Compact, Slimline Design Won't Snag On Brush Or Clothing
Steel sling adapter features a unique slot/hole configuration that keeps the plate as slim and compact as possible to help eliminate snags on brush and your BDUs when carrying rifles with collapsible stocks. Accepts both 1¼" wide webbing and single-point clip-on tactical slings. Move the sling from one side of the receiver to the other or swap it for a different one in seconds. Provides plenty of clearance for forward assist and easy access for clearing jams. Replaces factory receiver plate without gunsmithing.
SPECS: Steel, black oxide finish. Fits CAR-15/M4 and collapsible-stocked AR-15 rifles. 2" (5.2cm) long, 1-13⁄16" (4.6cm) wide, 1⁄8" thick.
Mehr...
Kompaktes, schlankes Design, das weder am Pinsel noch an der Kleidung hängen bleibt
Der Stahlgurtadapter verfügt über eine einzigartige Schlitz- / Lochkonfiguration, die die Platte so schlank und kompakt wie möglich hält, um beim Tragen von Gewehren mit zusammenklappbaren Schäften ein Verklemmen der Bürste und Ihrer BDUs zu vermeiden. Nimmt sowohl 1¼ "breite Gurtbänder als auch taktische Einpunkt-Hebebänder auf. Bewegen Sie die Hebebänder von einer Seite des Empfängers zur anderen oder tauschen Sie sie innerhalb von Sekunden gegen eine andere. Bietet viel Freiraum für die Vorwärtshilfe und einfachen Zugang zum Räumen Staus. Ersetzt die werkseitige Empfängerplatte ohne Waffenschmiedekunst.
Kundenbewertungen zu BROWNELLS LOW-PROFILE SLING ADAPTER
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 3.2
easy to install but damaged easily(15.10.2009)
Easy to install but after just a few hours of work with a single point sling it was bent where the sling attached and the sling began to catch. For me to make it work correctly would have to use some sort of adapter.
I will buy this product again and again(19.10.2009)
Simple to install, took about 10 minutes. Remember to watch the springs and plungers!
Works well.(09.11.2009)
Not the most attractive piece, but works well. Holds tight in gun, and works great with Blackhawk Storm Sling. Nice if multiple users using one weapon so as to switch sling to either side of choice on the gun.
Nice, but has a hitch...(24.12.2009)
It was easy to install, and works with most of my slings (Specter MOUT, Magpul MS2, Spec-Ops Sling 101, etc.), but it interferes with my right thumb's operation of the selector switch. I'll be getting another mount soon
Not Bad Not Bad At All(07.03.2010)
I use it with my troy ind. single point cqb sling and dont baby it...its works great,and is durable,and strong. complete faith in it...But does rub my finger when i hit the saftey but i wear gloves so its fine...
not my favorite(02.01.2011)
This plate is not sturdy enough to stand up to hard use. A single point sling hooked into the hole will put enough torque on the webbing slot to bend it out of shape. Once bent, a sling hook can ride up in the slot and stick, which is not what you want a single point sling to do.
The plate also projects out from the receiver such that I always seem to bang into it and scrape my hand.
Artikel-Nr.: 080000381 BROWNELLS LOW-PROFILE SLING ADAPTER050806107786 Der Stahlgurtadapter verfügt über eine einzigartige Schlitz- / Lochkonfiguration, die die Platte so schlank und kompakt wie möglich hält, um beim Tragen von Gewehren mit zusammenklappbaren Schäften ein Verklemmen der Bürste und Ihrer BDUs zu vermeiden. Nimmt sowohl 1¼ "breite Gurtbänder als auch taktische Einpunkt-Hebebänder auf. Bewegen Sie die Hebebänder von einer Seite des Empfängers zur anderen oder tauschen Sie sie innerhalb von Sekunden gegen eine andere. Bietet viel Freiraum für die Vorwärtshilfe und einfachen Zugang zum Räumen Staus. Ersetzt die werkseitige Empfängerplatte ohne Waffenschmiedekunst.
15.9CHF7CHF 15.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Art: Rifle Sling AdapterFarbe: Black
Compact, Slimline Design Won't Snag On Brush Or Clothing
Steel sling adapter features a unique slot/hole configuration that keeps the plate as slim and compact as possible to help eliminate snags on brush and your BDUs when carrying rifles with collapsible stocks. Accepts both 1¼" wide webbing and single-point clip-on tactical slings. Move the sling from one side of the receiver to the other or swap it for a different one in seconds. Provides plenty of clearance for forward assist and easy access for clearing jams. Replaces factory receiver plate without gunsmithing.
SPECS: Steel, black oxide finish. Fits CAR-15/M4 and collapsible-stocked AR-15 rifles. 2" (5.2cm) long, 1-13⁄16" (4.6cm) wide, 1⁄8" thick.
Mehr...
Kompaktes, schlankes Design, das weder am Pinsel noch an der Kleidung hängen bleibt
Der Stahlgurtadapter verfügt über eine einzigartige Schlitz- / Lochkonfiguration, die die Platte so schlank und kompakt wie möglich hält, um beim Tragen von Gewehren mit zusammenklappbaren Schäften ein Verklemmen der Bürste und Ihrer BDUs zu vermeiden. Nimmt sowohl 1¼ "breite Gurtbänder als auch taktische Einpunkt-Hebebänder auf. Bewegen Sie die Hebebänder von einer Seite des Empfängers zur anderen oder tauschen Sie sie innerhalb von Sekunden gegen eine andere. Bietet viel Freiraum für die Vorwärtshilfe und einfachen Zugang zum Räumen Staus. Ersetzt die werkseitige Empfängerplatte ohne Waffenschmiedekunst.
Kundenbewertungen zu BROWNELLS LOW-PROFILE SLING ADAPTER
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 3.2
easy to install but damaged easily(15.10.2009)
Easy to install but after just a few hours of work with a single point sling it was bent where the sling attached and the sling began to catch. For me to make it work correctly would have to use some sort of adapter.
I will buy this product again and again(19.10.2009)
Simple to install, took about 10 minutes. Remember to watch the springs and plungers!
Works well.(09.11.2009)
Not the most attractive piece, but works well. Holds tight in gun, and works great with Blackhawk Storm Sling. Nice if multiple users using one weapon so as to switch sling to either side of choice on the gun.
Nice, but has a hitch...(24.12.2009)
It was easy to install, and works with most of my slings (Specter MOUT, Magpul MS2, Spec-Ops Sling 101, etc.), but it interferes with my right thumb's operation of the selector switch. I'll be getting another mount soon
Not Bad Not Bad At All(07.03.2010)
I use it with my troy ind. single point cqb sling and dont baby it...its works great,and is durable,and strong. complete faith in it...But does rub my finger when i hit the saftey but i wear gloves so its fine...
not my favorite(02.01.2011)
This plate is not sturdy enough to stand up to hard use. A single point sling hooked into the hole will put enough torque on the webbing slot to bend it out of shape. Once bent, a sling hook can ride up in the slot and stick, which is not what you want a single point sling to do.
The plate also projects out from the receiver such that I always seem to bang into it and scrape my hand.