Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

ULTRADYNE USA
AR-15 6.5 APOLLO S COMPENSATOR 6.5 CREEDMOOR

851019008644 100033205
From studying the movement of rifles through thousands of firings, the team at Ultradyne developed a science-based solution designed to keep shooters on target. The engineering behind the Ultradyne Apollo S 6.5 Creedmoor Compensator is one of the most-effective brake designs offered today. Built out of a desire to keep competition shooters aligned with their target during the recoil impulse, thereby allowing for easier follow-up shots and quicker transitions, the Ultradyne Apollo S is built to provide a balanced response to three elements of a rifle's firing process: felt recoil, muzzle rise and gas venting. The chambered design of the compensator therefore controls recoil and muzzle rise while keeping vented gases to a minimum, all while directing them away from the shooter to reduce blast noise and feel. Fits 5/8x24 TPI threaded muzzles For use on any .264-inch or 6.5mm caliber barrel or smaller Weight: 4.4 ounces Made in the USA The Ultradyne Apollo S 6.5 Creedmoor Compensator is machined from 416 stainless steel and can be used on the company's quick-detach Dynamounts. The unit ships with a shrouded timing nut included.
209.9 209.9 1 CHF
N. prodotto: 100033205
ULTRADYNE USA AR.308 6.5 APOLLO S COMPENSATOR 5/8X24
Parti Fabbricante: UD10250 851019008644 Da studiare il movimento dei fucili attraverso migliaia di licenziamenti, il team di Ultradyne ha sviluppato una soluzione basata sulla scienza progettata per mantenere tiratori sul bersaglio. L'ingegneria dietro il Ultradyne Apollo S 6.5 Creedmoor compensatore è uno dei disegni più efficace freno offerti oggi. Costruito dal desiderio di mantenere tiratori concorrenza allineati con loro destinazione durante l'impulso di rinculo, consentendo per scatti di follow-up più facile e più veloce transizioni, il Ultradyne Apollo S è costruito per fornire una risposta equilibrata a tre elementi di un fucile processo di cottura: Feltro rinculo, luogo museruola e scarico gas. Il design chambered del compensatore controlla quindi rinculo e aumento mentre mantenendo sfiato gas al minimo, il tutto mentre orientandoli lontano dal tiratore per ridurre sensazione e rumore di scoppio. Misura 5/8 x 24 TPI filettato museruole per uso su qualsiasi canna calibro 6,5 mm o.264-pollici o più piccolo peso: 4,4 once Made in USA The Ultradyne Apollo S 6.5 Creedmoor compensatore è lavorata da acciaio inossidabile 416 e può essere utilizzato sulla società di scollegamento rapido Dynamounts. L'unità viene fornita con un dado di temporizzazione avvolta incluso.
209.9 CHF 6 CHF 209.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR .308 Calibro: 264/6.5 mm (.264) Filetti: 5/8-24 Finitura: Nero Materiale: Acciaio inox

Caratteristiche

Adatto per: AR .308 Calibro: 264/6.5 mm (.264) Filetti: 5/8-24 Finitura: Nero Materiale: Acciaio inox Peso della spedizione: 0.191kg Altezza di spedizione: 51mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 102mm

Dettagli dell'elemento

Made in Usa



From studying the movement of rifles through thousands of firings, the team at Ultradyne developed a science-based solution designed to keep shooters on target. The engineering behind the Ultradyne Apollo S 6.5 Creedmoor Compensator is one of the most-effective brake designs offered today. Built out of a desire to keep competition shooters aligned with their target during the recoil impulse, thereby allowing for easier follow-up shots and quicker transitions, the Ultradyne Apollo S is built to provide a balanced response to three elements of a rifle's firing process: felt recoil, muzzle rise and gas venting. The chambered design of the compensator therefore controls recoil and muzzle rise while keeping vented gases to a minimum, all while directing them away from the shooter to reduce blast noise and feel. Fits 5/8x24 TPI threaded muzzles For use on any .264-inch or 6.5mm caliber barrel or smaller Weight: 4.4 ounces Made in the USA The Ultradyne Apollo S 6.5 Creedmoor Compensator is machined from 416 stainless steel and can be used on the company's quick-detach Dynamounts. The unit ships with a shrouded timing nut included.
Newsletter