Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Entdecke die perfekte Lösung für dein Trijicon RMR Red Dot Sight!
Der EAA TANFOGLIO WITNESS TRIJICON RMR SIGHT MOUNT von EGW ist die ideale Montage für dein Zielgerät. Hier sind die Details:
Produktbeschreibung
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Montagehardware: (2) 6-32 Flat Head Schrauben, (1) 6-32 X 3/16 Set Schraube
- Kompatibilität: Trijicon RMR, Holosun HS507C
Passend für:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Nicht passend für:
Um dein Trijicon RMR Red Dot Sight zu montieren, entferne einfach die hintere Visierung deines Gewehrs und ersetze sie durch unsere Montage. Es sind keine Änderungen erforderlich. Du kannst unsere Montage jederzeit wieder abnehmen und deine hintere Visierung zurücksetzen. Die Montagehardware ist im Lieferumfang enthalten.
Installationsanleitung
- Entferne die hintere Visierung*
- Installiere die EGW Sight Mount in der Dovetail
- Ziehe die Set Schraube an (sofern zutreffend)
- Platziere das Red Dot Sight auf der EGW Sight Mount (ein kleines Stück Papier zwischen dem Red Dot Sight und der Montage erleichtert die Entfernung und schützt das Red Dot Sight vor Loctite).
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf
- Ziehe die Montageschrauben mit 15in/lbs an
Hinweis: Die mit dieser Montage gelieferten Schrauben benötigen einen 5/64'' Inbusschlüssel für die Installation.