Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes two ³/8" square bars, one right hand bar and one left hand bar, plus three high-speed steel inserts and one carbide insert that fit either bar.
SPECS: One right-hand and one left-hand bar, both .375" square shank, 6" OAL. Inserts - three HSS VCMW-221 inserts and one carbide VCMW-221 insert, all 7° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius. Includes three MS-1153 screws and T-7 wrench.
Plus...
Porte-outils & Inserts pour profilage
Outillage kits comprennent des porte-outils en acier trempés et inserts en acier haute vitesse pour le tournage, filetage, profilage et travail de coupure. Insertions sont en acier de vitesse haute T-15 (SSC) durci à Rc 65-67, puis finir au sol sur tous les côtés. Ils offrent des performances de vitesse lente excellente, précision interrompu des coupes et une finition lisse sur l'acier inoxydable, Inconel, Monel, métaux exotiques et les plastiques. Carré tige porte-outils et barres d'alésage sont usinés CNC en stock de barres en acier 4140/4142, durci à Rc 48-50 et ensuite noir oxyde enduit pour résister à la corrosion. Comprend deux barres carrées de ³/8", barre d'une main droite et une gauche main bar, plus trois inserts en acier à haute vitesse et un insert de carbure qui correspondent à chaque barre.
SPECS : autre vers la droite et une seule barre de gauche, tous les deux. 375" carrés de jambe, 6 « OAL. Entre-deux - trois insertions HSS VCMW-221 et un insert en carbure VCMW-221, tous positifs, 7°.250 IC,.125 épais,.110 trou, ouverture supérieure.146.015 rayon. Comprend trois MS-1153 vis et clé T-7.
Plus...
Évaluations client de BROWNELLS HIGH-SPEED STEEL CUTTING 35 PROFILE KIT
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Excellent American Made Quality Tooling(29.09.2017)
This stuff is top quality. Love the HSS steel inserts. Can be easily touched up and sharpened. Great for slow speed gunsmith and hobbyist work. Great finish quality in the 100-300 rpm range on my lathe. Excellent tooling. This is not cheap low quality junk, comes in a nice case and you can get replacement inserts when/if you ever need them.
Very versatile!(17.12.2017)
Find myself using these all the time, They leave a great finish and I love the interchangeable bits.
Référence: 080000836 BROWNELLS HIGH-SPEED STEEL CUTTING 35 PROFILE KIT Ref Fabricant: NONE Outillage kits comprennent des porte-outils en acier trempés et inserts en acier haute vitesse pour le tournage, filetage, profilage et travail de coupure. Insertions sont en acier de vitesse haute T-15 (SSC) durci à Rc 65-67, puis finir au sol sur tous les côtés. Ils offrent des performances de vitesse lente excellente, précision interrompu des coupes et une finition lisse sur l'acier inoxydable, Inconel, Monel, métaux exotiques et les plastiques. Carré tige porte-outils et barres d'alésage sont usinés CNC en stock de barres en acier 4140/4142, durci à Rc 48-50 et ensuite noir oxyde enduit pour résister à la corrosion. Comprend deux barres carrées de ³/8", barre d'une main droite et une gauche main bar, plus trois inserts en acier à haute vitesse et un insert de carbure qui correspondent à chaque barre.
294.9CHF13CHF 294.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes two ³/8" square bars, one right hand bar and one left hand bar, plus three high-speed steel inserts and one carbide insert that fit either bar.
SPECS: One right-hand and one left-hand bar, both .375" square shank, 6" OAL. Inserts - three HSS VCMW-221 inserts and one carbide VCMW-221 insert, all 7° positive, .250 IC, .125 thick, .110 hole, .146 top opening, .015 radius. Includes three MS-1153 screws and T-7 wrench.
Plus...
Porte-outils & Inserts pour profilage
Outillage kits comprennent des porte-outils en acier trempés et inserts en acier haute vitesse pour le tournage, filetage, profilage et travail de coupure. Insertions sont en acier de vitesse haute T-15 (SSC) durci à Rc 65-67, puis finir au sol sur tous les côtés. Ils offrent des performances de vitesse lente excellente, précision interrompu des coupes et une finition lisse sur l'acier inoxydable, Inconel, Monel, métaux exotiques et les plastiques. Carré tige porte-outils et barres d'alésage sont usinés CNC en stock de barres en acier 4140/4142, durci à Rc 48-50 et ensuite noir oxyde enduit pour résister à la corrosion. Comprend deux barres carrées de ³/8", barre d'une main droite et une gauche main bar, plus trois inserts en acier à haute vitesse et un insert de carbure qui correspondent à chaque barre.
SPECS : autre vers la droite et une seule barre de gauche, tous les deux. 375" carrés de jambe, 6 « OAL. Entre-deux - trois insertions HSS VCMW-221 et un insert en carbure VCMW-221, tous positifs, 7°.250 IC,.125 épais,.110 trou, ouverture supérieure.146.015 rayon. Comprend trois MS-1153 vis et clé T-7.
Plus...
Évaluations client de BROWNELLS HIGH-SPEED STEEL CUTTING 35 PROFILE KIT
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
Excellent American Made Quality Tooling(29.09.2017)
This stuff is top quality. Love the HSS steel inserts. Can be easily touched up and sharpened. Great for slow speed gunsmith and hobbyist work. Great finish quality in the 100-300 rpm range on my lathe. Excellent tooling. This is not cheap low quality junk, comes in a nice case and you can get replacement inserts when/if you ever need them.
Very versatile!(17.12.2017)
Find myself using these all the time, They leave a great finish and I love the interchangeable bits.