Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
080621246
60\ Shoulder x .245"
We ve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we ve had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. CAUTION: For use in milling machine only. Solid carbide 2" (5cm) long. 1⁄4" (6.3cm) diameter shank. 60° shoulder.
74.9 74.9 1 CHF
N. prodotto: 080621246
BROWNELLS CARBIDE SIGHT INSERT CUTTER Abbiamo avuto molte richieste per una fresa a coda di rondine piccolo che accelererebbe il taglio delle code di rondine di fronte lame vista durante l'installazione di colore inserti. Quella che aveva fatto ve taglia un 1 ⁄ 4 "ampia a coda di rondine, inserisce giusto per vista, e il prodotto finito è molto preciso. Poiché la fresa è piccola, (si rastrema ad un diametro di. 110"), è necessario effettuare un taglio iniziale con un 1/8" mulino di fine (elencato qui sotto). Utilizzando il laminatoio di estremità per rimuovere alcuni metallo prima, potrai evitare sovraccarichi il cutter e romperla. Attenzione: per l'uso in fresatrice solo. Carburo solido 2"(5cm) lungo. 1 ⁄ 4 "gambo di diametro (6,3 cm). spalla di 60°.
74.9 CHF 87 CHF 74.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Gradi: 60

Caratteristiche

Gradi: 60 Peso della spedizione: 0.032kg Altezza di spedizione: 5mm Larghezza di spedizione: 84mm Lunghezza di spedizione: 168mm

Dettagli dell'elemento

Made in Usa



60\ Shoulder x .245"
We ve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we ve had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. CAUTION: For use in milling machine only. Solid carbide 2" (5cm) long. 1⁄4" (6.3cm) diameter shank. 60° shoulder.
Newsletter