Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

FIX IT STICKS
FRONT SIGHT BIT & PIN PUNCH COMBO PACK FOR GLOCK®

898207002176 100027823
Fast, Easy, Painless Disassembly/Reassembly of Your Glock
The Glock® pistol travels light, both in the number of parts that comprise it and in the number of tools needed to disassemble it for basic maintenance. Actually, it requires only two tools and the Fix-It Sticks Glock tool kit contains them. Half of the Fix-It Sticks Glock® took kit’s dynamic duo is a 3/32" pin punch for removing the all the pins that hold the pistol together, including those that retain the pistol’s fire control mechanism in its polymer frame. The Duo’s other half is a 3/16" in thin-walled hex nut driver for removing the screw that anchors the Glock’s front sight. An magnet inside the hex driver handily retains the screw so you don’t lose it. Hardened tool steel Black oxide finish Fits any Fix-It Stick driver, Brownells Magna-Tip® or standard 1/4" hex bit driver Both tools are machined from hardened steel barstock - none of this cheap front-of-the-hardware store stuff that breaks as soon as you apply a little torque!  They are compatible with any Fix-It-Sticks handles AND any standard 1/4" bit driver - so, yes, they’ll fit your Magna-Tip® driver handles! Or pair them up with the basic Fix-It Sticks T-handle tool (#100-018-238, sold separately).
32.9 32.9 1 CHF
Artikel-Nr.: 100027823
FIX IT STICKS FRONT SIGHT BIT & PIN PUNCH COMBO PACK FOR GLOCK®
Herstellerproduktnummer: FISGLCP 898207002176 Die Glock®-Pistole ist leicht zu transportieren, sowohl in Bezug auf die Anzahl der Teile, aus denen sie besteht, als auch in Bezug auf die Anzahl der Werkzeuge, die zur grundlegenden Wartung zerlegt werden müssen. Tatsächlich werden nur zwei Werkzeuge benötigt, die im Fix-It Sticks Glock-Toolkit enthalten sind. Die Hälfte der Fix-It-Sticks, die Glock® für das dynamische Duo des Bausatzes verwendet hat, ist ein 3/32 "-Stempel zum Entfernen aller Stifte, die die Pistole zusammenhalten, einschliesslich der Stifte, die den Feuerkontrollmechanismus der Pistole in ihrem Polymerrahmen halten. Der andere des Duos Die Hälfte ist ein 3/16 "Inbusschlüssel mit dünnwandiger Sechskantmutter zum Entfernen der Schraube, die das Visier des Glock verankert. Ein Magnet im Innensechskant hält die Schraube handlich fest, damit Sie sie nicht verlieren. Gehärteter Werkzeugstahl Schwarzoxid-Finish Passt auf jeden Fix-It-Stick-Treiber, Brownells Magna-Tip® oder Standard-1/4 "-Hexbit-Treiber das bricht, sobald Sie ein wenig Drehmoment aufbringen! Sie sind kompatibel mit allen Fix-It-Sticks-Griffen UND allen Standard-1/4 "-Bit-Treibern - ja, sie passen auf Ihre Magna-Tip®-Treibergriffe! Oder kombinieren Sie sie mit dem Grundwerkzeug Fix-It Sticks mit T-Griff (Nr. 100-018-238, separat erhältlich).
32.9 CHF 68 CHF 32.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Hersteller/Modell: Glock

Eigenschaften

Hersteller/Modell: Glock Versandgewicht: 0.031kg Versandhöhe: 127mm Versandbreite: 89mm Versandlänge: 127mm




Fast, Easy, Painless Disassembly/Reassembly of Your Glock
The Glock® pistol travels light, both in the number of parts that comprise it and in the number of tools needed to disassemble it for basic maintenance. Actually, it requires only two tools and the Fix-It Sticks Glock tool kit contains them. Half of the Fix-It Sticks Glock® took kit’s dynamic duo is a 3/32" pin punch for removing the all the pins that hold the pistol together, including those that retain the pistol’s fire control mechanism in its polymer frame. The Duo’s other half is a 3/16" in thin-walled hex nut driver for removing the screw that anchors the Glock’s front sight. An magnet inside the hex driver handily retains the screw so you don’t lose it. Hardened tool steel Black oxide finish Fits any Fix-It Stick driver, Brownells Magna-Tip® or standard 1/4" hex bit driver Both tools are machined from hardened steel barstock - none of this cheap front-of-the-hardware store stuff that breaks as soon as you apply a little torque!  They are compatible with any Fix-It-Sticks handles AND any standard 1/4" bit driver - so, yes, they’ll fit your Magna-Tip® driver handles! Or pair them up with the basic Fix-It Sticks T-handle tool (#100-018-238, sold separately).
Newsletter