The DDM4 V9 AR15 style rifle is designed to satisfy the needs of modern shooters, not only in popular shooting sports, but also for tactical and defensive applications. The long, 15 inch picatinny quad rail over a 16 inch Cold Hammer Forged barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets. This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick but precise rapid fire. The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F. Made in the USA! SPECIFICATIONS: Mounting System - Picatinny Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 16" Barrel Profile - Government Product Weight - 6.59 lbs Length - 32 1/4" – 35 7/8” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
Fucile DDM4 V9: l'arma ideale per tiratori moderni
Il fucile DDM4 V9 in stile AR15 è progettato per soddisfare le esigenze dei tiratori moderni, sia negli sport di tiro popolari che per applicazioni tattiche e difensive. Con un lungo quad rail picatinny da 15 pollici sopra un canna Cold Hammer Forged da 16 pollici, l'operatore ha la possibilità di estendere la mano di supporto vicino alla volata, permettendo di guidare l'arma con maggiore precisione e prevenendo il sovratravel durante le transizioni tra più bersagli.
Caratteristiche principali:
- LOWER RECEIVER: Mil-Spec con Enhanced Flared Magazine Well e punto di attacco QD per il ricevitore posteriore. CNC Machined in alluminio 7075-T6, Type III Hard Coat Anodized.
- UPPER RECEIVER: Mil-Spec con segni di indicizzazione e M4 Feed Ramps. CNC Machined in alluminio 7075-T6, Type III Hard Coat Anodized.
- BARREL: Acciaio Chrome Moly Vanadium, Cold Hammer Forged, 1:7 Twist, profilo governativo da 16", rivestito in cromo, Mil-Spec Heavy Phosphate Coated, e HP/MPI Tested.
- GAS SYSTEM: Blocco gas a profilo basso pinzato, CNC Machined in acciaio 4140 indurito e rivestito in Mil-Spec Heavy Phosphate, mid-length, Direct Impingement.
- MUZZLE DEVICE: Soppressore di fiamma Daniel Defense, in acciaio inox 17-4 PH, finitura Salt Bath Nitride.
- BOLT CARRIER GROUP: Profilo M16, Mil-Spec MP Tested, rivestito in cromo, Gas Key correttamente bloccato.
- BUFFER: H Buffer.
- SIGHTS: Venduti separatamente.
- HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC Machined in alluminio 6061-T6, Type III Hard Coat Anodized.
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, corpo CNC Machined in alluminio 7075-T6, maniglie e gancio CNC Machined in alluminio 6061-T6, pin in acciaio inossidabile di alta resistenza, Type III Hard Coat Anodized.
- RECEIVER EXTENSION: Estensione Mil-Spec 7075-T6 in alluminio a 6 posizioni.
- BUTTSTOCK: Calciolo Daniel Defense, in polimero riempito di vetro con rivestimento Soft Touch.
- PISTOL GRIP: Impugnatura Daniel Defense, in polimero riempito di vetro con rivestimento Soft Touch.
- GRIP: Impugnatura verticale Daniel Defense, in polimero riempito di vetro con rivestimento Soft Touch.
- RAIL PANELS: Pannelli rail Daniel Defense realizzati in Santoprene, resistenti al calore fino a 300° F.
Fatto negli USA!
Specifiche:
- Mounting System: Picatinny
- Calibro: 5.56mm NATO
- Filettatura della volata: 1 ⁄ 2 × 28 TPI (Filetti per pollice)
- Gas System: Mid-length
- lunghezza canna: 16"
- Profilo canna: Governativo
- Peso del prodotto: 6.59 lbs
- lunghezza: 32 1/4" – 35 7/8”
- Caricatore: DD Magazine con capacità di 32 colpi nella stessa dimensione dei caricatori standard da 30 colpi
- Custodia: Custodia in plastica ad impatto Daniel Defense Full-Latch
Aiuto e contatti
Newsletter
Visualizzazione classica
Visualizzazione mobile