Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
661120658870 EU1000351
24.9 24.9 1 CHF
N. prodotto: EU1000351
Frankford Arsenal Cartridge Overall Length Gage
Parti Fabbricante: 965887 661120658870 If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.
24.9 CHF 0 CHF 24.90 *
Tempi di consegna circa 15-20 giorni dal magazzino europeo.

Descrizione originale

If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.

Caratteristiche

Peso della spedizione: 0.03kg Altezza di spedizione: 99mm Larghezza di spedizione: 22mm Lunghezza di spedizione: 191mm

Traduzione automatica

If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.



Newsletter