Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

DOUBLE STAR
AR-15/M16 TWANG BUSTER

841348104704 100005392

Stops Annoying Buffer Noise During Recoil

Low-friction Delrin disk fits on the end of the buffer spring, opposite the buffer, and stops the annoying "twang" of the buffer hitting the rear of the receiver extension during recoil. Quick, easy installation, with no permanent alterations to gun. Simply remove buffer and spring, insert Twang Buster, then reinstall buffer and spring.

SPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.

Plus...

Arrêts ennuyeux tampon bruit pendant le recul

Faible coefficient de frottement Delrin disque s'adapte à l'extrémité du ressort de la mémoire tampon, en face de la mémoire tampon et s'arrête à l'ennuyeux « twang » de la mémoire tampon de frapper l'arrière de l'extension du récepteur pendant le recul. Installation rapide et facile, avec aucune altération permanente d'armes à feu. Simplement enlever le tampon et au printemps, insérez Twang Buster, puis réinstaller le tampon et au printemps.

SPECS : usiné Delrin thermoplastique, noir. Convient pour A2 rifle et style M4 carbine tampon printemps/récepteur extension tubes.

Plus...

Évaluations client de DOUBLE STAR TWANG BUSTER

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 2.9

Not bad (12.08.2010)

Does what it says although it causes bolt catch to malfuntion

works good (27.11.2010)

ive had it for 3 months works and have never had any problems with my rifle.
would def recamend it.

Can be problematic. (17.08.2011)

It does reduce the twang as it says, but in my RRA it reduced the bolt stroke enough that my bold catch would not catch every time. It also caused my bolt to short stroke on occasion and jam the rifle. If you buy this, before installing lock back your bolt and carrier all the way by hand, hold it there and visual check the distance between your bolt face and bolt catch. After installing the buster check that gap again to see if you still have enough to compensate for loads that may not be full power. My RRA went from about a little less than a 1/4" gap to about 10 thousands only. Just thoroughly check function before relying on it.

Meh.. (06.09.2011)

Does stop the annoying twang but it prevented the bolt catch from operating properly on my DPMS AP4. All in all, if you need your bolt catch to work I'd avoid this device, if you don't care about the bolt catch give it a shot.

DO NOT BUY JUNK (05.10.2011)

MADE MY BOLT CATCH INOPERABLE

Ok part (20.12.2011)

It does what it's supposed to do in regards to quieting down the spring noise. But it does have the annoying habit of not letting the bolt lock all the way back after the last round is fired. Not sure if this is due to the combo of running the recoil pad too.
When I installed this I was only using .223 55gr, when I stepped up to 5.56 62gr, the issue was not there as often. I'll use it some more, but we'll see what happens in the next 300+rds.

works well in my 9mm dpms style ar (22.05.2012)

I bought one for my 9mm ar, and it worked perfectly, so I bought several more, and havn't had a single problem. Some of those over-power springs have a few extra coils, so the spring is longer when fully compressed. That may be the problem that others are having. If 1/16 inch piece of plastic is going to prevent your bolt from going all the way back, get a better spring. Those flat wire springs work great! Brownells # 452-000-119WB or 840-000-048WB

It deserves a higher rating. It works. (23.09.2012)

This product does everthing it says and nothing it does not. I install these in every AR I own and it does take the "twang" that all AR's make when fired. Anything to help make the weapon quieter is a good thing. If the "twang doesn't bother you, don't buy it. If you want that sound eliminated completely then I highly recommend it because it does do what it says.

Waste of money. (23.05.2014)

Installed and it did nothing. I removed it, re-read the instructions and re-installed. Still nothing. Changed springs to flat wire JP springs. Still no busting of the twang was going on in my full length A2 stock.

Works (22.10.2014)

Works as it claims. If Your having bolt locking problems in all likelihood your spring is A: too long or B: too stiff or C: A&B.

Had a friend with locking issues & his spring was using wire that was 0.005" thicker than mine. We swapped springs & swapped which rifle had the problem.

Save yer money (18.12.2014)

It's really the spring in the tube of the stock that "twangs" and this does nothing for that - in fact after installing it, the bolt wouldn't lock up manually or after the last shot. Can't return these fast enough.

Does not work as advertised, (22.05.2017)

I purchased the twang buster and installed it my Palmetto State Armory A2 lower buffer assembley. This product does absolutely nothing to reduce the sound of the buffer working, causes the buffer to bottom out too soon- resulting in excess wear on the face of the buffer being smashed by the bolt carrier, and as a kicker, is incredibly difficult to remove once installed. Do not purchase this item. Waste of time, waste of money, causes excess wear on your firearm.

Lire 12 plus d'avis sur brownells.com

14.9 14.9 1 CHF

Référence: 100005392
DOUBLE STAR TWANG BUSTER
Ref Fabricant: JT140 841348104704 Faible coefficient de frottement Delrin disque s'adapte à l'extrémité du ressort de la mémoire tampon, en face de la mémoire tampon et s'arrête à l'ennuyeux « twang » de la mémoire tampon de frapper l'arrière de l'extension du récepteur pendant le recul. Installation rapide et facile, avec aucune altération permanente d'armes à feu. Simplement enlever le tampon et au printemps, insérez Twang Buster, puis réinstaller le tampon et au printemps.

14.9 CHF 0 CHF 14.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir Manufacture: AR-15 Matériaux: Thermoplastic

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Couleur: Noir Manufacture: AR-15 Matériaux: Thermoplastic Poids du colis: 0.005kg Largeur d'expédition: 76mm Longueur d'expédition: 89mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

Stops Annoying Buffer Noise During Recoil

SPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.

Plus...

Arrêts ennuyeux tampon bruit pendant le recul

SPECS : usiné Delrin thermoplastique, noir. Convient pour A2 rifle et style M4 carbine tampon printemps/récepteur extension tubes.

Plus...

Évaluations client de DOUBLE STAR TWANG BUSTER

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 2.9

Not bad (12.08.2010)

Does what it says although it causes bolt catch to malfuntion

works good (27.11.2010)

ive had it for 3 months works and have never had any problems with my rifle.
would def recamend it.

Can be problematic. (17.08.2011)

Meh.. (06.09.2011)

DO NOT BUY JUNK (05.10.2011)

MADE MY BOLT CATCH INOPERABLE

Ok part (20.12.2011)

works well in my 9mm dpms style ar (22.05.2012)

It deserves a higher rating. It works. (23.09.2012)

Waste of money. (23.05.2014)

Works (22.10.2014)

Save yer money (18.12.2014)

Does not work as advertised, (22.05.2017)

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats

DANIEL DEFENSE AR-15 STOCK COLLAPSIBLE MIL-SPEC BLK
AR-15 STOCK COLLAPSIBLE MIL-SPEC

DANIEL DEFENSE

En stock

CHF 129.90 *

Crosse d'Epaule

4.8

MAGPUL M-LOK T-NUT REPLACEMENT SCREWS STEEL BLACK
AR-15 M-LOK T-NUT REPLACEMENT SCREWS STEEL BLACK

MAGPUL

Récommandé

CHF 14.90 *

Sale

MAGPUL AK/AKM PMAG GEN M3 MAGAZINE 7.62X39 30RD POLYMER BLACK
AK/AKM 30RD PMAG GEN M3 MAGAZINE 7.62X39

MAGPUL

En stock

CHF 39.00 *

Ancien prix CHF 45.90

Chargeurs | Magazines

Sale

MAGPUL AK-47 PMAG GEN M2 MOE MAGAZINE 7.62X39 10RD POLYMER BLACK
AK-47 10RD PMAG GEN M2 MOE MAGAZINE 7.62X39

MAGPUL

En stock

CHF 25.40 *

Ancien prix CHF 29.90

Chargeurs | Magazines

ZEV TECHNOLOGIES PROFESSIONAL MAGWELL FOR G19/G23 FRAME
PRO MAGWELL FOR GLOCK® FRAMES

ZEV TECHNOLOGIES

Récommandé

CHF 144.90 *

3.8

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.