Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

YANKEE HILL MACHINE CO., INC.
AR-15/M16 TACTICAL CHARGING HANDLE LATCH

100015922

Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).

SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.

Plus...

Jamais de lutte pour charger votre AR-15 nouveau ! Ce verrou de remplacement vous permet d'accéder votre poignée d'armement en toute simplicité. Particulièrement populaire parmi ceux qui ont une portée sur leur AR-15, ou ceux qui portent des gants pendant le tournage. Ce verrou dispose d'aire de la surface supplémentaire pour atteindre lorsque vous devez recharger votre fusil AR-15. Construction en acier avec une finition grise foncée. Comprend loquet seulement, emploie existant goupille ressort et roll. (Ne pas inclure printemps ou roll pin).

Spécifications : Fits - AR15/M16 standard poignées de charge. Finition - Gray. Construction - acier. Comprend - verrou uniquement. N'inclut pas de goupille ou printemps.

Plus...

Évaluations client de YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.6

BUY THIS (13.05.2015)

I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.

YHM Charge Handle Latch (14.11.2015)

Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.

After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.

Yes I like this latch.

Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.

Yankee Hill Latch (07.01.2016)

The pro's: great fit. wide handle with no rough edges and it was easy to install.

The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.

I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!

I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.

The photo doesn't show the gray well. It's far more gray than pic!

Great Value (21.03.2016)

Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.

QUALITY! (03.08.2016)

This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!

these work (01.11.2016)

These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.

Worth it (30.12.2016)

It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.

No Gunsmith Required (15.03.2017)

Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.

REAL DEAL HANDS DOWN (20.05.2017)

Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!

Good low cost high value upgrade (28.12.2017)

Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth

<img width="500" src='/userdocs/reviewimages/c15efd20-cb8a-429f-b18c-f243f3593c37.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/eff693e6-4474-42e5-8f7e-2038274ae9fa.jpg' alt=''>

Lire 10 plus d'avis sur brownells.com

29.9 29.9 1 CHF

Référence: 100015922
YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Ref Fabricant: YHM281 Jamais de lutte pour charger votre AR-15 nouveau ! Ce verrou de remplacement vous permet d'accéder votre poignée d'armement en toute simplicité. Particulièrement populaire parmi ceux qui ont une portée sur leur AR-15, ou ceux qui portent des gants pendant le tournage. Ce verrou dispose d'aire de la surface supplémentaire pour atteindre lorsque vous devez recharger votre fusil AR-15. Construction en acier avec une finition grise foncée. Comprend loquet seulement, emploie existant goupille ressort et roll. (Ne pas inclure printemps ou roll pin).

29.9 CHF 30 CHF 29.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.041kg Hauteur d'expédition: 19mm Largeur d'expédition: 51mm Longueur d'expédition: 76mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.

Plus...

Spécifications : Fits - AR15/M16 standard poignées de charge. Finition - Gray. Construction - acier. Comprend - verrou uniquement. N'inclut pas de goupille ou printemps.

Plus...

Évaluations client de YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH

Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.6

BUY THIS (13.05.2015)

YHM Charge Handle Latch (14.11.2015)

Yankee Hill Latch (07.01.2016)

Great Value (21.03.2016)

QUALITY! (03.08.2016)

This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!

these work (01.11.2016)

Worth it (30.12.2016)

No Gunsmith Required (15.03.2017)

REAL DEAL HANDS DOWN (20.05.2017)

Good low cost high value upgrade (28.12.2017)

Lire 10 plus d'avis sur brownells.com

Poursuivre vos achats

STARLINE 9MM LUGER BRASS 100/BAG
9MM LUGER BRASS

STARLINE

Récommandé

CHF 29.90 *

Douilles Arme de Poing

4.7

SEEKINS PRECISION SAFETY SELECTOR KIT, AMBIDEXTROUS, BLACK
SAFETY SELECTOR KIT, AMBIDEXTROUS, BLACK

SEEKINS PRECISION

En stock

CHF 89.90 *

Sécurités

3.5

PRECISION GUN SPECIALTIES 22 LONG RIFLE ORANGE DUMMY ROUNDS 50/PACK
SAF-T-TRAINERS DUMMY ROUNDS

PRECISION GUN SPECIALTIES

En stock

CHF 24.90 * CHF 12.90 - CHF 54.90*

Cartouches Factices

3.2

SEEKINS PRECISION AR15 BOLT CATCH
AR-15/M16 ENHANCED BOLT CATCH

SEEKINS PRECISION

En stock

CHF 36.90 *

2.9

GRACE USA 1/16" PUNCH
ROLL PIN PUNCHES

GRACE USA

En stock

CHF 16.90 * CHF 14.90 - CHF 54.90*

Chasse Goupille

4.8

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.