Oversized, easy to feel bolt release button allows quick access during high stress situations when you need it most. Features a serrated face almost 1¼" long for a non-slip grip, with or without gloves. Constructed of 4140 ordnance steel with a black manganese phosphate finish for durability. Fits Benelli M1 Super 90, and M3 Super 90.
SPECS: Steel, black, matte finish. Button - 1¼" (3.2cm) long x 5⁄8" (1.6cm) high.1 oz. (28.4g) weight.
Altro...
Sovradimensionato per funzionamento rapido
Sovradimensionato, facile da sentire il pulsante di sgancio otturatore permette un rapido accesso durante situazioni di stress elevato quando ne avete bisogno più. Dispone di un seghettata affrontano quasi 1¼" lungo per un grip antiscivolo, con o senza guanti. Costruito con 4140 ordigni d'acciaio con un fosfato di manganese nero finitura per la durevolezza. Si inserisce il modello 121 Benelli M1 Super 90 e M3 Super 90 fucili di applicazione della legge.
Specifiche: acciaio, nero, finitura opaca. Pulsante - 1¼"(3,2 cm) lungo x 5 ⁄ 8" (1.6 cm) peso di once (28,4 g) high.1.
Altro...
Punteggi dei clienti per GG&G BOLT RELEASE BUTTON
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 5
I like it!(27.09.2009)
I've switched out my hunting M1's and my tactical M1's. This is a high quality product and makes releasing the bolt a breeze, especially under 3-gun competition stress. It might not really be necessary for the pheasant gun but I like it there anyway. Easy to install.
should be OEM equipment for a Benelli(17.12.2010)
Part might seem expensive for what it is but if you are a high volume shooter it is worth it. It fits all the weapons listed but I have personaly installed it on a Supersport and it functions flawlessly with no modification. Easy to install with a punch and hex wrench, just follow the included instructions.
Perfect fit on M2, well designed(23.09.2012)
I originally wanted the Nordic Components bolt release, mainly because that was used on the M2 3-Gun edition. However, Nordic required the user to drill/tap the stock latch - or buy an extra latch to drill/tap. GG&G was the only manufacturer to supply a new catch ready to install. GG&G basically faced-off the stock latch button and kept two strips of the knurled surface to prevent rotation of the button. The button itself is chamfered and smoothed out, so it doesn't feel abrasive. It has not interfered with my operation of the M2 and would highly recommend it. It is very functional. Whereas I needed to use my thumb to push down the stock button, I can use my index finger to gently release the bolt. Even Magpul's Art of the Dynamic Shotgun DVD highlighted the fact the stock button should be replaced as soon as possible. It makes me wonder why Benelli doesn't just equip all of their shotguns with a larger button. Installation can be tricky. You need a long enough punch to remove the stock rollpin. My Starrett punch wasn't long enough so I ended up re-using the factory rollpin.
Mandatory equipment on all my Benellis(05.02.2015)
I have this bolt release / shell stop on all my Benelli shotguns. I first put one on my M2 and liked it so much I added them to the following shotuns; M2, M3, M4, Supersport II and it works perfectly on all of them. I put over 25,000 rounds through my Supersport before the shell stop portion of the bolt release cracked. I can't complain about the service life of the part since most shotguns don't see that kind of firing schedule. I just bought another one and installed it in 5 minutes. I can't recommend this part any more highly.
N. prodotto: 336000006 GG&G BOLT RELEASE BUTTON Parti Fabbricante: GGG1030813157000300 Sovradimensionato, facile da sentire il pulsante di sgancio otturatore permette un rapido accesso durante situazioni di stress elevato quando ne avete bisogno più. Dispone di un seghettata affrontano quasi 1¼" lungo per un grip antiscivolo, con o senza guanti. Costruito con 4140 ordigni d'acciaio con un fosfato di manganese nero finitura per la durevolezza. Si inserisce il modello 121 Benelli M1 Super 90 e M3 Super 90 fucili di applicazione della legge.
174.9CHF15CHF 174.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: BenelliModello: Super 90
Adatto per:
Benelli
Modello:
Super 90
Peso della spedizione: 0.023kgAltezza di spedizione: 23mmLarghezza di spedizione: 84mmLunghezza di spedizione: 112mm
Oversized, easy to feel bolt release button allows quick access during high stress situations when you need it most. Features a serrated face almost 1¼" long for a non-slip grip, with or without gloves. Constructed of 4140 ordnance steel with a black manganese phosphate finish for durability. Fits Benelli M1 Super 90, and M3 Super 90.
SPECS: Steel, black, matte finish. Button - 1¼" (3.2cm) long x 5⁄8" (1.6cm) high.1 oz. (28.4g) weight.
Altro...
Sovradimensionato per funzionamento rapido
Sovradimensionato, facile da sentire il pulsante di sgancio otturatore permette un rapido accesso durante situazioni di stress elevato quando ne avete bisogno più. Dispone di un seghettata affrontano quasi 1¼" lungo per un grip antiscivolo, con o senza guanti. Costruito con 4140 ordigni d'acciaio con un fosfato di manganese nero finitura per la durevolezza. Si inserisce il modello 121 Benelli M1 Super 90 e M3 Super 90 fucili di applicazione della legge.
Specifiche: acciaio, nero, finitura opaca. Pulsante - 1¼"(3,2 cm) lungo x 5 ⁄ 8" (1.6 cm) peso di once (28,4 g) high.1.
Altro...
Punteggi dei clienti per GG&G BOLT RELEASE BUTTON
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 5
I like it!(27.09.2009)
I've switched out my hunting M1's and my tactical M1's. This is a high quality product and makes releasing the bolt a breeze, especially under 3-gun competition stress. It might not really be necessary for the pheasant gun but I like it there anyway. Easy to install.
should be OEM equipment for a Benelli(17.12.2010)
Part might seem expensive for what it is but if you are a high volume shooter it is worth it. It fits all the weapons listed but I have personaly installed it on a Supersport and it functions flawlessly with no modification. Easy to install with a punch and hex wrench, just follow the included instructions.
Perfect fit on M2, well designed(23.09.2012)
I originally wanted the Nordic Components bolt release, mainly because that was used on the M2 3-Gun edition. However, Nordic required the user to drill/tap the stock latch - or buy an extra latch to drill/tap. GG&G was the only manufacturer to supply a new catch ready to install. GG&G basically faced-off the stock latch button and kept two strips of the knurled surface to prevent rotation of the button. The button itself is chamfered and smoothed out, so it doesn't feel abrasive. It has not interfered with my operation of the M2 and would highly recommend it. It is very functional. Whereas I needed to use my thumb to push down the stock button, I can use my index finger to gently release the bolt. Even Magpul's Art of the Dynamic Shotgun DVD highlighted the fact the stock button should be replaced as soon as possible. It makes me wonder why Benelli doesn't just equip all of their shotguns with a larger button. Installation can be tricky. You need a long enough punch to remove the stock rollpin. My Starrett punch wasn't long enough so I ended up re-using the factory rollpin.
Mandatory equipment on all my Benellis(05.02.2015)
I have this bolt release / shell stop on all my Benelli shotguns. I first put one on my M2 and liked it so much I added them to the following shotuns; M2, M3, M4, Supersport II and it works perfectly on all of them. I put over 25,000 rounds through my Supersport before the shell stop portion of the bolt release cracked. I can't complain about the service life of the part since most shotguns don't see that kind of firing schedule. I just bought another one and installed it in 5 minutes. I can't recommend this part any more highly.