Votre panier est vide.

Panier

0917309915

SILENCERCO
BERETTA 92FS/M9 THREADED BARREL

816413022580 100023757

Sets You Up To Shoot Your Beretta With a Sound Suppressor

The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel turns your “Plain-Jane” Beretta into a suppressor ready host. The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel does not require an XL piston. A normal ½"-28 tpi piston will provide reliable function. Threaded 1/2"-28 to accept a wide variety of pistol suppressors 1-10" twist rate Machined from 416R stainless steel Nonreflective black nitride finish Silencerco's Beretta 92F / 92FS / M9 Threaded Pistol Barrel comes ready drop-in into your pistol, and each ships with a thread protector to guard against damage to the threads when you're shooting unsuppressed.

Plus...

Vous définit jusqu'à tirer votre Beretta avec un suppresseur sonore

Le Silencerco Beretta 92F / 92FS / M9 fileté pistolet Canon transforme votre Beretta « Plat » en une multitude de prêt suppresseur. Le Silencerco Beretta 92F / 92FS / M9 fileté pistolet Canon ne nécessite pas un piston XL. Un piston normale ½"-28 tpi fournira la fonction fiable. Fileté 1/2"-28 d’accepter une grande variété de pistolet suppresseurs 1-10 » taux de rotation usiné de nitrure noir antireflets de 416R en acier inoxydable finition Beretta de Silencerco 92F / 92FS / M9 fileté pistolet Canon vient prête encastrées dans votre pistolet, et chacun est livré avec un protecteur de fil se prémunir contre les dommages aux filets lorsque vous filmez annulée.

Plus...

Évaluations client de SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.9

Great barrel. (07.08.2017)

I picked up a used Beretta 92FS and this barrel went on sale the following day. Purchased the parts needed to complete the barrel assembly from Beretta. I took the gun to the range this past weekend and put 100 rounds through it with and without a supressor. Flawless. Great addition to the gun.

Bad experience, possible lemon (21.09.2017)

My well-used locking block would NOT fit into this Silencerco threaded barrel without modification - modification I wasn't willing to do. I initially thought the locking block was catching at the rear of the barrel, but it's also possible that the groove in the front was machined too narrowly, making the locking block unable to pivot all the way down. It would take a good amount of sanding for the locking block to slide freely like it does in my OEM Beretta barrel. IMO, this is unacceptable for a part that's A) supposedly "drop-in", and B) made for one of the most common supressor-hosts on the market. I should note this could have just been a lemon, or part of a bad batch (9/2017). Machining quality wasn't great, either, as there were machining lines around the chamber area, and the thread protector was not as well finished as my Silencerco Glock 34 barrel's, which I am COMPLETELY satisfied with. This 92 barrel, though, will be going back to Brownells as my first-ever return.

Silencerco Beretta 92FS Barrel Fitment (22.12.2017)

It's a shame I had to return this barrel. A factory new Beretta Locking Block would not fit properly. Had to almost force the block into position in the barrel then the block would not move/pivot as it should. This should be a drop in fit and I will not do any fitting to make it work.

Works with military surplus 92s model (17.02.2018)

I bought a beretta 92s model and wanted to shoot surpressed. I was pleasenly surprised that it dropped right in. I also bought a factory beretta upgraded locking block kit from brownells so I didnât have to reuse the original block from the old barrel.

The barrel fit and finished is just what I was hoping for and now I can use my liberty mystic x :)

Happy shooting!

Nice upgrade! (03.03.2018)

Silencerco has a winner with the Beretta 92 threaded barrel upgrade. I wanted to get my 92fs suppressor ready and they have it at a great price. Switching out the locking block from old to new was simple and easy. After the install, I gave it a test with 250 rounds and I found no differences at all with ..wellâ¦.. anything! It performed flawlessly and with same accuracy as I know my weapon.

This barrel is not chrome-lined like the Beretta original, however it is made of 416R steel with the same twist rate. After my test of 250, I cleaned and inspected the barrel and found no issues. I consider this a great choice for an upgrade and recommend if youâre ready to upgrade.

92s (21.05.2018)

Had to take a dremmel to it in order for the locking block to fit item needs a minor gunsmithing note added i by no means am one but just had to remove a few 1000âs of an inch. Fires very well no FTE or FTF on it yet. I had to send my HK barrel back because it FTE If itâs a range toy by all means go for it, for EDC I wouldnât trust anything but the original manufacturer barrels.

Works nice (11.10.2018)

This works pretty nice. I orderd a piston from silencerco to swap out on my osprey can so I can use it with this that I'm still waiting on, but I put around 250 rounds through it just with the barrel alone. It worked well while I was hitting a bunch of steel targets and using various ammo. I used the locking block from my stock barrel. There is a pin to knock out, then you just slide the little rear pin out and then the block can come out, I reused the pins on the new barrel as well. The extra little bit of barrel is also kind of cool I think. It will stick out of your holsters a little though. The one thing that I had after install was some stiffness with the slide. Just make sure you lube everything and rack it a good number of times to help break it in some before you shoot so that that break in process can go smoothly as well. I did have some hangups with some reloads but I think that fault was on my end and some 147gr winchester ammo a friend had me try, it did get stuck a couple times. I don't know if that was all just breakin kinks or what but my 124gr and 115gr ammo ran perfect. 124gr is my favored ammo for the full size 9mm.

Lire 7 plus d'avis sur brownells.com

279.9 279.9 1 CHF

Référence: 100023757
SILENCERCO BERETTA 92FS/M9 THREADED BARREL
Ref Fabricant: AC2291 816413022580 Le Silencerco Beretta 92F / 92FS / M9 fileté pistolet Canon transforme votre Beretta « Plat » en une multitude de prêt suppresseur. Le Silencerco Beretta 92F / 92FS / M9 fileté pistolet Canon ne nécessite pas un piston XL. Un piston normale ½"-28 tpi fournira la fonction fiable. Fileté 1/2"-28 d’accepter une grande variété de pistolet suppresseurs 1-10 » taux de rotation usiné de nitrure noir antireflets de 416R en acier inoxydable finition Beretta de Silencerco 92F / 92FS / M9 fileté pistolet Canon vient prête encastrées dans votre pistolet, et chacun est livré avec un protecteur de fil se prémunir contre les dommages aux filets lorsque vous filmez annulée.

279.9 CHF 0 CHF 279.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Barrel Length: 4.9'' Calibre: 9 mm Luger Finition: Noir Manufacture: Beretta Modèle: M9, 92F/FS Style: FiletÃ©

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Restrictions d'Achat

Permis d'acquisition d'arme requis

Caractéristiques

Barrel Length: 4.9'' Calibre: 9 mm Luger Finition: Noir Manufacture: Beretta Modèle: M9,92F/FS Style: FiletÃ© Poids du colis: 0.159kg Hauteur d'expédition: 48mm Largeur d'expédition: 46mm Longueur d'expédition: 203mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c

Sets You Up To Shoot Your Beretta With a Sound Suppressor

Plus...

Vous définit jusqu'à tirer votre Beretta avec un suppresseur sonore

Plus...

Évaluations client de SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.9

Great barrel. (07.08.2017)

Bad experience, possible lemon (21.09.2017)

Silencerco Beretta 92FS Barrel Fitment (22.12.2017)

Works with military surplus 92s model (17.02.2018)

Nice upgrade! (03.03.2018)

92s (21.05.2018)

Works nice (11.10.2018)

Lire 7 plus d'avis sur brownells.com

Poursuivre vos achats

MAGPUL AK-74 PMAG GEN M2 MOE MAGAZINE 5.45X39 30RD POLYMER BLACK
AK-74 30RD PMAG GEN M2 MOE MAGAZINE 5.45X39

MAGPUL

En stock

CHF 31.90 *

Chargeurs | Magazines

MAGPUL PMAG 30 AUS GEN M3 WINDOW, STEYR AUG
AUG PMAG 30 GEN M3 WINDOW

MAGPUL

En stock

CHF 41.90 *

Chargeurs | Magazines

3.5

MAGPUL AR .308 PMAG LR/SR GEN M3 WINDOW MAG 308 WIN 25RD BLK
AR .308 25RD PMAG LR/SR GEN M3 WINDOW MAGAZINE 308 WINCHESTER

MAGPUL

En stock

CHF 38.90 *

Chargeurs | Magazines

4.7

MAGPUL D-50 LR/SR GEN M3 PMAG 50 RDS 7.62X51/308 BLACK
D-50 LR/SR GEN 3 M3 PMAG

MAGPUL

En stock

CHF 229.90 *

Magazines

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile