Won't Scratch Or Damage Your Bore; Fits Most Popluar Rods
Solid brass loops are ideal to hold a patch for cleaning the bore on your firearm without worrying about scratches that can reduce accuracy. Male threads fit most popular rods and adapters.
SPECS: Brass. .17-.22 has 5-40 threads; .22-.30 available with 8-32 or 8-36 threads; .30-.38; .38-.45 have 8-32 threads; .50/shotgun available with 8-32, 10-32 & 5⁄16-27 threads.
Altro...
Non graffiare o danneggiare il vostro foro; Si inserisce la maggior parte delle canne ben conosciuto fra
Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
Specifiche: ottone..17,22 ha 5-40 fili;,22-30 disponibili con filettatura 8-32 o 8-36; 30-38; 38-45 hanno discussioni 8-32;,50 / fucile disponibile con 8-32, 10-32 & 5 ⁄ 16-27 thread.
Altro...
Punteggi dei clienti per BROWNELLS BRASS LOOP 17-22 CALIBER 5-40M
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.2
Beats the pants off a plastic tip(16.05.2014)
This is a well made tip. I had just one complaint. It wasnt threaded far enough up the shank to allow it to seat fully. I remedied this by forcing it, with lubrication into a steel cleaning rod, and backing it out several times, effectively threading the shank. It wasnt much oversize and worked well. Maybe not all of them will have this problem. It didnt take but 5 minutes and was worth the effort to have a high quality brass tip that will last a lifetime of cleaning. If you're an average shooter, and dont want to be to modify your gear, then you'll probably be happy with a plastic tip anyway.
Same as below(09.10.2014)
I bought another one of these, and it had the same problem as described below. Still very good quality and worth a quick fix in my opinion.
Quality construction (07.09.2017)
Quality construction and good threading
Quality construction(07.09.2017)
Quality construction and good threading
Excellent quality(10.09.2017)
Well made piece of gear for multiple caliber weapons.
Shank is very short(13.07.2017)
Bought this to clean a .177 air rifle. The threaded shank is only 1/8" - 3/16" long. When used with my Outer's cleaning rod I can get maybe 1 or 2 threads to actually engage. I did not try to use it for fear it would simply snap off in the end of the rod. The shank should be at least twice as long.
N. prodotto: 084000214 BROWNELLS BRASS LOOP 17-22 CALIBER 5-40M050806110328 Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
N. prodotto: 084000215 BROWNELLS BRASS LOOP 22-30 CALIBER 8-32M Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
9.9CHF43CHF 9.90
*
Disponibile
Caratteristiche:Calibro: 22 Calibro (.223-.224), 243/6 mm (.243), 264/6.5 mm (.264), 284/7 mm (.284), 30 Calibro (.308), 270/6.8 mm (.277)
N. prodotto: 084000217 BROWNELLS BRASS LOOP 38-45 CALIBER 8-32M Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
N. prodotto: 084000219 BROWNELLS BRASS LOOP SHOTGUN/50 CALIBER 10-32M Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
N. prodotto: 084000220 BROWNELLS BRASS LOOP SHOTGUN/50 CALIBER 5/16 -27M Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
N. prodotto: 084000259 BROWNELLS 22-30 CALIBER 8-36M BRASS LOOP Parti Fabbricante: IP1100076P Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
12.9CHF393CHF 12.90
*
Disponibile
Caratteristiche:Calibro: 22 Calibro (.223-.224), 243/6 mm (.243), 264/6.5 mm (.264), 284/7 mm (.284), 30 Calibro (.308), 270/6.8 mm (.277)
N. prodotto: 084000216 BROWNELLS BRASS LOOP 30-38 CALIBER 8-32M Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
Won't Scratch Or Damage Your Bore; Fits Most Popluar Rods
Solid brass loops are ideal to hold a patch for cleaning the bore on your firearm without worrying about scratches that can reduce accuracy. Male threads fit most popular rods and adapters.
SPECS: Brass. .17-.22 has 5-40 threads; .22-.30 available with 8-32 or 8-36 threads; .30-.38; .38-.45 have 8-32 threads; .50/shotgun available with 8-32, 10-32 & 5⁄16-27 threads.
Altro...
Non graffiare o danneggiare il vostro foro; Si inserisce la maggior parte delle canne ben conosciuto fra
Anelli in ottone massiccio sono ideali per contenere una patch per la pulizia del foro sulla vostra arma da fuoco senza preoccuparsi di graffi che possono ridurre la precisione. Filettature maschio in forma più popolare di canne ed adattatori.
Specifiche: ottone..17,22 ha 5-40 fili;,22-30 disponibili con filettatura 8-32 o 8-36; 30-38; 38-45 hanno discussioni 8-32;,50 / fucile disponibile con 8-32, 10-32 & 5 ⁄ 16-27 thread.
Altro...
Punteggi dei clienti per BROWNELLS BRASS LOOP 17-22 CALIBER 5-40M
Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.2
Beats the pants off a plastic tip(16.05.2014)
This is a well made tip. I had just one complaint. It wasnt threaded far enough up the shank to allow it to seat fully. I remedied this by forcing it, with lubrication into a steel cleaning rod, and backing it out several times, effectively threading the shank. It wasnt much oversize and worked well. Maybe not all of them will have this problem. It didnt take but 5 minutes and was worth the effort to have a high quality brass tip that will last a lifetime of cleaning. If you're an average shooter, and dont want to be to modify your gear, then you'll probably be happy with a plastic tip anyway.
Same as below(09.10.2014)
I bought another one of these, and it had the same problem as described below. Still very good quality and worth a quick fix in my opinion.
Quality construction (07.09.2017)
Quality construction and good threading
Quality construction(07.09.2017)
Quality construction and good threading
Excellent quality(10.09.2017)
Well made piece of gear for multiple caliber weapons.
Shank is very short(13.07.2017)
Bought this to clean a .177 air rifle. The threaded shank is only 1/8" - 3/16" long. When used with my Outer's cleaning rod I can get maybe 1 or 2 threads to actually engage. I did not try to use it for fear it would simply snap off in the end of the rod. The shank should be at least twice as long.