Professional Grade AR Upper Receiver Fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the AR15/M16/M4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the Device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "T" interface. Front and rear lugs are controlled along with the entire bottom receiver flat. Compatible with milspec dimensioned receivers and billet receivers utilizing milspec internal dimensions. The Device does not contact barrel extension and is not caliber sensitive. Accurate Picatinny rail, with enumeration, allows for quick optic set-up or repair. A lanyard is provided to keep parts at-hand and help prevent dropping. An internal spring loaded detent allows for vertical application without loss of control. A2 and M4 rear sight tension spring alignment and removal is built in. Forward Assist removal channel in base. "Bolt carrier" style recesses allows Ejection Port door opening and testing.
Plus...
Luminaire de Upper Receiver AR de qualité professionnelle. Appareil robuste conçu pour les années d’utilisation intensive. Interface rapide et intuitive qui permet la construction/reconstruction rapide et la réparation de l’ensemble récepteur supérieur de la famille AR15/M16/M4 de fusils/carabines/pistolets. Conçu pour permettre à toutes les parties de carcasse supérieure à installer ou à supprimer sans interférence. Conçu pour les systèmes ferroviaires, l’appareil a un dégagement pour la plupart des systèmes ferroviaires permettre la pose et la dépose pendant que le supérieur est maintenu solidement. Est titulaire de récepteur de l’intérieur via le chemin de roulement boulon transporteur et charge poignée raceway au moyen d’une interface « T ». Les pattes avant et arrière sont contrôlés avec le récepteur de tout fond plat. Compatible avec les récepteurs milspec dimensionné et récepteurs de billette utilisant milspec dimensions internes. L’appareil ne contacte pas le prolongement du canon et n’est pas sensible de calibre. Un rail Picatinny précis, avec l’énumération, permet pour la réparation ou la configuration optique rapide. Une longe est fournie pour garder les pièces à main et aider à prévenir une chute. Une détente de ressort interne permet une application verticale sans perte de contrôle. A2 et alignement de printemps M4 mire tension et enlèvement est construit. Canal de retrait Assist avant en pointe. « Glissière » style creux permet d’éjection ouverture de porte et d’essais.
Plus...
Évaluations client de THE DEVICE MANUFACTURING. MK1MOD0 DEVICE
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Rock solid(24.12.2016)
This thing is built rock solid and has worked on all of my milspec uppers. I like the rail on the bottom that you can use for scope mounting. If you are sick of poorly made/ar blocks, or build multiple ar's a year this is for you. Only down side is the coar
MK1MOD0 Device(26.08.2017)
I have tried a ton of tools and fixtures to install barrels and rails on the M16/M4 platform. This is the best tool I have used to date. Can't wait for the SR25/AR10 version to come out. Price is high but worth it. Way better than the reaction rod. Thank you.
The Device(29.06.2018)
I got this when it was new. Before it was at Brownell's. Heard about it locally and had to check it out.There have been some minor modifications since, all for the better, but mine is still going strong. Do you want to lock an upper in and do whatever you want to with it? This is the "Device" for you. Do you want to tweak a scope? flip it over. This thing is made to last, kinda taking us back to when craftsmanship was a thing. The price is up there, but do you want to buy one, or 4 of the same thing? Comes out to be cheaper in the end. I just re-read my post, and it sounds like a plug...well it kind of is. I friggin' love this thing. It does everything it is supposed to do. Put that barrel on with something else, then use this...You will know what I mean.
Référence: 100022745 THE DEVICE MANUFACTURING. MK1MOD0 DEVICE Ref Fabricant: MK1MOD0DEVICE Luminaire de Upper Receiver AR de qualité professionnelle. Appareil robuste conçu pour les années d’utilisation intensive. Interface rapide et intuitive qui permet la construction/reconstruction rapide et la réparation de l’ensemble récepteur supérieur de la famille AR15/M16/M4 de fusils/carabines/pistolets. Conçu pour permettre à toutes les parties de carcasse supérieure à installer ou à supprimer sans interférence. Conçu pour les systèmes ferroviaires, l’appareil a un dégagement pour la plupart des systèmes ferroviaires permettre la pose et la dépose pendant que le supérieur est maintenu solidement. Est titulaire de récepteur de l’intérieur via le chemin de roulement boulon transporteur et charge poignée raceway au moyen d’une interface « T ». Les pattes avant et arrière sont contrôlés avec le récepteur de tout fond plat. Compatible avec les récepteurs milspec dimensionné et récepteurs de billette utilisant milspec dimensions internes. L’appareil ne contacte pas le prolongement du canon et n’est pas sensible de calibre. Un rail Picatinny précis, avec l’énumération, permet pour la réparation ou la configuration optique rapide. Une longe est fournie pour garder les pièces à main et aider à prévenir une chute. Une détente de ressort interne permet une application verticale sans perte de contrôle. A2 et alignement de printemps M4 mire tension et enlèvement est construit. Canal de retrait Assist avant en pointe. « Glissière » style creux permet d’éjection ouverture de porte et d’essais.
469.9CHF4CHF 469.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Couleur: NoirFinition: Type III AndodizedManufacture: AR-15Matériaux: Aluminum 7075-T6
Professional Grade AR Upper Receiver Fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the AR15/M16/M4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the Device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "T" interface. Front and rear lugs are controlled along with the entire bottom receiver flat. Compatible with milspec dimensioned receivers and billet receivers utilizing milspec internal dimensions. The Device does not contact barrel extension and is not caliber sensitive. Accurate Picatinny rail, with enumeration, allows for quick optic set-up or repair. A lanyard is provided to keep parts at-hand and help prevent dropping. An internal spring loaded detent allows for vertical application without loss of control. A2 and M4 rear sight tension spring alignment and removal is built in. Forward Assist removal channel in base. "Bolt carrier" style recesses allows Ejection Port door opening and testing.
Plus...
Luminaire de Upper Receiver AR de qualité professionnelle. Appareil robuste conçu pour les années d’utilisation intensive. Interface rapide et intuitive qui permet la construction/reconstruction rapide et la réparation de l’ensemble récepteur supérieur de la famille AR15/M16/M4 de fusils/carabines/pistolets. Conçu pour permettre à toutes les parties de carcasse supérieure à installer ou à supprimer sans interférence. Conçu pour les systèmes ferroviaires, l’appareil a un dégagement pour la plupart des systèmes ferroviaires permettre la pose et la dépose pendant que le supérieur est maintenu solidement. Est titulaire de récepteur de l’intérieur via le chemin de roulement boulon transporteur et charge poignée raceway au moyen d’une interface « T ». Les pattes avant et arrière sont contrôlés avec le récepteur de tout fond plat. Compatible avec les récepteurs milspec dimensionné et récepteurs de billette utilisant milspec dimensions internes. L’appareil ne contacte pas le prolongement du canon et n’est pas sensible de calibre. Un rail Picatinny précis, avec l’énumération, permet pour la réparation ou la configuration optique rapide. Une longe est fournie pour garder les pièces à main et aider à prévenir une chute. Une détente de ressort interne permet une application verticale sans perte de contrôle. A2 et alignement de printemps M4 mire tension et enlèvement est construit. Canal de retrait Assist avant en pointe. « Glissière » style creux permet d’éjection ouverture de porte et d’essais.
Plus...
Évaluations client de THE DEVICE MANUFACTURING. MK1MOD0 DEVICE
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Rock solid(24.12.2016)
This thing is built rock solid and has worked on all of my milspec uppers. I like the rail on the bottom that you can use for scope mounting. If you are sick of poorly made/ar blocks, or build multiple ar's a year this is for you. Only down side is the coar
MK1MOD0 Device(26.08.2017)
I have tried a ton of tools and fixtures to install barrels and rails on the M16/M4 platform. This is the best tool I have used to date. Can't wait for the SR25/AR10 version to come out. Price is high but worth it. Way better than the reaction rod. Thank you.
The Device(29.06.2018)
I got this when it was new. Before it was at Brownell's. Heard about it locally and had to check it out.There have been some minor modifications since, all for the better, but mine is still going strong. Do you want to lock an upper in and do whatever you want to with it? This is the "Device" for you. Do you want to tweak a scope? flip it over. This thing is made to last, kinda taking us back to when craftsmanship was a thing. The price is up there, but do you want to buy one, or 4 of the same thing? Comes out to be cheaper in the end. I just re-read my post, and it sounds like a plug...well it kind of is. I friggin' love this thing. It does everything it is supposed to do. Put that barrel on with something else, then use this...You will know what I mean.