Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
661120658870 EU1000351
24.9 24.9 1 CHF
Référence: EU1000351
Frankford Arsenal Cartridge Overall Length Gage
Ref Fabricant: 965887 661120658870 If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.
24.9 CHF 0 CHF 24.90 *
Délai de livraison environ 15-20 jours depuis l'entrepôt européen.

Description

If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.

Caractéristiques

Poids du colis: 0.03kg Hauteur d'expédition: 99mm Largeur d'expédition: 22mm Longueur d'expédition: 191mm

Traduction automatique

If you have a cleaning rod and a set of calipers, you can now determine the optimum OAL for any bullet in less than two minutes. This simple kit consists of two clamps that easily attach to any cleaning rod, ¼” in diameter, or less. Simply insert a cleaning rod into the barrel so that it contacts the bolt face, then install one clamp at the end of the barrel. Remove the cleaning rod and insert a dummy round into the chamber so that the bullet is in contact with the rifling. Touch the cleaning rod end to the bullet and attach the second clamp at the end of the barrel. Remove and measure the distance between the two clamps, or use as a gauge to check the seating depth set-up during your reloading sequence. Works on all rifles.



Newsletter