Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

SHILEN
FITTED BARRELS FOR SMALL RING MAUSER 93-96

801225102
Short-Chambered & Threaded To Fit Most Small Ring Actions
A "no lathe" way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs.

Click here to view contour specifications.

SPECS: CM steel. .980" diameter x .645" long, - 12 tpi, "V" thread. 26" (66cm) long.

689.9 689.9 1 CHF
Référence: 801225102
SHILEN .250 SAV. #2 CONTOUR, 10 TWIST
Ref Fabricant: 250102CM Une façon de « aucun tour » pour transformer un petit excédent anneau 93-96 un sporter. Déjà enfilée avec la chambre a laissé un peu courte. Après l'installation, utilisez un alésoir de finition main tourné pour approfondir jusqu'à ce que l'espace de tête est parfait. (Alésoir et jauges d'espace de tête requis.) Fabriquées selon nos spécifications de Shilen.NOTE : ces actions ne sont pas aussi fortes que le Mauser 98. Les barils énumérés sont chambrées pour cartouches de basse pression. Canons, leur utilisation devraient être congédiés seulement avec les cartouches standards, usine-équivalent. Handloads ne doit pas dépasser fiche SAAMI.
689.9 CHF 0 CHF 689.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 250 Savage Finition: Chrome Moly Longueur: 25'' Manufacture: Mauser Modèle: 94, 93, 96, 95 Pas de Rayure: 1-10 Poids du Canon: 2.84 lbs Spécificité: Standard Usine

Restrictions d'Achat

  • Permis d'acquisition d'arme requis

Caractéristiques

Calibre: 250 Savage Finition: Chrome Moly Longueur: 25'' Manufacture: Mauser Modèle: 94,93,96,95 Pas de Rayure: 1-10 Poids du Canon: 2.84 lbs Spécificité: Standard Usine Poids du colis: 1.225kg Hauteur d'expédition: 25mm Largeur d'expédition: 30mm Longueur d'expédition: 660mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.c



Short-Chambered & Threaded To Fit Most Small Ring Actions
A "no lathe" way to turn a surplus Small Ring 93-96 into a sporter. Already threaded with the chamber left slightly short. After installation, use a hand-turned finish reamer to deepen until headspace is perfect. (Reamer and Headspace Gauges required.) Made to our specifications by Shilen.NOTE: These actions are not as strong as the Mauser 98. The barrels listed are chambered for low pressure cartridges. Guns using them should be fired only with standard, factory-equivalent rounds. Handloads MUST NOT exceed SAAMI specs.

Click here to view contour specifications.

SPECS: CM steel. .980" diameter x .645" long, - 12 tpi, "V" thread. 26" (66cm) long.

Newsletter