Compact, Slimline Design Won't Snag On Brush Or Clothing
Steel sling adapter features a unique slot/hole configuration that keeps the plate as slim and compact as possible to help eliminate snags on brush and your BDUs when carrying rifles with collapsible stocks. Accepts both 1¼" wide webbing and single-point clip-on tactical slings. Move the sling from one side of the receiver to the other or swap it for a different one in seconds. Provides plenty of clearance for forward assist and easy access for clearing jams. Replaces factory receiver plate without gunsmithing.
SPECS: Steel, black oxide finish. Fits CAR-15/M4 and collapsible-stocked AR-15 rifles. 2" (5.2cm) long, 1-13⁄16" (4.6cm) wide, 1⁄8" thick.
Plus...
Compact, Design mince ne s'accrocher dans les buissons ou les vêtements
Acier à bandoulière caractéristiques adaptateur une configuration unique slot/trou qui maintient la plaque comme mince et compact que possible pour aider à éliminer les chicots sur la brosse et vos EDR lorsque vous transportez des fusils avec des stocks de développement/réduction. Accepte les deux 1¼" large sangle et monopoint élingues tactiques clip-on. Passer la sangle d'un côté du récepteur à l'autre ou échanger pour un autre en quelques secondes. Offre beaucoup d'espace libre pour aider vers l'avant et un accès facile pour les confitures. Remplace la plaque réceptrice usine sans armurerie.
Spécifications : acier, finition d'oxyde noir. Correspond à la voiture-15/M4 et regorgeant de développement/réduction des fusils AR-15. 2"(5,2 cm) long, 1-13 ⁄ 16" (4,6 cm) de large, 1 ⁄ 8" d'épaisseur.
Plus...
Évaluations client de BROWNELLS LOW-PROFILE SLING ADAPTER
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 3.2
easy to install but damaged easily(15.10.2009)
Easy to install but after just a few hours of work with a single point sling it was bent where the sling attached and the sling began to catch. For me to make it work correctly would have to use some sort of adapter.
I will buy this product again and again(19.10.2009)
Simple to install, took about 10 minutes. Remember to watch the springs and plungers!
Works well.(09.11.2009)
Not the most attractive piece, but works well. Holds tight in gun, and works great with Blackhawk Storm Sling. Nice if multiple users using one weapon so as to switch sling to either side of choice on the gun.
Nice, but has a hitch...(24.12.2009)
It was easy to install, and works with most of my slings (Specter MOUT, Magpul MS2, Spec-Ops Sling 101, etc.), but it interferes with my right thumb's operation of the selector switch. I'll be getting another mount soon
Not Bad Not Bad At All(07.03.2010)
I use it with my troy ind. single point cqb sling and dont baby it...its works great,and is durable,and strong. complete faith in it...But does rub my finger when i hit the saftey but i wear gloves so its fine...
not my favorite(02.01.2011)
This plate is not sturdy enough to stand up to hard use. A single point sling hooked into the hole will put enough torque on the webbing slot to bend it out of shape. Once bent, a sling hook can ride up in the slot and stick, which is not what you want a single point sling to do.
The plate also projects out from the receiver such that I always seem to bang into it and scrape my hand.
Référence: 080000381 BROWNELLS LOW-PROFILE SLING ADAPTER050806107786 Acier à bandoulière caractéristiques adaptateur une configuration unique slot/trou qui maintient la plaque comme mince et compact que possible pour aider à éliminer les chicots sur la brosse et vos EDR lorsque vous transportez des fusils avec des stocks de développement/réduction. Accepte les deux 1¼" large sangle et monopoint élingues tactiques clip-on. Passer la sangle d'un côté du récepteur à l'autre ou échanger pour un autre en quelques secondes. Offre beaucoup d'espace libre pour aider vers l'avant et un accès facile pour les confitures. Remplace la plaque réceptrice usine sans armurerie.
Compact, Slimline Design Won't Snag On Brush Or Clothing
Steel sling adapter features a unique slot/hole configuration that keeps the plate as slim and compact as possible to help eliminate snags on brush and your BDUs when carrying rifles with collapsible stocks. Accepts both 1¼" wide webbing and single-point clip-on tactical slings. Move the sling from one side of the receiver to the other or swap it for a different one in seconds. Provides plenty of clearance for forward assist and easy access for clearing jams. Replaces factory receiver plate without gunsmithing.
SPECS: Steel, black oxide finish. Fits CAR-15/M4 and collapsible-stocked AR-15 rifles. 2" (5.2cm) long, 1-13⁄16" (4.6cm) wide, 1⁄8" thick.
Plus...
Compact, Design mince ne s'accrocher dans les buissons ou les vêtements
Acier à bandoulière caractéristiques adaptateur une configuration unique slot/trou qui maintient la plaque comme mince et compact que possible pour aider à éliminer les chicots sur la brosse et vos EDR lorsque vous transportez des fusils avec des stocks de développement/réduction. Accepte les deux 1¼" large sangle et monopoint élingues tactiques clip-on. Passer la sangle d'un côté du récepteur à l'autre ou échanger pour un autre en quelques secondes. Offre beaucoup d'espace libre pour aider vers l'avant et un accès facile pour les confitures. Remplace la plaque réceptrice usine sans armurerie.
Spécifications : acier, finition d'oxyde noir. Correspond à la voiture-15/M4 et regorgeant de développement/réduction des fusils AR-15. 2"(5,2 cm) long, 1-13 ⁄ 16" (4,6 cm) de large, 1 ⁄ 8" d'épaisseur.
Plus...
Évaluations client de BROWNELLS LOW-PROFILE SLING ADAPTER
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 3.2
easy to install but damaged easily(15.10.2009)
Easy to install but after just a few hours of work with a single point sling it was bent where the sling attached and the sling began to catch. For me to make it work correctly would have to use some sort of adapter.
I will buy this product again and again(19.10.2009)
Simple to install, took about 10 minutes. Remember to watch the springs and plungers!
Works well.(09.11.2009)
Not the most attractive piece, but works well. Holds tight in gun, and works great with Blackhawk Storm Sling. Nice if multiple users using one weapon so as to switch sling to either side of choice on the gun.
Nice, but has a hitch...(24.12.2009)
It was easy to install, and works with most of my slings (Specter MOUT, Magpul MS2, Spec-Ops Sling 101, etc.), but it interferes with my right thumb's operation of the selector switch. I'll be getting another mount soon
Not Bad Not Bad At All(07.03.2010)
I use it with my troy ind. single point cqb sling and dont baby it...its works great,and is durable,and strong. complete faith in it...But does rub my finger when i hit the saftey but i wear gloves so its fine...
not my favorite(02.01.2011)
This plate is not sturdy enough to stand up to hard use. A single point sling hooked into the hole will put enough torque on the webbing slot to bend it out of shape. Once bent, a sling hook can ride up in the slot and stick, which is not what you want a single point sling to do.
The plate also projects out from the receiver such that I always seem to bang into it and scrape my hand.