Our Sinclair bi-pod adapters allow you to mount your Sinclair or Harris bi-pod to your accessory rail or Picatinny rail equipped forend. All aluminum and steel construction insures a lifetime of use.Both accessory rail models will fit Freeland and Anschutz style accessory rails. The Deluxe Model is specially designed to nest in the cradle of the Sinclair Bi-Pod and locks securely in position using two small cap screws, while the Standard Model slips in the accessory rail and is held in position by the tension created by tightening the bi-pod to the stock forend.Picatinny rail bi-pod adapter clamps securely in place using a steel socket screw and lets you install your bi-pod exactly where you want it on Picatinny rail equipped tactical rifles such as the AR-15.
Altro...
I nostri adattatori di bi-pod Sinclair consentono di montare il bi-pod Sinclair o Harris al ferroviario accessorio o Guida di Picatinny attrezzata castoro. Tutta la costruzione in alluminio e in acciaio assicura una durata di utilizzo. Entrambi i modelli ferroviario accessorio si adattano Freeland e Anschutz rotaie portaccessori di stile. Il modello Deluxe è appositamente progettato per nidificare nella culla dei Sinclair Bi-Pod e delle serrature saldamente in posizione tramite due piccole viti a brugola, mentre il modello Standard scivola nel rail accessorio e viene tenuto in posizione dalla tensione creato da bi-pod per l'astina stock di serraggio. Adattatore di Picatinny rail bi-pod bloccaggio stabile in posizione utilizzando una vite in acciaio e consente di installare il bi-pod esattamente dove si desidera che sulla guida Picatinny attrezzato tattici fucili come il AR-15.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL STANDARD BIPOD ACCESSORY RAIL ADAPTER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4
I would buy this product again.(13.09.2011)
It keeps the bipod very secure to the stock. Other adapters would not keep it as tight would shake.
Item fit well and looked great but....(23.09.2010)
I purchased this adapter recently and it fit great on my European style rifle but unfortunately its strength and durability is a major let down. I carry my rifle in a fitted Pelican 1750 case during transport and use as much care as possible when attaching the Sinclair tactical bi-pod and even with that being said, the stud stripped out of the nice aluminum base the 4th time I used it on the range. I will be contacting Sinclair tomorrow to hopefully remedy this issue and will report back shortly.
Best adapter for accessory rails(19.12.2013)
I disagree with the other reviewer. This rail is the best arrangement for some one with an accessory rail embedded in the fore end of their rifle. It will both widths of rails. Someone had some really savvy to come up with something that did that. I have installed many of these in customers rifles and never had one not fit or strip out. This is the sturdiest you will find in an adapter that must be mounted to a bipod stud.
N. prodotto: 749001388 SINCLAIR INTERNATIONAL STANDARD BIPOD ACCESSORY RAIL ADAPTER Parti Fabbricante: 048400 I nostri adattatori di bi-pod Sinclair consentono di montare il bi-pod Sinclair o Harris al ferroviario accessorio o Guida di Picatinny attrezzata castoro. Tutta la costruzione in alluminio e in acciaio assicura una durata di utilizzo. Entrambi i modelli ferroviario accessorio si adattano Freeland e Anschutz rotaie portaccessori di stile. Il modello Deluxe è appositamente progettato per nidificare nella culla dei Sinclair Bi-Pod e delle serrature saldamente in posizione tramite due piccole viti a brugola, mentre il modello Standard scivola nel rail accessorio e viene tenuto in posizione dalla tensione creato da bi-pod per l'astina stock di serraggio. Adattatore di Picatinny rail bi-pod bloccaggio stabile in posizione utilizzando una vite in acciaio e consente di installare il bi-pod esattamente dove si desidera che sulla guida Picatinny attrezzato tattici fucili come il AR-15.
16.9CHF0CHF 16.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Applicazione:
Swivel Stud Mount
Attachment:
Picatinny
Peso della spedizione: 0.023kgAltezza di spedizione: 1mmLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 749004371 SINCLAIR INTERNATIONAL DELUXE BIPOD ACCESSORY RAIL ADAPTER Parti Fabbricante: 048450 I nostri adattatori di bi-pod Sinclair consentono di montare il bi-pod Sinclair o Harris al ferroviario accessorio o Guida di Picatinny attrezzata castoro. Tutta la costruzione in alluminio e in acciaio assicura una durata di utilizzo. Entrambi i modelli ferroviario accessorio si adattano Freeland e Anschutz rotaie portaccessori di stile. Il modello Deluxe è appositamente progettato per nidificare nella culla dei Sinclair Bi-Pod e delle serrature saldamente in posizione tramite due piccole viti a brugola, mentre il modello Standard scivola nel rail accessorio e viene tenuto in posizione dalla tensione creato da bi-pod per l'astina stock di serraggio. Adattatore di Picatinny rail bi-pod bloccaggio stabile in posizione utilizzando una vite in acciaio e consente di installare il bi-pod esattamente dove si desidera che sulla guida Picatinny attrezzato tattici fucili come il AR-15.
42.9CHF0CHF 42.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 749011620 SINCLAIR INTERNATIONAL PICATINNY BIPOD ADAPTER I nostri adattatori di bi-pod Sinclair consentono di montare il bi-pod Sinclair o Harris al ferroviario accessorio o Guida di Picatinny attrezzata castoro. Tutta la costruzione in alluminio e in acciaio assicura una durata di utilizzo. Entrambi i modelli ferroviario accessorio si adattano Freeland e Anschutz rotaie portaccessori di stile. Il modello Deluxe è appositamente progettato per nidificare nella culla dei Sinclair Bi-Pod e delle serrature saldamente in posizione tramite due piccole viti a brugola, mentre il modello Standard scivola nel rail accessorio e viene tenuto in posizione dalla tensione creato da bi-pod per l'astina stock di serraggio. Adattatore di Picatinny rail bi-pod bloccaggio stabile in posizione utilizzando una vite in acciaio e consente di installare il bi-pod esattamente dove si desidera che sulla guida Picatinny attrezzato tattici fucili come il AR-15.
42.9CHF0CHF 42.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Our Sinclair bi-pod adapters allow you to mount your Sinclair or Harris bi-pod to your accessory rail or Picatinny rail equipped forend. All aluminum and steel construction insures a lifetime of use.Both accessory rail models will fit Freeland and Anschutz style accessory rails. The Deluxe Model is specially designed to nest in the cradle of the Sinclair Bi-Pod and locks securely in position using two small cap screws, while the Standard Model slips in the accessory rail and is held in position by the tension created by tightening the bi-pod to the stock forend.Picatinny rail bi-pod adapter clamps securely in place using a steel socket screw and lets you install your bi-pod exactly where you want it on Picatinny rail equipped tactical rifles such as the AR-15.
Altro...
I nostri adattatori di bi-pod Sinclair consentono di montare il bi-pod Sinclair o Harris al ferroviario accessorio o Guida di Picatinny attrezzata castoro. Tutta la costruzione in alluminio e in acciaio assicura una durata di utilizzo. Entrambi i modelli ferroviario accessorio si adattano Freeland e Anschutz rotaie portaccessori di stile. Il modello Deluxe è appositamente progettato per nidificare nella culla dei Sinclair Bi-Pod e delle serrature saldamente in posizione tramite due piccole viti a brugola, mentre il modello Standard scivola nel rail accessorio e viene tenuto in posizione dalla tensione creato da bi-pod per l'astina stock di serraggio. Adattatore di Picatinny rail bi-pod bloccaggio stabile in posizione utilizzando una vite in acciaio e consente di installare il bi-pod esattamente dove si desidera che sulla guida Picatinny attrezzato tattici fucili come il AR-15.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL STANDARD BIPOD ACCESSORY RAIL ADAPTER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4
I would buy this product again.(13.09.2011)
It keeps the bipod very secure to the stock. Other adapters would not keep it as tight would shake.
Item fit well and looked great but....(23.09.2010)
I purchased this adapter recently and it fit great on my European style rifle but unfortunately its strength and durability is a major let down. I carry my rifle in a fitted Pelican 1750 case during transport and use as much care as possible when attaching the Sinclair tactical bi-pod and even with that being said, the stud stripped out of the nice aluminum base the 4th time I used it on the range. I will be contacting Sinclair tomorrow to hopefully remedy this issue and will report back shortly.
Best adapter for accessory rails(19.12.2013)
I disagree with the other reviewer. This rail is the best arrangement for some one with an accessory rail embedded in the fore end of their rifle. It will both widths of rails. Someone had some really savvy to come up with something that did that. I have installed many of these in customers rifles and never had one not fit or strip out. This is the sturdiest you will find in an adapter that must be mounted to a bipod stud.