HELLFIRE TI SELF-TIMING MUZZLE BRAKE The Hellfire has transformed the muzzle brake industry. Unmatched versatility, modularity, ease of use, and performance. With the original 3-Port Hellfire now 8 years old, and the family having grown to include the Hellfire 2P, the Hellfire LFS, and the Hellfire Match, along with a serious family of suppressor mounts, there was always something Area 419 wanted to make. Now, it’s time. This is the Hellfire Ti. CNC Milled right here in Ohio with a Grade 5 6Al-4V Titanium main body, the Hellfire Ti is built for your hunting rifle, with the performance you’d expect on your Match rifle. Features Available in 30, 40, and 50 cal variants, to accommodate common hunting cartridges up to and including 450 Bushmaster and 50 Beowulf Stainless Steel collar for greater mounting strength and durability 2.8oz in 30cal (brake body and collar) – 30% lighter than the Hellfire OG 1.1″ port diameter (27% more braking surface than the Hellfire OG) Brake assembly will add 2.5″ from the thread shoulder (approx 1.9″ added to OAL of barrel) Gray Titanium anodize, reducing glare Flatter first port to reduce blast Progressive upper port geometry to control muzzle flip Patented Hellfire Mount system, for great versatility Caliber Selection For these brakes, caliber selection is simple. If your rifle is a 30-cal rifle (or smaller) you select the “.30 and Under” option. This includes 308, 300 RUM, 30-06. 300 Win Mag, etc – or ANYTHING smaller (7mm, 6.5mm, etc.). If your rifle is 40 cal or smaller (but larger than 30 cal) you should select the “.40 and Under” option. This would include 338s, 357/9mm, etc. If your rifle is 50 cal or smaller (but larger than 40 cal) you should select the “.50 and Under” option. This would include 458s, 45/70, etc. This brake IS NOT RATED FOR 50 BMG.
Scopri il rivoluzionario freno di bocca HELLFIRE TI!
Il HELLFIRE TI SELF-TIMING MUZZLE BRAKE di AREA 419 ha trasformato l'industria dei freni di bocca, offrendo una versatilità, modularità, facilità d'uso e prestazioni senza pari. Con il freno originale a 3 porte Hellfire ora di 8 anni, e la famiglia che si è ampliata per includere il Hellfire 2P, il Hellfire LFS e il Hellfire Match, insieme a una serie di supporti per silenziatori, c'era sempre qualcosa che Area 419 voleva realizzare. Ora, è arrivato il momento. Questo è il Hellfire Ti.
Caratteristiche
- Disponibile in varianti da 30, 40 e 50 cal, per accogliere le cartucce da caccia comuni fino e comprese 450 Bushmaster e 50 Beowulf
- Collare in acciaio inossidabile per una maggiore resistenza e durata di montaggio
- 2.8oz in 30cal (corpo del freno e collare) – 30% più leggero rispetto all'Hellfire OG
- Diametro della porta di 1.1″ (27% più superficie di frenata rispetto all'Hellfire OG)
- L'assemblaggio del freno aggiungerà 2.5″ dalla spalla della filettatura (circa 1.9″ aggiunti alla lunghezza totale della canna)
- Anodizzazione in titanio grigio, riducendo il riflesso
- Porta iniziale più piatta per ridurre l'esplosione
- Geometria progressiva della porta superiore per controllare il ribaltamento della bocca
- Sistema di montaggio Hellfire brevettato, per una grande versatilità
Selezione del calibro
Per questi freni, la selezione del calibro è semplice:
- Se il tuo fucile è un fucile da 30 cal (o più piccolo), seleziona l'opzione “.30 e sotto”. Questo include 308, 300 RUM, 30-06, 300 Win Mag, ecc. – o QUALSIASI cosa più piccola (7mm, 6.5mm, ecc.).
- Se il tuo fucile è da 40 cal o più piccolo (ma più grande di 30 cal), dovresti selezionare l'opzione “.40 e sotto”. Questo includerebbe 338, 357/9mm, ecc.
- Se il tuo fucile è da 50 cal o più piccolo (ma più grande di 40 cal), dovresti selezionare l'opzione “.50 e sotto”. Questo includerebbe 458, 45/70, ecc. Questo freno NON È VALUTATO PER 50 BMG.