For Convenient Mounting Of Auxiliary Optics, Lights & Other Accessories
Lightweight, low-profile, rail clamps to handguard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength. The 1 O'Clock Offset Rail now utilizes the Daniel Defense patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.
Per il montaggio conveniente di ottiche ausiliarie, luci & altri accessori
Ferrovia leggera, a basso profilo, i morsetti per paramani lato ferrovia per consentire il facile montaggio fuori asse di red dot luoghi nella posizione 01:00 o 11:00. Permette di transizione operatore quasi istantaneamente da ottica primaria a lungo raggio non ingrandita vista CQB senza rompere cheekweld. Visualizzazione tunnel attraverso il Monte aiuta a minimizzare l'ostruzione della visuale dell'operatore dell'area attorno al bersaglio. Molti altri usi, troppo; morsetti per qualsiasi MIL-STD 1913 Picatinny rail. Installare sulla inferiore di handguard per posizionare un laser o weaponlight vicino impugnatura verticale frontale per un facile utilizzo dei comandi con supporto di mano. Lavorati di precisione da alluminio billet 6061-T6, poi aggiunto mil-spec Type III hardcoat anodizzato per forza. Il 1 Rail Offset ora utilizza il Daniel Defense brevettato Rock e Lock™ un pezzo sistema di montaggio, creando una superficie di montaggio ancora più robusto e aerodinamico, nonché installazione semplificata su qualsiasi MIL-STD-1913 "picatinny rail".
Specifiche: in alluminio 6061-T6, hardcoat anodizzato, nero opaco. 1,2 once (34g) peso.
Altro...
Punteggi dei clienti per DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 5
Perfect red dot mount with scope.(30.12.2009)
Perfect mount for my Burris Fastfire on my 18" SPR. Easy transition from scope at top center, over to red dot at 1:00 and back without changing cheek weld. Works better than having to raise your eye upward from the scope. Best product I have found for this application. Very good design. A winner.
Great product(06.03.2010)
Mounts solid places the sight at the proper place in reference to the scope. how could you ask for more.
Perfect mount(20.01.2013)
I've tried a couple different mounts, this super lite, very rigid mount places the RMR in exactly the right location on my AR15 and AR308 rifles. Fast transition from long glass to red dot and back to long glass again. Great job Daniel Defense!
Great buy!(05.04.2013)
I love these add-ons! Great for my backup sights and I can't wait to sight these iron sights in. They look great, fit great, and seem very durable. Great buy!
N. prodotto: 100003943 DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL Parti Fabbricante: 03-029-13017852548002189 Ferrovia leggera, a basso profilo, i morsetti per paramani lato ferrovia per consentire il facile montaggio fuori asse di red dot luoghi nella posizione 01:00 o 11:00. Permette di transizione operatore quasi istantaneamente da ottica primaria a lungo raggio non ingrandita vista CQB senza rompere cheekweld. Visualizzazione tunnel attraverso il Monte aiuta a minimizzare l'ostruzione della visuale dell'operatore dell'area attorno al bersaglio. Molti altri usi, troppo; morsetti per qualsiasi MIL-STD 1913 Picatinny rail. Installare sulla inferiore di handguard per posizionare un laser o weaponlight vicino impugnatura verticale frontale per un facile utilizzo dei comandi con supporto di mano. Lavorati di precisione da alluminio billet 6061-T6, poi aggiunto mil-spec Type III hardcoat anodizzato per forza. Il 1 Rail Offset ora utilizza il Daniel Defense brevettato Rock e Lock™ un pezzo sistema di montaggio, creando una superficie di montaggio ancora più robusto e aerodinamico, nonché installazione semplificata su qualsiasi MIL-STD-1913 "picatinny rail".
79.9CHF9CHF 79.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: AR-15Colore: Opaco BlackMateriale: AlluminioNumero di basi: 1 pezzoTipo: Basi tattiche
Adatto per:
AR-15
Colore:
Opaco Black
Materiale:
Alluminio
Numero di basi:
1 pezzo
Tipo:
Basi tattiche
Peso della spedizione: 0.113kgAltezza di spedizione: 61mmLarghezza di spedizione: 76mmLunghezza di spedizione: 140mm
For Convenient Mounting Of Auxiliary Optics, Lights & Other Accessories
Lightweight, low-profile, rail clamps to handguard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength. The 1 O'Clock Offset Rail now utilizes the Daniel Defense patented Rock and Lock™ one piece mounting system, creating an even more robust and streamlined mounting surface as well as simplified installation on any MIL-STD-1913 picatinny rail.
Per il montaggio conveniente di ottiche ausiliarie, luci & altri accessori
Ferrovia leggera, a basso profilo, i morsetti per paramani lato ferrovia per consentire il facile montaggio fuori asse di red dot luoghi nella posizione 01:00 o 11:00. Permette di transizione operatore quasi istantaneamente da ottica primaria a lungo raggio non ingrandita vista CQB senza rompere cheekweld. Visualizzazione tunnel attraverso il Monte aiuta a minimizzare l'ostruzione della visuale dell'operatore dell'area attorno al bersaglio. Molti altri usi, troppo; morsetti per qualsiasi MIL-STD 1913 Picatinny rail. Installare sulla inferiore di handguard per posizionare un laser o weaponlight vicino impugnatura verticale frontale per un facile utilizzo dei comandi con supporto di mano. Lavorati di precisione da alluminio billet 6061-T6, poi aggiunto mil-spec Type III hardcoat anodizzato per forza. Il 1 Rail Offset ora utilizza il Daniel Defense brevettato Rock e Lock™ un pezzo sistema di montaggio, creando una superficie di montaggio ancora più robusto e aerodinamico, nonché installazione semplificata su qualsiasi MIL-STD-1913 "picatinny rail".
Specifiche: in alluminio 6061-T6, hardcoat anodizzato, nero opaco. 1,2 once (34g) peso.
Altro...
Punteggi dei clienti per DANIEL DEFENSE ONE O'CLOCK OFFSET RAIL
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 5
Perfect red dot mount with scope.(30.12.2009)
Perfect mount for my Burris Fastfire on my 18" SPR. Easy transition from scope at top center, over to red dot at 1:00 and back without changing cheek weld. Works better than having to raise your eye upward from the scope. Best product I have found for this application. Very good design. A winner.
Great product(06.03.2010)
Mounts solid places the sight at the proper place in reference to the scope. how could you ask for more.
Perfect mount(20.01.2013)
I've tried a couple different mounts, this super lite, very rigid mount places the RMR in exactly the right location on my AR15 and AR308 rifles. Fast transition from long glass to red dot and back to long glass again. Great job Daniel Defense!
Great buy!(05.04.2013)
I love these add-ons! Great for my backup sights and I can't wait to sight these iron sights in. They look great, fit great, and seem very durable. Great buy!