GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
Das ASSAULTER BELT SYSTEM V3 – deine Lösung für maximale Flexibilität und Stabilität!
Der GBRS Group Assaulter Belt System V3 nutzt ein 2-Gurt-System, um eine leichte, flexible, aber gleichzeitig starre und stabile Plattform zu schaffen, an der du Ausrüstung, Holster und Zubehör befestigen kannst. Mit einem Basisgurt aus Type 13, 1-23/32” Gurtband (7000 lbs Zugfestigkeit) und einem Feld aus PALS-Gurtband, das aus einem semi-starren, gewebten Thermo-Polymer (Patentanmeldung läuft) lasergefertigt ist, bleibt deine Ausrüstung immer an etwas Festem befestigt, während der Gürtel leicht und bequem bleibt.
Um das Ganze abzurunden, haben wir das Gurtband doppelt mit einem „W“-Stich an einer lastengerechten 1,75” AustriAlpin Cobra Schnalle mit D-Ring für die Befestigung von Helikopter-Lanyards und anderem Zubehör befestigt. Der äussere Gürtel hat eine innere Fläche aus „Schleifen“-Velcro, um an einem flachen „Haken“-Innengürtel befestigt zu werden. Das haben wir so gemacht, weil Haken niemals zur Körperseite getragen werden sollten, besonders in einem stark beanspruchten Bereich (Gürtelbereich).
Das Innengurtsystem besteht aus einem flachen „Haken“-Innengürtel mit einer einzelnen Schicht aus 1,5” Scuba-Gurtband. Dies ergibt ein System, das auch als nicht-metallischer EDC-Gürtel dient und eine bequeme Möglichkeit bietet, den abrasiven Hakenbereich des Innengürtels beim Wenden nach innen abzudecken. Die einzelne Schicht des Scuba-Gurtbands sorgt für eine starre Oberfläche, an der IWB-Holster fest gesichert werden können.
SPEZIFIKATIONEN
-
Äusserer Gürtel:
-
ONE-WRAP® ¾”
-
Schleife 1” & 1.5”
-
Binding ¾”
-
Tegris 12 Schichten
-
AustriAlpin D-Ring COBRA® ProStyle Schnalle 1.75” 18kN*
-
Gurtband Type 13, 1-23/32”
-
Innengürtel:
-
3610 Flacher Schleifen 1.5”
-
HTH Extrudierter Haken 841 1.5”
-
Scuba-Gurtband 1.5”
Gewicht: Innerer und äusserer Gürtel zusammen
-
Grösse S: 12.9 oz.
-
Grösse M: 13.8 oz.
-
Grösse L: 14.7 oz.
-
Grösse XL: 16.8 oz.
*HINWEIS ZUR SCHNALLE: Die Registrierung, Bewertung, Genehmigung und Beschränkung von Chemikalien (REACH-Verordnung) schützt die Umwelt vor den schädlichen Auswirkungen chemischer Substanzen. Änderungen an dieser Verordnung im Jahr 2023 könnten die Schnalle unseres V3-Gürtels visuell beeinflusst haben. Dieser minimale visuelle Unterschied hat keinen Einfluss auf die Funktionalität des Gürtels.
VERTRAULICHKEIT:
-
Alle MOLLE-Gewebe-Taschen/Produkte
-
Holster mit Gürtel-Ösen (z.B. Safariland® 6075UBL)
-
True North Modular Holster Adapter
GRÖSSEN:
**Miss deinen Taillenumfang für die richtigen Masse, benutze nicht die Hosengrösse***
-
Grösse S passt für Taillengrössen 27”-32” (ideale Passform 27”-31”) – 17 MOLLE-Plätze
-
Grösse M passt für Taillengrössen 31”-36” (ideale Passform 31”-34”) – 20 MOLLE-Plätze
-
Grösse L passt für Taillengrössen 35”-41” (ideale Passform 35”-39”) – 23 MOLLE-Plätze
-
Grösse XL passt für Taillengrössen 40”-50” (ideale Passform 40”-46”) – 26 MOLLE-Plätze