The DDM4 V9 AR15 style rifle is designed to satisfy the needs of modern shooters, not only in popular shooting sports, but also for tactical and defensive applications. The long, 15 inch picatinny quad rail over a 16 inch Cold Hammer Forged barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets. This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick but precise rapid fire. The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F. Made in the USA! SPECIFICATIONS: Mounting System - Picatinny Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 16" Barrel Profile - Government Product Weight - 6.59 lbs Length - 32 1/4" – 35 7/8” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
Die DDM4 V9 – Dein zuverlässiger Begleiter für Präzision und Leistung!
Die DDM4 V9 AR15-Stilgewehr ist perfekt für moderne Schützen, egal ob im beliebten Schiesssport oder für taktische und defensive Anwendungen. Mit einem langen 15 Zoll Picatinny Quad Rail über einem 16 Zoll Cold Hammer Forged Lauf hast du die Möglichkeit, deine Unterstützungshand nahe am Mündungsende zu positionieren, was dir hilft, das Gewehr präziser zu führen und Überbewegungen beim Wechsel zwischen mehreren Zielen zu vermeiden.
Hauptmerkmale:
- LOWER RECEIVER: Mil-Spec mit verbessertem, verbreitertem Magazinwell und QD Swivel-Anschlussstelle. CNC-gefräst aus 7075-T6 Aluminium, Typ III Hartbeschichtet.
- UPPER RECEIVER: Mil-Spec mit Indexierungsmarkierungen und M4-Futterrampen. CNC-gefräst aus 7075-T6 Aluminium, Typ III Hartbeschichtet.
- BARREL: Chrome Moly Vanadium Stahl, Cold Hammer Forged, 1:7 Twist, 16" Government-Profil, verchromt, Mil-Spec schwer phosphatiert und HP/MPI getestet.
- GAS SYSTEM: Geklemmter Low Profile Gas Block, CNC-gefräst aus 4140 gehärtetem Stahl und Mil-Spec schwer phosphatiert, Mid-length, Direct Impingement.
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Edelstahl, Salzbad-Nitrid-Finish.
- BOLT CARRIER GROUP: M16-Profil, Mil-Spec MP getestet, verchromt, korrekt gestifteter Gas Key.
- BUFFER: H Buffer.
- SIGHTS: Separat erhältlich.
- HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC-gefräst aus 6061-T6 Aluminium, Typ III Hartbeschichtet.
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Körper CNC-gefräst aus 7075-T6 Aluminium, Griffe & Latch CNC-gefräst aus 6061-T6 Aluminium, schwere Edelstahl-Rollstifte, Typ III Hartbeschichtet.
- RECEIVER EXTENSION: 6-Positionen Mil-Spec 7075-T6 Aluminium.
- BUTTSTOCK: Daniel Defense Buttstock, glasgefüllter Polymer mit Soft Touch Überzug.
- PISTOL GRIP: Daniel Defense Pistol Grip, glasgefüllter Polymer mit Soft Touch Überzug.
- GRIP: Daniel Defense Vertical Grip, glasgefüllter Polymer mit Soft Touch Überzug.
- RAIL PANELS: Daniel Defense Rail Panels aus Santoprene, hitzebeständig bis 300° F.
Hergestellt in den USA!
Technische Spezifikationen:
- Montagesystem: Picatinny
- Kaliber: 5.56mm NATO
- Mündungsgewinde: 1 ⁄ 2 × 28 TPI (Threads Per Inch)
- Gas System: Mid-length
- Lauflänge: 16"
- Laufprofil: Government
- Produktgewicht: 6.59 lbs
- Gesamtlänge: 32 1/4" – 35 7/8”
- Magazin: DD Magazin mit 32-Schuss Kapazität im gleichen Format wie die branchenüblichen 30-Schuss Magazine
- Transportkoffer: Daniel Defense Full-Latch Impact Plastic Case
Hilfe und Kontakt
Newsletter
Klassische Ansicht
Mobile Ansicht