Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
682157948734 100044392
The Enhanced Magazine Release-Continuous Serrations features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self-centering surface that inhibits the finger's vertical movements. The EMR-HC has an uninterrupted surface and serrations, its taller profile makes it easier to press and is only 0.04 taller than the factory magazine release button. When installed, the EMR-HC has a 0.08 protrusion above the mag release button fence on most forged receivers. Due to the EMR-HC's installed height which protrudes 0.08"" over the mag release fence when installed (only 0.06" or 0.07" of the magazine release button travel is needed to drop a magazine), EMR-HC is recommended for 7.62mm ARs only, though it does work on 5.56mm ARs and M16s.  For defense and duty ARs and M16s, please use Forward Control Design’s EMR that has only a 0.01" protrusion over most forged receiver magazine release fence. For .308 ARs, the EMR-HC's taller profile will allow you to use AR15/M16 spec mag catch and ambidextrous mag catch/release.  An EMR-HC installed on a .308 AR will not protrude over the mag release fence. Machined in 4140 steel and QPQ treated.    308 AR 4140 steel QPQ treated Blind hole magazine release button Curved and serrated or dimpled surface
28.9 28.9 2 CHF
Référence: 100044392
FORWARD CONTROLS DESIGN AR .308 ENHANCED MAGAZINE RELEASE BUTTON DIMPLED
Ref Fabricant: EMR-HC, AA (DIM 682157948734
28.9 CHF 1 CHF 28.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: AR .308

Caractéristiques

Manufacture: AR .308 Poids du colis: 0.018kg Hauteur d'expédition: 25mm Largeur d'expédition: 83mm Longueur d'expédition: 140mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x



Référence: 100044391
FORWARD CONTROLS DESIGN AR .308 ENHANCED MAGAZINE RELEASE BUTTON SERRATED
Ref Fabricant: EMRHCSERRATE 683828757396
28.9 CHF 6 CHF 28.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Manufacture: AR .308
The Enhanced Magazine Release-Continuous Serrations features a slightly curved button surface to fit the natural curvature of your finger. The form fitting curve, along with horizontal serrations, create a self-centering surface that inhibits the finger's vertical movements. The EMR-HC has an uninterrupted surface and serrations, its taller profile makes it easier to press and is only 0.04 taller than the factory magazine release button. When installed, the EMR-HC has a 0.08 protrusion above the mag release button fence on most forged receivers. Due to the EMR-HC's installed height which protrudes 0.08"" over the mag release fence when installed (only 0.06" or 0.07" of the magazine release button travel is needed to drop a magazine), EMR-HC is recommended for 7.62mm ARs only, though it does work on 5.56mm ARs and M16s.  For defense and duty ARs and M16s, please use Forward Control Design’s EMR that has only a 0.01" protrusion over most forged receiver magazine release fence. For .308 ARs, the EMR-HC's taller profile will allow you to use AR15/M16 spec mag catch and ambidextrous mag catch/release.  An EMR-HC installed on a .308 AR will not protrude over the mag release fence. Machined in 4140 steel and QPQ treated.    308 AR 4140 steel QPQ treated Blind hole magazine release button Curved and serrated or dimpled surface
Newsletter