Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

BROWNELLS
AR-15/M16 CRITICAL TOOLS KIT

050806108578 080000812
Essential Tools Needed To Build, Customize Or Rebarrel Any AR-15
Convenient kit has essential tools you need to build, repair, or modify a custom AR-15/M16 rifle - without duplicating the common tools you already have. Includes our top-quality Brownells Armorer's Wrench, necessary for installation and removal of any barrel with either encapsulated or peg-style barrel nuts. Also has wrenches for flash hiders, M4-style castle nut, and A2 buffer tube nut. Lower Receiver Vise Block snaps into the magwell just like a magazine to provide a secure clamping surface for a vise without risk of damaging or distorting the receiver. Heavy-duty clamshell Upper Receiver Action Block lets you clamp the upper in a vise to remove or install the barrel or perform other work without crushing, twisting, or damaging it. Fits carry handle and flattop receivers. Two pivot pin tools: one retracts the spring-loaded detent, so you can remove the pivot pin completely from the receiver; the other retains the detent and spring while installing the pivot pin. Bolt Catch Pin Punch has a flat handle that clears the left side of the magwell for easy removal of the bolt catch pivot pin by driving it to the rear.  DO NOT USE ON BILLET UPPERS OR DAMAGE TO THE UPPER CAN RESULT.

SPECS: Armorer’s Wrench - Investment cast steel, black finish. Fits barrels up to 1-1/4” O.D. Lower Receiver Vise Block - High-density urethane plastic, black. Receiver Action Block - Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Pivot Pin Detent Tools/Bolt Catch Pin Punch – Steel, black oxide finish.

174.9 174.9 1 CHF
Référence: 080000812
BROWNELLS AR-15/M16 CRITICAL TOOLS KIT 050806108578 Kit pratique comporte des outils essentiels, que vous avez besoin pour construire, réparer ou modifier un fusil AR-15/M16 personnalisé - sans dupliquer les outils communs que vous avez déjà. Comprend clé de notre armurier Brownells haut de gamme, nécessaire pour l'installation et la suppression d'un baril soit encapsulé ou Ecrous cylindrique peg-style. A également des clés pour A2 tampon tube écrou, écrou crénelé M4-style et flash hiders. Bloc d'étau récepteur inférieur s'enclenche la magwell comme un magazine de prévoir une surface de serrage sûre un étau sans risque d'endommager ou de fausser le récepteur. À clapet robuste bloc d'Action récepteur supérieur vous permet de fixer la tige dans un étau pour enlever ou installer le baril ou effectuer une autre tâche sans broyage, tordre ou endommager. FITS portent des récepteurs flattop et poignée. Deux pivot pin outils : l'un rétracte le cran d'arrêt à ressort, vous pouvez supprimer l'axe de pivotement complètement du récepteur ; l'autre conserve la détente et au printemps lors de l'installation de l'axe de pivotement. Chasse-goupilles Bolt Catch a une poignée plate qui efface la partie gauche de la magwell pour faciliter le retrait de l'axe de pivotement de captures de boulon en le conduisant vers l'arrière. NE PAS UTILISER SUR LES TIGES TAILLÉES DANS LA MASSE OU DES DOMMAGES À LA TIGE PEUT RÉSULTENT.
174.9 CHF 0 CHF 174.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: AR-15

Caractéristiques

Manufacture: AR-15 Poids du colis: 1.356kg

Détails de l'article

Fabriqué au USA



Essential Tools Needed To Build, Customize Or Rebarrel Any AR-15
Convenient kit has essential tools you need to build, repair, or modify a custom AR-15/M16 rifle - without duplicating the common tools you already have. Includes our top-quality Brownells Armorer's Wrench, necessary for installation and removal of any barrel with either encapsulated or peg-style barrel nuts. Also has wrenches for flash hiders, M4-style castle nut, and A2 buffer tube nut. Lower Receiver Vise Block snaps into the magwell just like a magazine to provide a secure clamping surface for a vise without risk of damaging or distorting the receiver. Heavy-duty clamshell Upper Receiver Action Block lets you clamp the upper in a vise to remove or install the barrel or perform other work without crushing, twisting, or damaging it. Fits carry handle and flattop receivers. Two pivot pin tools: one retracts the spring-loaded detent, so you can remove the pivot pin completely from the receiver; the other retains the detent and spring while installing the pivot pin. Bolt Catch Pin Punch has a flat handle that clears the left side of the magwell for easy removal of the bolt catch pivot pin by driving it to the rear.  DO NOT USE ON BILLET UPPERS OR DAMAGE TO THE UPPER CAN RESULT.

SPECS: Armorer’s Wrench - Investment cast steel, black finish. Fits barrels up to 1-1/4” O.D. Lower Receiver Vise Block - High-density urethane plastic, black. Receiver Action Block - Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Pivot Pin Detent Tools/Bolt Catch Pin Punch – Steel, black oxide finish.

Newsletter