Il mio account (Accesso)
Il Carrello è vuoto.
0
Carrello
Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
Lingue: Deutsch Français Italiano
Home Parti Carabine Componenti receiver Componenti buffer tube Componenti buffer tube FORWARD CONTROLS DESIGN A5 CASTLE NUT
697566711138 430103538
CN5F (Castle Nut, A5, Forward Controls) is an extended version of CNF Forward Controls Design (FCD) have been making since 2018. CN5F is designed specifically for the superb Vltor A5 system, CN5F is 0.1" longer, and is as long as FCD can make a castle nut while ensuring backward compatibility, and the stock's ability to fully collapse on Vltor's RE-A5 and FCD's RE5F. Note: not all stocks will fully collapse on A5 compatible REs. For more information on the differences between RE-A5, RE5F and RE10/A5SR, please follow this link: https://www.forwardcontrolsdesign.com/Vltor-RE-A5-vs-RE10-A5SR_ep_78-1.html CN5F aims to cover as much of the threaded area of a receiver extension (RE) as possible. It could be made longer, but it will run into backward compatibility issues with some REs' timing when installing the castle nut and end plate on the RE. CN5F is made specifically for the Vltor A5 system, and it will allow even the longest carbine stocks to fully collapse on RE-A5 and FCD's RE5F. While CN5F will also work on standard TDP spec length RE, the additional length of the castle nut will prevent the carbine stock to fully collapse. Other than its length, CN5F shares common features with its smaller brother, CNF. The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. Over the years, FCD have consistently come up with two minor gripes, first is its staking notches seem rather shallow and short, second is FCD don't enjoy using the castle nut's wrench notches as serrations (FCD's fingers invariably find their way to these sharp cutouts) to rotate it towards to the end plate while installing it. CN5F (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with couple of changes: 0.1" longer. Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts. Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places, FCD are not advocating staking in more than two places, CNF's 4 staking notches mean that, at all times, 3 will be visible and available for staking, it simply gives the user more staking location options. Coarse serrations on the wrench side of the nut, a single use feature to make it easier while rotating the CNF towards the end plate. It is FCD’s opinion that a castle nut should be staked per TM, CNF's and CN5F's longer and deeper notch reinforces the belief, that once installed and staked, it will not loosen without the user's deliberate action. Forward Controls Design like the idea of quick detach, but some things on an AR are meant to stay put, and considerable effort was made to ensure that by the original designers. CNF and CN5F are a continuation and evolution in that direction. CN5F is billet machined in 4140 PH steel, and black nitrided (Cerakoted FDE, OD green, and burnt bronze also available). As with everything Forward Controls Design produces, it is proudly made in the USA. Weight: 0.51oz Material: 4140 PH Made in USA
Altro...
42.9 49.9 4 CHF
N. prodotto: 430103538
FORWARD CONTROLS DESIGN A5 CASTLE NUT, BLACK
Parti Fabbricante: CN5F BLK 697566711138
42.9 CHF 10 CHF 42.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Colore: Black Materiale: Acciaio
Domande

Caratteristiche

Adatto per: AR-15 Colore: Black Materiale: Acciaio Peso della spedizione: 0.572kg Altezza di spedizione: 51mm Larghezza di spedizione: 83mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



N. prodotto: 430103539
FORWARD CONTROLS DESIGN A5 CASTLE NUT, FLAT DARK EARTH
Parti Fabbricante: CN5F FDE 697566711169
49.9 CHF 3 CHF 49.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Colore: Flat Dark Earth Materiale: Acciaio
Domande
N. prodotto: 430103541
FORWARD CONTROLS DESIGN A5 CASTLE NUT, OLIVE DRAB GREEN
Parti Fabbricante: CN5F ODG 697566711176
49.9 CHF 3 CHF 49.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Colore: Olive Drab Green Materiale: Acciaio
Domande
N. prodotto: 430103540
FORWARD CONTROLS DESIGN A5 CASTLE NUT, BURNT BRONZE
Parti Fabbricante: CN5F BB 697566711183
49.9 CHF 0 CHF 49.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Colore: Burnt Bronze Materiale: Acciaio
Domande
CN5F (Castle Nut, A5, Forward Controls) is an extended version of CNF Forward Controls Design (FCD) have been making since 2018. CN5F is designed specifically for the superb Vltor A5 system, CN5F is 0.1" longer, and is as long as FCD can make a castle nut while ensuring backward compatibility, and the stock's ability to fully collapse on Vltor's RE-A5 and FCD's RE5F. Note: not all stocks will fully collapse on A5 compatible REs. For more information on the differences between RE-A5, RE5F and RE10/A5SR, please follow this link: https://www.forwardcontrolsdesign.com/Vltor-RE-A5-vs-RE10-A5SR_ep_78-1.html CN5F aims to cover as much of the threaded area of a receiver extension (RE) as possible. It could be made longer, but it will run into backward compatibility issues with some REs' timing when installing the castle nut and end plate on the RE. CN5F is made specifically for the Vltor A5 system, and it will allow even the longest carbine stocks to fully collapse on RE-A5 and FCD's RE5F. While CN5F will also work on standard TDP spec length RE, the additional length of the castle nut will prevent the carbine stock to fully collapse. Other than its length, CN5F shares common features with its smaller brother, CNF. The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. Over the years, FCD have consistently come up with two minor gripes, first is its staking notches seem rather shallow and short, second is FCD don't enjoy using the castle nut's wrench notches as serrations (FCD's fingers invariably find their way to these sharp cutouts) to rotate it towards to the end plate while installing it. CN5F (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with couple of changes: 0.1" longer. Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts. Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places, FCD are not advocating staking in more than two places, CNF's 4 staking notches mean that, at all times, 3 will be visible and available for staking, it simply gives the user more staking location options. Coarse serrations on the wrench side of the nut, a single use feature to make it easier while rotating the CNF towards the end plate. It is FCD’s opinion that a castle nut should be staked per TM, CNF's and CN5F's longer and deeper notch reinforces the belief, that once installed and staked, it will not loosen without the user's deliberate action. Forward Controls Design like the idea of quick detach, but some things on an AR are meant to stay put, and considerable effort was made to ensure that by the original designers. CNF and CN5F are a continuation and evolution in that direction. CN5F is billet machined in 4140 PH steel, and black nitrided (Cerakoted FDE, OD green, and burnt bronze also available). As with everything Forward Controls Design produces, it is proudly made in the USA. Weight: 0.51oz Material: 4140 PH Made in USA
Altro...
SOCIAL MEDIA
BROWNELLS.CH
CATALOGO PRODOTTI
ORDINARE
CUSTOMER SERVICE
Benvenuti!
Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!
 
La nostra offerta
Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.
Cloudflare
DIBS - Payments made easy
 
Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich Brownells Česko - Největší světový dodavatel součástí zbraní, střeleckého příslušenství a zbrojního nářadí
* Prezzi comprensivi di IVA più spedizione

© 2024 Brownells Svizzera
Part of the Brownells Europe Group

Visualizzazione classica Visualizzazione mobile
Newsletter