The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length. The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5"" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense MFR 13.5", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding Made in the USA! SPECIFICATIONS: Mounting System - M-LOK Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 14.5" Barrel Profile - Lightweight Product Weight - 5.9 Length - 31 1/2” – 34 ¾” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
Fucile semiautomatico DDM4 V7 SLW: leggerezza e prestazioni superiori
Il fucile DDM4 V7 SLW in stile AR15 è uno dei fucili più leggeri e maneggevoli disponibili nella gamma DDM4, pesando meno di 6 libbre. Costruito attorno a un Cold Hammer Forged di 14,5 pollici, il profilo leggero della canna, il V7 SLW è dotato di un Extended Flash Suppressor che è fissato e saldato per raggiungere la lunghezza minima della canna di 16 pollici richiesta dalla NFA.
Il sistema di gas a lunghezza media offre un ciclo fluido e affidabile in qualsiasi condizione, riducendo sia il rinculo percepito che l'usura delle parti in movimento. Un handguard MFR 13.5 M-LOK flottante offre incredibili risparmi di peso, oltre a un raffreddamento, ergonomia e modularità superiori, mantenendo la forza e la durata attese da Daniel Defense.
Con i punti di attacco M-LOK che si estendono su 7 posizioni e un rail Picatinny 1913 ininterrotto sulla parte superiore, il V7 SLW ha ampio spazio per i mirini, ottiche e accessori necessari all'operatore. L'indipendente ambi GRIP-N-RIP Charging Handle si adatta a tiratori mancini e destrorsi. Questo fucile è inoltre dotato di un buttstock ergonomico e di una pistol grip Daniel Defense.
Caratteristiche:
- LOWER RECEIVER: Mil-Spec con Enhanced Flared Magazine Well e punto di attacco QD Swivel sul retro. CNC Machined di 7075-T6 Aluminum
- UPPER RECEIVER: Mil-Spec con segni di indicizzazione e M4 Feed Ramps. CNC Machined di 7075-T6 Aluminum
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, e HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined di 4140 Hardened Steel e Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Venduti separatamente
- HANDGUARD: Daniel Defense MFR 13.5", CNC Machined di 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined di 7075-T6 Aluminum, Handles & Latch CNC Machined di 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer con Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer con Soft Touch Overmolding
Prodotto realizzato negli USA!
Specifiche:
- Mounting System: M-LOK
- Caliber: 5.56mm NATO
- Muzzle Thread: 1 ⁄ 2 × 28 TPI (Threads Per Inch)
- Gas System: Mid-length
- Barrel Length: 14.5"
- Barrel Profile: Lightweight
- Product Weight: 5.9
- Length: 31 1/2” – 34 ¾”
- Magazine: DD Magazine con capacità di 32 colpi nella stessa dimensione delle riviste standard da 30 colpi
- Case: Daniel Defense Full-Latch Impact Plastic Case
Aiuto e contatti
Newsletter
Visualizzazione classica
Visualizzazione mobile