Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
757253003981 749002482
Most new cases have dents, irregularities and burrs at the mouth of the case. These cases should be sized, expanded and chamfered with a deburring tool. The Forster Inside-Outside Deburring Tool is a double-ended, multi-function piece of equipment that can be used by hand, by lathe, or attached to the special DBT Base (sold separately). The Inside-Outside Deburring Tool handles all cartridge cases from .17 to .45 caliber. To prepare for accurate bullet seating, insert the pointed end to chamfer the inside of the case mouth. Fit the open end over the mouth to remove exterior burrs. Sharp corners that result from trimming a case can be removed quickly and accurately with this tool by using its precision-ground and hardened cutting edges.
41.9 41.9 1 CHF
Référence: 749002482
FORSTER PRODUCTS, INC. DEBURRING TOOL, INSIDE-OUTSIDE
Ref Fabricant: DB1000 757253003981 La plupart des nouveaux cas ont des bosses, des irrégularités et des bavures à l'embouchure de l'affaire. Ces cas devraient être de taille, élargi et chanfreiné avec un outil d'ébavurage. L'outil d'ébavurage Forster intérieur-extérieur est une pièce amphidrome, multi-fonction d'équipement pouvant être utilisé à la main, par tour, ou fixé à la Base de DBT spécial (vendu séparément). L'outil d'ébavurage intérieur-extérieur gère toutes les douilles de.17 de calibre.45. Pour préparer aux sièges de balle précise, insérer l'extrémité pointue pour émousser l'intérieur de la bouche d'affaire. Glisser l'extrémité ouverte sur la bouche pour enlever les bavures extérieures. Les angles aigus qui résultent de tailler un cas s'éliminent rapidement et avec précision avec cet outil à l'aide de ses arêtes de coupe de précision-terre et durcis.
41.9 CHF 7 CHF 41.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques

Poids du colis: 0.059kg Hauteur d'expédition: 1mm Largeur d'expédition: 83mm Longueur d'expédition: 146mm

Détails de l'article

Fabriqué au USA



Most new cases have dents, irregularities and burrs at the mouth of the case. These cases should be sized, expanded and chamfered with a deburring tool. The Forster Inside-Outside Deburring Tool is a double-ended, multi-function piece of equipment that can be used by hand, by lathe, or attached to the special DBT Base (sold separately). The Inside-Outside Deburring Tool handles all cartridge cases from .17 to .45 caliber. To prepare for accurate bullet seating, insert the pointed end to chamfer the inside of the case mouth. Fit the open end over the mouth to remove exterior burrs. Sharp corners that result from trimming a case can be removed quickly and accurately with this tool by using its precision-ground and hardened cutting edges.
Newsletter