This handy three-in-one fixture helps you chamber rifle or pistol barrels, including contoured barrels, regardless of length, from the chuck side of your lathe. Also use it to true up any bolt or bolt face, and to true up Remington actions. Fits a four-jaw independent chuck; may be modified for use in three- or six-jaw chuck. Machined aluminum tube with hardened steel setscrews that are brass tipped to prevent marring the work piece. Built-in safety feature prevents setscrews from sticking out beyond the fixture and catching on your clothes.
SPECS: Machined aluminum, matte black finish. Steel setscrews. 7" long, 4" O.D., with a 1½" dia. through hole. Slot size is 4-1/2" x 1.
Altro...
Questo pratico dispositivo di tre-in-one consente di sezione fucile o pistola botti, tra cui botti sagomati, indipendentemente dalla lunghezza, dal lato del vostro Tornio mandrino. Anche di usarlo su true qualsiasi vite o bullone viso e su true le azioni Remington. Si inserisce un mandrino di quattro griffe indipendente; può essere modificato per utilizzo a tre o sei autocentrante. Lavorati con tubo di alluminio con viti in acciaio temprate che sono in ottone con punta per evitare di guastare il pezzo da lavorare. Funzionalità di sicurezza integrate previene le viti di fissaggio da sporge oltre l'apparecchio e cattura sui vostri vestiti.
Specifiche: lavorati in alluminio, finitura nero opaco. Viti di fissaggio in acciaio. 7" a lungo, 4" od, con 1½" diametro foro passante. Formato della scanalatura è 4-1/2 "x 1.
Altro...
Punteggi dei clienti per VIPER BENCH REST CHAMBERING & TRUING FIXTURE
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
Not worth the dough(15.06.2015)
Works great with receivers but a pain to get a bolt running true. I would of rather saved the money and used the three separate tools I already have. Had two of the brass inserts fall off when I was releasing the first job. Could of completely finished the job on the receiver ,bolt and barrel in the time it took me to get the bolt running true with this tool. Maybe just need to mess with it more if I can find the time, Would also be very easy to make.
Time consuming setup(12.06.2016)
Very time consuming setting up fixture not very user frendly.
I would not recomend this item. I agree with other review may need to use it more to get better at dialing in
N. prodotto: 100015759 VIPER BENCH REST CHAMBERING & TRUING FIXTURE Parti Fabbricante: CFBTF Questo pratico dispositivo di tre-in-one consente di sezione fucile o pistola botti, tra cui botti sagomati, indipendentemente dalla lunghezza, dal lato del vostro Tornio mandrino. Anche di usarlo su true qualsiasi vite o bullone viso e su true le azioni Remington. Si inserisce un mandrino di quattro griffe indipendente; può essere modificato per utilizzo a tre o sei autocentrante. Lavorati con tubo di alluminio con viti in acciaio temprate che sono in ottone con punta per evitare di guastare il pezzo da lavorare. Funzionalità di sicurezza integrate previene le viti di fissaggio da sporge oltre l'apparecchio e cattura sui vostri vestiti.
449.9CHF1CHF 449.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Remington
Modello:
700
Peso della spedizione: 3.198kgAltezza di spedizione: 168mmLarghezza di spedizione: 165mmLunghezza di spedizione: 323mm
This handy three-in-one fixture helps you chamber rifle or pistol barrels, including contoured barrels, regardless of length, from the chuck side of your lathe. Also use it to true up any bolt or bolt face, and to true up Remington actions. Fits a four-jaw independent chuck; may be modified for use in three- or six-jaw chuck. Machined aluminum tube with hardened steel setscrews that are brass tipped to prevent marring the work piece. Built-in safety feature prevents setscrews from sticking out beyond the fixture and catching on your clothes.
SPECS: Machined aluminum, matte black finish. Steel setscrews. 7" long, 4" O.D., with a 1½" dia. through hole. Slot size is 4-1/2" x 1.
Altro...
Questo pratico dispositivo di tre-in-one consente di sezione fucile o pistola botti, tra cui botti sagomati, indipendentemente dalla lunghezza, dal lato del vostro Tornio mandrino. Anche di usarlo su true qualsiasi vite o bullone viso e su true le azioni Remington. Si inserisce un mandrino di quattro griffe indipendente; può essere modificato per utilizzo a tre o sei autocentrante. Lavorati con tubo di alluminio con viti in acciaio temprate che sono in ottone con punta per evitare di guastare il pezzo da lavorare. Funzionalità di sicurezza integrate previene le viti di fissaggio da sporge oltre l'apparecchio e cattura sui vostri vestiti.
Specifiche: lavorati in alluminio, finitura nero opaco. Viti di fissaggio in acciaio. 7" a lungo, 4" od, con 1½" diametro foro passante. Formato della scanalatura è 4-1/2 "x 1.
Altro...
Punteggi dei clienti per VIPER BENCH REST CHAMBERING & TRUING FIXTURE
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
Not worth the dough(15.06.2015)
Works great with receivers but a pain to get a bolt running true. I would of rather saved the money and used the three separate tools I already have. Had two of the brass inserts fall off when I was releasing the first job. Could of completely finished the job on the receiver ,bolt and barrel in the time it took me to get the bolt running true with this tool. Maybe just need to mess with it more if I can find the time, Would also be very easy to make.
Time consuming setup(12.06.2016)
Very time consuming setting up fixture not very user frendly.
I would not recomend this item. I agree with other review may need to use it more to get better at dialing in