Il Carrello è vuoto.

Carrello

0917309915

M4 SKINNY STYLE CARBINE HANDGUARD

841348100201 100004515

Rugged, Drop-In Replacement For M4-Style Factory Handguard

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Altro...

Robusto, sostituzione per M4-stile fabbrica Handguard

Lo snap-in sostituzione di USGI-tipo per handguard di fabbrica originali di arma fatta di polimero duro, rinforzato con fibra di vetro, stampato ad iniezione che fornisce la resistenza di abrasione e di impatto superiore. La superficie rigata di presa e fori di ventilazione superiore/inferiore mantengono autentico look militare dell'arma, mentre un interno scudo termico di alluminio leggero protegge la mano dal calore della canna. Modelli skinny hanno standard-questione monostrato scudo termico handguard superiore e inferiore. Modello skinny M4 ha diametro più stretto per gli operatori che preferiscono un handguard di massa minima. Si inserisce il AR-15/M16/M4 con impianto a gas carabina di lunghezza.

Specifiche: polimero rinforzato con fibra di vetro, nero opaco. 6½"(16.5 cm) lungh. magro – ca. 2¼" O.D. alla rastremazione posteriore a 2"(5.1 cm) O.D. alla parte anteriore. Singolo scudo termico solo.

Altro...

Punteggi dei clienti per DOUBLE STAR SKINNY M4 CARBINE HANDGUARD

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5

I would buy these again (11.05.2013)

Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers

Highly Recommended (05.07.2013)

Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells

For a better small hand fit (28.05.2014)

These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.

Great handguards (21.04.2015)

Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!

<img width="500" src='/userdocs/reviewimages/791c1e79-8272-4ac8-b7eb-5982a9c71a2b.jpg' alt=''>

Great replacement handguard (05.10.2015)

Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.

Great product but does not fit Bushmaste (03.11.2015)

I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.

Excellent - will buy again (20.07.2016)

Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.

Great Handguard, with a little fitting (28.06.2017)

Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs

Worth Much More ! (18.06.2018)

I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.

Great and unbelievable low price (04.07.2018)

Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.

Leggi più recensioni su brownells.com

21.9 21.9 1 CHF

N. prodotto: 100004515
DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Parti Fabbricante: AR414 841348100201 Lo snap-in sostituzione di USGI-tipo per handguard di fabbrica originali di arma fatta di polimero duro, rinforzato con fibra di vetro, stampato ad iniezione che fornisce la resistenza di abrasione e di impatto superiore. La superficie rigata di presa e fori di ventilazione superiore/inferiore mantengono autentico look militare dell'arma, mentre un interno scudo termico di alluminio leggero protegge la mano dal calore della canna. Modelli skinny hanno standard-questione monostrato scudo termico handguard superiore e inferiore. Modello skinny M4 ha diametro più stretto per gli operatori che preferiscono un handguard di massa minima. Si inserisce il AR-15/M16/M4 con impianto a gas carabina di lunghezza.

21.9 CHF 292 CHF 21.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15 Colore: Black Lunghezza: 6 Materiale: Polymer Tipo: Smooth Tipo: Drop-In

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Colore: Black Lunghezza: 6 Materiale: Polymer Tipo: Smooth Tipo: Drop-In Peso della spedizione: 0.136kg Altezza di spedizione: 58mm Larghezza di spedizione: 58mm Lunghezza di spedizione: 185mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.y.1

Rugged, Drop-In Replacement For M4-Style Factory Handguard

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Altro...

Robusto, sostituzione per M4-stile fabbrica Handguard

Altro...

Punteggi dei clienti per DOUBLE STAR SKINNY M4 CARBINE HANDGUARD

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 5

I would buy these again (11.05.2013)

Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers

Highly Recommended (05.07.2013)

Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells

For a better small hand fit (28.05.2014)

Great handguards (21.04.2015)

Great replacement handguard (05.10.2015)

Great product but does not fit Bushmaste (03.11.2015)

Excellent - will buy again (20.07.2016)

Great Handguard, with a little fitting (28.06.2017)

Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs

Worth Much More ! (18.06.2018)

Great and unbelievable low price (04.07.2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

B5 SYSTEMS CAR-15 BUTTSTOCK MIL-SPEC BLACK
CAR-15 BUTTSTOCK MIL-SPEC

B5 SYSTEMS

In magazzino

CHF 74.90 *

Calci

BROWNELLS AR-15/M16 XM177 FLASH HIDER & GRENADE RING
AR-15/M16 XM177 FLASH HIDER & GRENADE RING

BROWNELLS

In magazzino

CHF 64.90 *

Flash Hiders

BROWNELLS BUFFER TUBE 2 POSITION MIL-SPEC ANODIZED GREY
AR-15/M16 BUFFER TUBE 2 POSITION MIL-SPEC RETRO

BROWNELLS

In magazzino

CHF 43.90 *

Buffer tubes

BROWNELLS M16A1 AR15 PISTOL GRIP - BLACK
AR-15 RETRO PISTOL GRIP

BROWNELLS

Riordinato

CHF 19.90 *

Pistol grip

4.3

BRAVO COMPANY MOD-3 GUNFIGHTER GRIP POLYMER BLACK
AR-15 MOD-3 GUNFIGHTER GRIP

BRAVO COMPANY

In magazzino

CHF 29.90 * CHF 29.90 - CHF 31.90*

Pistol grip

4.5

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.