Votre panier est vide.

Panier

0917309915

POWER CUSTOM
AR-15/M16 RECEIVER SHIMS

713000108

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

Tempered stainless steel shims reduce play between receiver halves and hammer/trigger components for a tighter, smoother-functioning rifle. Helps restore accuracy and reduce noise in older rifles. Upper/Lower shims fit on the pivot pin to reduce side-to-side play between the upper and lower receiver.

SPECS: Stainless steel, heat-hardened. Pak of 10.

Plus...

Élimine les indésirable jeu entre majuscules/minuscules récepteurs & éléments déclencheurs

Cales en acier trempé inoxydable réduisent le jeu entre les moitiés de récepteur et de composants de déclenchement/marteau pour un fusil plus serré, plus lisse-fonctionnement. Aide à restaurer l'exactitude et de réduire le bruit dans les fusils anciens. Cales de majuscules/minuscules s'adapter sur l'axe de pivotement pour réduire à côté de jeu entre le récepteur inférieur et supérieur.

Spécifications : acier inoxydable, durci à la chaleur. Pak 10.

Plus...

Évaluations client de POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)

I bought this product after seeing it in learning section of the website. I am currently a full time police officer/firearms instructor and have wasted thousands of dollars on gimmicks and other bs products that claim to get rid of every problem you have with your rifle. At my department we are all assigned an individual m4 carbine that is ours. We are also allowed to make slight modifications within reason and this is only on the ouside not internally in the gun. Ive been assigned the same m4 for ten years now and have tens of thousands of rounds through it from training, personal training, attending brass maker carbine classes, and annual qualifications. My point, my rifle has some wear and tear on it. It is a bushmaster (old school rifle actually made in the Windham, Maine plant before Freedom group bought them out.) This was a $600 rifle when I bought it. Its not a $2,000 rifle. It has gone the distance and then some and rarely, I mean rarely had a malfunction which has been due to ammo everytime.

So from this wear and tear Ive never had to replace buffer springs, gas tubes, etc. Ive only cleaned it and stayed up on it. However this brings to me to my point. My upper and lower have considerbale play in them. There's some slop. I tried the accuwedge from Brownells which did do a good job of getting rid of the rear slop however I still had front slop. I tried the accuwedge in another rifle build I have which got rid of all the slop. The rifle I built was brand new and didn't have any of the wear and tear on it my duty rifle did. So at first I tried one shim on both take down and pivot pins. Didn't take all of the slop out but most of it. So I then tried two shims on each pin. It was so tight I couldnt lock the upper and lower together. After some quick research I ended up going with an accuwedge in the rear by the buffer and two shims on the pivot pin. Worked like a charm. Rifle feels brand new. It doesn't move like a cerokoted rifle. Again, my rifle doesn't move at all. There is zero slop. This was done all for the cost of the $20. Brownells accuwedge is a great addition to any rifle. Get it along with the shims. You wont be sorry. Also becareful of reviews. Some people aren't intelligent enough to actually be assembling these rifles. i WOULD RECCOMEND THIS TO A FRIEND AND EVERYONE. HERES A HINT BROWNELLS. YOU SHOULD SELL YOUR ACCUWEDGE WITH THE RECIEVER SHIMS AS PART OF A PACK DEAL.

Works (16.01.2017)

As noted by others, the shims in this pack are all the same width and takes patience to install. Otherwise, they work as advertised. I added 2, one to each side of my front pivot pin, and the receiver "wobble" was gone. Also, opening and closing the receiver with the shims installed were not a problem. I would've given this product 5-stars had different shim widths been supplied versus being all the same.

Lire 3 plus d'avis sur brownells.com

35.9 35.9 1 CHF

Référence: 713000108
POWER CUSTOM UPPER/LOWER RECEIVER SHIMS
Ref Fabricant: NONE Cales en acier trempé inoxydable réduisent le jeu entre les moitiés de récepteur et de composants de déclenchement/marteau pour un fusil plus serré, plus lisse-fonctionnement. Aide à restaurer l'exactitude et de réduire le bruit dans les fusils anciens. Cales de majuscules/minuscules s'adapter sur l'axe de pivotement pour réduire à côté de jeu entre le récepteur inférieur et supérieur.

35.9 CHF 32 CHF 35.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.023kg Hauteur d'expédition: 5mm Largeur d'expédition: 104mm Longueur d'expédition: 165mm

Détails de l'article

Fabriqué au USA

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

SPECS: Stainless steel, heat-hardened. Pak of 10.

Plus...

Élimine les indésirable jeu entre majuscules/minuscules récepteurs & éléments déclencheurs

Spécifications : acier inoxydable, durci à la chaleur. Pak 10.

Plus...

Évaluations client de POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)

Works (16.01.2017)

Lire 3 plus d'avis sur brownells.com

Poursuivre vos achats

ERGO GRIPS AR-15/M16 M4 RECEIVER CASTLE NUT
AR-15 RECEIVER EXTENSION CASTLE NUT

ERGO GRIPS

En stock

CHF 15.90 *

Matériels Tube Receiver

COLT AR-15 A4 FRONT SIGHT TAPER PIN BLACK
AR-15 A4 FRONT SIGHT TAPER PIN BLACK

COLT

Récommandé

CHF 11.90 *

Goupilles Visée

RADIAN WEAPONS AR-15 RAPTOR AMBIDEXTROUS CHARGING HANDLE BLACK
AR-15 RAPTOR CHARGING HANDLE 5.56

RADIAN WEAPONS

En stock

CHF 144.90 * CHF 144.90 - CHF 149.90*

Poignées de Chargement

MAGPUL MOE K2+ GRIP POLYMER BLACK
AR-15 MOE K2+ GRIP

MAGPUL

Récommandé

CHF 35.90 *

Poignées de Pistolet

ALG DEFENSE ACT AR-15 TRIGGER SET
AR-15 ENHANCED MILITARY-STYLE TRIGGERS

ALG DEFENSE

En stock

CHF 124.90 * CHF 119.90 - CHF 124.90*

Détentes

4.6

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.