Cartouches Factices

3.4

MAGPUL AR-15 PMAG GEN M2 MOE MAG 223/5.56 30RD POLYMER BLACK
AR-15 30RD PMAG GEN M2 MOE MAGAZINE 223/5.56

MAGPUL

En stock

CHF 23.90 * CHF 23.90 - CHF 1'599.90*

Chargeurs | Magazines

4.8

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.