Extra heavy-duty, brass bristled brushes remove the toughest powder and wad fouling from chambers. Looped and twisted steel shanks with contoured, solvent-proof handles. Long enough to clear barrel extension.
Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
Spécifications : 12 po (30,5 cm) globalement.. fil de laiton d'ø 008"(.20mm).
Plus...
Évaluations client de BROWNELLS 16 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 3.5
Poor Construction(16.12.2015)
Pulled it right out of the package and the brush separated from the handle. The brush seems to be of decent quality, but the overall construction is poor. I'll epoxy the brush into the handle. Come on Brownells!
GREAT VALUE(18.11.2009)
I USE THIS 12 GA BRUSH ON ALL OF THE DEPARTMENT GUNS. I HAVE USED THE SAME ONE FOR YEARS TO CLEAN OVER 25 REMINGTON POLICE MAGNUMS. I DIP IT IN HOPPES 9 AND TWIST AWAY THE GRIME.
Works Great!(06.04.2010)
I shoot Cowboy Action and it's important to have the shells come out fast after firing so you can reload Fast. I wrap a gunwipe around the bristles and swab after each stage.
Just the thing(11.07.2010)
If you don't have one of these, dont make another order here without one. Just plain work. CS27
Handles pull off(25.09.2011)
These looked like an excellent way to clean a dirty shotgun chamber. Unfortunately the handles pull off fairly easily and need to be replaced with a wooden dowel. Once that modification is made they work great.
What Could Have Been...(21.07.2015)
Seems like a simple idea and it works pretty well....except that the handle rotates on the brush so that you can't twist it to clean the chamber. Mine began spinning the first time I used it, the handle will slide in and out on the brush about a half inch and usually I can find a point where it 'holds' for long enough to get the chamber brushed. Thinking about trying to inject some type of glue between the brush 'shaft' and handle. I really do like it in concept and would give it an easy 5 stars if it wasn't necessary to fight with the loose handle.
Référence: 084155016 BROWNELLS 16 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF9CHF 19.90
*
Délai de livraison environ 8-15 jours.
Caractéristiques:Calibre: 10 GaugeCalibre: 16 GaugeManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Calibre:
10 Gauge
Calibre:
16 Gauge
Manufacture:
Universel Fusil de Chasse
Style:
Fusil de Chasse
Poids du colis: 0.068kgHauteur: 18mmLargeur: 48mmLongueur: 340mm
Détails de l'article
Fabriqué au USA
Référence: 084155020 BROWNELLS 20 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF7CHF 19.90
*
Délai de livraison environ 8-15 jours.
Caractéristiques:Calibre: 20 GaugeCalibre: 20 GaugeManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Référence: 084155410 BROWNELLS 410 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF4CHF 19.90
*
Délai de livraison environ 8-15 jours.
Caractéristiques:Calibre: .410 BoreCalibre: .410 BoreManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Référence: 084155010 BROWNELLS 10 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF1CHF 19.90
*
Délai de livraison environ 8-15 jours.
Caractéristiques:Calibre: 10 GaugeCalibre: 10 GaugeManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Référence: 084155028 BROWNELLS 28 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF6CHF 19.90
*
Délai de livraison environ 8-15 jours.
Caractéristiques:Calibre: 28 GaugeCalibre: 28 GaugeManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Référence: 084155012 BROWNELLS 12 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
19.9CHF0CHF 19.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques:Calibre: 12 GaugeCalibre: 12 GaugeManufacture: Universel Fusil de ChasseStyle: Fusil de ChasseQuantité: 1
Extra heavy-duty, brass bristled brushes remove the toughest powder and wad fouling from chambers. Looped and twisted steel shanks with contoured, solvent-proof handles. Long enough to clear barrel extension.
Brosses à poils extra robustes, en laiton enlever la poudre plus difficiles et wad encrassement des chambres. En boucle et tordus shanks en acier avec poignées galbées, solvant à l'épreuve. Assez longtemps pour dégager le prolongement du canon.
Spécifications : 12 po (30,5 cm) globalement.. fil de laiton d'ø 008"(.20mm).
Plus...
Évaluations client de BROWNELLS 16 GAUGE "HANDLED" SHOTGUN CHAMBER BRUSH
Nombre d'évaluations: 6
De brownells.com: 6
Note moyenne: 3.5
Poor Construction(16.12.2015)
Pulled it right out of the package and the brush separated from the handle. The brush seems to be of decent quality, but the overall construction is poor. I'll epoxy the brush into the handle. Come on Brownells!
GREAT VALUE(18.11.2009)
I USE THIS 12 GA BRUSH ON ALL OF THE DEPARTMENT GUNS. I HAVE USED THE SAME ONE FOR YEARS TO CLEAN OVER 25 REMINGTON POLICE MAGNUMS. I DIP IT IN HOPPES 9 AND TWIST AWAY THE GRIME.
Works Great!(06.04.2010)
I shoot Cowboy Action and it's important to have the shells come out fast after firing so you can reload Fast. I wrap a gunwipe around the bristles and swab after each stage.
Just the thing(11.07.2010)
If you don't have one of these, dont make another order here without one. Just plain work. CS27
Handles pull off(25.09.2011)
These looked like an excellent way to clean a dirty shotgun chamber. Unfortunately the handles pull off fairly easily and need to be replaced with a wooden dowel. Once that modification is made they work great.
What Could Have Been...(21.07.2015)
Seems like a simple idea and it works pretty well....except that the handle rotates on the brush so that you can't twist it to clean the chamber. Mine began spinning the first time I used it, the handle will slide in and out on the brush about a half inch and usually I can find a point where it 'holds' for long enough to get the chamber brushed. Thinking about trying to inject some type of glue between the brush 'shaft' and handle. I really do like it in concept and would give it an easy 5 stars if it wasn't necessary to fight with the loose handle.