Top Takeaways
- Hohe Drehmomentanwendung
- Bewegung während des Drehens eliminieren
- 360° Arbeitsbereich
Eigenschaften
- Waffentyp: AR-15
- Versandgewicht: 0.93kg
- Versandhöhe: 284mm
- Versandbreite: 18mm
- Versandlänge: 30mm
- UPC: 854014005977
Artikel-Nr.: 100016577
Herst.-Nr.: 15-193
854014005977 Die Super Reaction Rod wurde entwickelt, um den Bedürfnissen eines fortgeschrittenen Waffenmeisters gerecht zu werden, der häufig an AR-15/M4-Plattformen mit überdrehte, festsitzende oder mit Loctite gesicherte Laufmuttern arbeitet. Die Super Reaction Rod funktioniert, indem sie die Lugs der Laufverlängerung vorbelastet, um die Lugs der Super Reaction Rod zu fixieren und so die Bewegung zu eliminieren, die durch das Hinzufügen von Drehmoment zur Laufmutter entsteht, während gleichzeitig der obere Receiver fixiert bleibt. Wenn die Laufverlängerung mit den Lugs der Super Reaction Rod verbunden und der obere Receiver vor dem Anziehen fixiert ist, wird der Stress, der auf den Indexstift ausgeübt werden könnte, entfernt. Dies ermöglicht es dem Waffenmeister, enormes Drehmoment auf die Laufmutter auszuüben, um festsitzende Muttern zu lösen. Das Vorbelastungssystem der Super Reaction Rod kann auch entfernt werden, sodass sie wie eine Standard Reaction Rod funktioniert, was es ermöglicht, Arbeiten am oberen Receiver in einem 360°-Bereich sowohl vertikal als auch horizontal durchzuführen.Excellent 09.07.2015
Received my super reaction rod today. While it was expensive, I can tell you that this is high quality. So basically you unscrew and remove the 2 brass wedge clamps before sliding the tool into the upper. Fits perfectly, now after the rod is loaded into the receiver you then reinstall the brass wedge clamps. Depending on whether you're loosening or tightening a barrel nut determines which gets put in and tightened first. If you are removing a barrel but or let's say taking off your flash hider, you will want to tighten the front/muzzle end screw first. This takes up all the slack "preload", putting the device in the optimal place to give you the most torque. To tighten just do the opposite. Simple design, yet revolutionary in the fact I can now lock my upper in place (to torque) forces. The old upper receiver vise block... I'll put that in the box with all the other old tools. Maybe I'll need it in the future, but the super reaction rod provides a much more stable platform. I can now work on my AR at any angle as long as the rod is in the barrel nut cut outs, and it differs from the others because you can actually lock it in place. I highly recommend this product, outperforms the old model, and model that I've used previously.
Great tool for your bench 30.06.2015
This tool is probably one of my favorites. It takes away from the possibility of ruining your upper receiver when installing a new barrel. I cannot find myself going back to the receiver block in order to properly torque a barrel onto a receiver. A very valuable tool to have.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.