Two-piece, slide-on replacement for factory floorplate has a smoothly contoured, easy-to-grasp finger loop that helps you perform lightning-fast magazine changes in high stress situations. Aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Also cushions magazine from impact when dropped concrete or other hard surfaces. Made from tough, yet soft, non-slip synthetic rubber over a stainless steel core that snaps into a reinforced polymer insert to keep the Rangerplate firmly locked to the magazine. Includes molded-in para-cord hole for custom loop configurations. Sold in 3-paks and available in Black, Dark Earth and O.D. Green.
SPECS: Synthetic rubber, stainless steel, and reinforced polymer. Fits 20- and 30-round USGI-style magazines. Instructions included. Sold in 3-paks.
Altro...
Più facile Mag modifiche con un solo dito
Sostituzione di due pezzi, slide-on per piastra di fabbrica ha un ciclo di liscio sagomato, facile da afferrare il dito che consente di eseguire modifiche rivista fulmineo in situazioni di stress elevato. AIDS nell'estrazione veloce, positivo dalle buste mag stretto e aiuta che aggrapparsi caricatore vuoto con solo un dito dopo un ricaricamento tattico. Anche la rivista cuscini da impatto quando è sceso di cemento o altre superfici dure. Realizzato da duro, ancora morbido, antiscivolo in gomma sintetica sopra un nucleo di acciaio inossidabile che scatta in un polimero rinforzato inserire per mantenere il Rangerplate bloccato saldamente alla rivista. Include foro stampato in para-cavo per configurazioni personalizzate di ciclo. Venduto in 3-paks e disponibile in nero, Dark Earth e D.E. verde.
Specifiche: polimero rinforzato, in acciaio inox e gomma sintetica. Si inserisce il 20 - 30-round e riviste USGI-stile. Istruzioni incluse. Venduto in 3-paks.
Altro...
Punteggi dei clienti per MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.4
These floor plates are the "cats meow"!!(29.03.2010)
These floor plates are great when the mag pouch you are using is "deeper" than the mag is long. Simply hook a finger into the floor plate and pull. They are relatively inexpensive and easy to install. I have them on ALL my AR mags.
The only "con" is that when they are installed, they limit a 30rd mag to 29rds, especially if you have the good Gen 3 anti-tilt followers installed. This is due to the way the floor plates are locked into the mag. The floor plate lock takes up about 1 cartridge height of space right above the floor plate, inside of the mag. When used with the Gen 3 anti-tilt follower (Magpul), the follower bottoms out on top of the lock at round cartridge number 29.
What I've done to "improvise, overcome & adapt" this problem, is to take the anti-tilt follower and put each leg to a grinding wheel so that approx. 1/4" inch is taken off of the follower. The follower still retains its' anti-tilt abilities but also lets the user stuff the mag with the intended 30rnds.
THAT is why I only gave the floor plates a "4" rating. Other than that, yes, they really are the "cat's meow"!!
Easy to grab(21.12.2010)
Easy to grab, and easy to instal on most of my mags. They do reduce a 30 round mag to 29 but they are fine on the Canadian LAR-15 10 round mags.
Loss of a round(22.02.2011)
I ordered two packages of this item. After installation on the Brownells 30 rd mags, I found that the plastic base that has to be installed causes you to lose one round making the mag lite 1 rnd. Overall I like the product and makes it much easier to retrieve the next mag from the pouch. The only negative is the loss of that one round that could make the difference between living or dying.
Good once installed(05.12.2011)
These Ranger plates are a great addition to the M16/M4/AR15 magazine. They provide easier acqusition from a mag pouch and alsohelp with inserting the mag, The rubber grip contours nicely with a "beer can" grip.
There is only one real drawback (aside from the annoyance of getting them installed) is that they only hold 28 rounds. The packaging itself says not to load more than 28 rounds because it can affect feeding. Not much of an issue for those of us north of the border as our 30 round mags are all capped at 5. To those who enjoy high capacity mags, you'll have to run 2 short.
On Every Mag I Can Put It On!(11.05.2012)
Not only aids in grasping the magazine, but more importantly turns the mag into a monopod. The only downside is that it extends the length of the magazine so it may not longer fit in closed-top pouches, such as found in a lot of tactical vests. Easily solved by adding a velcro extension to most vest closures...
N. prodotto: 100002196 MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK Parti Fabbricante: MAG020BLK873750000015 Sostituzione di due pezzi, slide-on per piastra di fabbrica ha un ciclo di liscio sagomato, facile da afferrare il dito che consente di eseguire modifiche rivista fulmineo in situazioni di stress elevato. AIDS nell'estrazione veloce, positivo dalle buste mag stretto e aiuta che aggrapparsi caricatore vuoto con solo un dito dopo un ricaricamento tattico. Anche la rivista cuscini da impatto quando è sceso di cemento o altre superfici dure. Realizzato da duro, ancora morbido, antiscivolo in gomma sintetica sopra un nucleo di acciaio inossidabile che scatta in un polimero rinforzato inserire per mantenere il Rangerplate bloccato saldamente alla rivista. Include foro stampato in para-cavo per configurazioni personalizzate di ciclo. Venduto in 3-paks e disponibile in nero, Dark Earth e D.E. verde.
Adatto per:
AR-15
Colore:
Black
Peso della spedizione: 0.077kgAltezza: 25mmLarghezza: 94mmLunghezza: 173mm
Dettagli dell'elemento
Made in Usa
Sale
N. prodotto: 100003720 MAGPUL RANGER FLOORPLATE, 3-PAK, DARK EARTH Parti Fabbricante: MAG020FDE873750000282 Sostituzione di due pezzi, slide-on per piastra di fabbrica ha un ciclo di liscio sagomato, facile da afferrare il dito che consente di eseguire modifiche rivista fulmineo in situazioni di stress elevato. AIDS nell'estrazione veloce, positivo dalle buste mag stretto e aiuta che aggrapparsi caricatore vuoto con solo un dito dopo un ricaricamento tattico. Anche la rivista cuscini da impatto quando è sceso di cemento o altre superfici dure. Realizzato da duro, ancora morbido, antiscivolo in gomma sintetica sopra un nucleo di acciaio inossidabile che scatta in un polimero rinforzato inserire per mantenere il Rangerplate bloccato saldamente alla rivista. Include foro stampato in para-cavo per configurazioni personalizzate di ciclo. Venduto in 3-paks e disponibile in nero, Dark Earth e D.E. verde.
27.9CHF72CHF 27.90
*CHF 32.90
Tempi di consegna circa 2-4 giorni.
Caratteristiche:Adatto per: AR-15Colore: Dark Earth
N. prodotto: 100003721 MAGPUL RANGER FLOORPLATE, 3-PAK, O.D. GREEN Parti Fabbricante: MAG020-ODG873750000275 Sostituzione di due pezzi, slide-on per piastra di fabbrica ha un ciclo di liscio sagomato, facile da afferrare il dito che consente di eseguire modifiche rivista fulmineo in situazioni di stress elevato. AIDS nell'estrazione veloce, positivo dalle buste mag stretto e aiuta che aggrapparsi caricatore vuoto con solo un dito dopo un ricaricamento tattico. Anche la rivista cuscini da impatto quando è sceso di cemento o altre superfici dure. Realizzato da duro, ancora morbido, antiscivolo in gomma sintetica sopra un nucleo di acciaio inossidabile che scatta in un polimero rinforzato inserire per mantenere il Rangerplate bloccato saldamente alla rivista. Include foro stampato in para-cavo per configurazioni personalizzate di ciclo. Venduto in 3-paks e disponibile in nero, Dark Earth e D.E. verde.
33.9CHF346CHF 33.90
*
Tempi di consegna circa 8-15 giorni.
Caratteristiche:Adatto per: AR-15Colore: O.D. Green
Two-piece, slide-on replacement for factory floorplate has a smoothly contoured, easy-to-grasp finger loop that helps you perform lightning-fast magazine changes in high stress situations. Aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Also cushions magazine from impact when dropped concrete or other hard surfaces. Made from tough, yet soft, non-slip synthetic rubber over a stainless steel core that snaps into a reinforced polymer insert to keep the Rangerplate firmly locked to the magazine. Includes molded-in para-cord hole for custom loop configurations. Sold in 3-paks and available in Black, Dark Earth and O.D. Green.
SPECS: Synthetic rubber, stainless steel, and reinforced polymer. Fits 20- and 30-round USGI-style magazines. Instructions included. Sold in 3-paks.
Altro...
Più facile Mag modifiche con un solo dito
Sostituzione di due pezzi, slide-on per piastra di fabbrica ha un ciclo di liscio sagomato, facile da afferrare il dito che consente di eseguire modifiche rivista fulmineo in situazioni di stress elevato. AIDS nell'estrazione veloce, positivo dalle buste mag stretto e aiuta che aggrapparsi caricatore vuoto con solo un dito dopo un ricaricamento tattico. Anche la rivista cuscini da impatto quando è sceso di cemento o altre superfici dure. Realizzato da duro, ancora morbido, antiscivolo in gomma sintetica sopra un nucleo di acciaio inossidabile che scatta in un polimero rinforzato inserire per mantenere il Rangerplate bloccato saldamente alla rivista. Include foro stampato in para-cavo per configurazioni personalizzate di ciclo. Venduto in 3-paks e disponibile in nero, Dark Earth e D.E. verde.
Specifiche: polimero rinforzato, in acciaio inox e gomma sintetica. Si inserisce il 20 - 30-round e riviste USGI-stile. Istruzioni incluse. Venduto in 3-paks.
Altro...
Punteggi dei clienti per MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.4
These floor plates are the "cats meow"!!(29.03.2010)
These floor plates are great when the mag pouch you are using is "deeper" than the mag is long. Simply hook a finger into the floor plate and pull. They are relatively inexpensive and easy to install. I have them on ALL my AR mags.
The only "con" is that when they are installed, they limit a 30rd mag to 29rds, especially if you have the good Gen 3 anti-tilt followers installed. This is due to the way the floor plates are locked into the mag. The floor plate lock takes up about 1 cartridge height of space right above the floor plate, inside of the mag. When used with the Gen 3 anti-tilt follower (Magpul), the follower bottoms out on top of the lock at round cartridge number 29.
What I've done to "improvise, overcome & adapt" this problem, is to take the anti-tilt follower and put each leg to a grinding wheel so that approx. 1/4" inch is taken off of the follower. The follower still retains its' anti-tilt abilities but also lets the user stuff the mag with the intended 30rnds.
THAT is why I only gave the floor plates a "4" rating. Other than that, yes, they really are the "cat's meow"!!
Easy to grab(21.12.2010)
Easy to grab, and easy to instal on most of my mags. They do reduce a 30 round mag to 29 but they are fine on the Canadian LAR-15 10 round mags.
Loss of a round(22.02.2011)
I ordered two packages of this item. After installation on the Brownells 30 rd mags, I found that the plastic base that has to be installed causes you to lose one round making the mag lite 1 rnd. Overall I like the product and makes it much easier to retrieve the next mag from the pouch. The only negative is the loss of that one round that could make the difference between living or dying.
Good once installed(05.12.2011)
These Ranger plates are a great addition to the M16/M4/AR15 magazine. They provide easier acqusition from a mag pouch and alsohelp with inserting the mag, The rubber grip contours nicely with a "beer can" grip.
There is only one real drawback (aside from the annoyance of getting them installed) is that they only hold 28 rounds. The packaging itself says not to load more than 28 rounds because it can affect feeding. Not much of an issue for those of us north of the border as our 30 round mags are all capped at 5. To those who enjoy high capacity mags, you'll have to run 2 short.
On Every Mag I Can Put It On!(11.05.2012)
Not only aids in grasping the magazine, but more importantly turns the mag into a monopod. The only downside is that it extends the length of the magazine so it may not longer fit in closed-top pouches, such as found in a lot of tactical vests. Easily solved by adding a velcro extension to most vest closures...