Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Améliore ton tir avec le montage Trijicon RMR pour CZ SHADOW 2!
Ce montage de la marque EGW est conçu pour s'adapter parfaitement à ton CZ SHADOW 2 tout en te permettant d'installer une visée red dot Trijicon RMR ou Holosun HS507C.
Détails du produit :
- Matériau : Aluminium 7075
- Revêtement : Matte Black Hardcoat
- Longueur totale : 1.780"
- Largeur totale : 1.1"
- Matériel de montage : (2) Vis à tête plate 6-32, (1) Vis de réglage 6-32 X 3/16
Compatibilité :
Ce montage convient à :
- Baby Desert Eagle (post 2006)
- EAA Witness Elite Match
Ce montage ne convient pas à : Rock Island 1911s
Installation :
Pour installer ton Trijicon RMR, il te suffit de :
- Retirer la hausse arrière de ton arme
- Installer le montage EGW dans le rail
- Serrer la vis de réglage (si applicable)
- Placer la visée red dot sur le montage EGW (en plaçant un petit morceau de papier entre la visée red dot et le montage, tu faciliteras le retrait et empêchera le Loctite de toucher ta visée red dot)
- Appliquer du Loctite bleu sur les vis de montage fournies
- Couple les vis de montage à 15 in/lbs
Remarque : Les vis fournies nécessitent une clé Allen de 5/64'' pour l'installation.