HUNT SCOPE RINGS Given the success of their MATCH and TACTICAL scope mounts, Area 419 knew what the HUNT rings needed to be. Light, rigid, and able to hold onto an optic in a dramatic recoiling environment. To do this was no small manufacturing task. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made. Like most rings, these begin as separate parts. Area 419 are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, Area 419 produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in their world-class machining centers. Rings are then brought off the machine in sets, and packaged together so you know that your rings were made for one another, and you can rely on them for decades. Is it overkill? Probably. But Area 419 think it’s the right way. So that’s what Area 419 are going to do. NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT THEIR MATCH OR TACTICAL OFFERINGS. Specifications: Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware) Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum) Weight: 4 oz/set (30mm Medium)
Scopri i nuovi anelli per ottiche HUNT di AREA 419!
Gli HUNT SCOPE RINGS sono progettati per offrire una soluzione leggera e rigida, in grado di mantenere saldamente un'ottica anche in ambienti di forte rinculo. Grazie al successo dei loro supporti ottici MATCH e TACTICAL, Area 419 ha saputo creare anelli che soddisfano le esigenze più elevate.
Dettagli del prodotto
Realizzare questi anelli non è stato un compito semplice. Area 419 ha sviluppato un processo che garantisce anelli finali perfettamente abbinati, con interni in alluminio grezzo, per una presa sull'ottica che è più affidabile e precisa di qualsiasi altro prodotto disponibile sul mercato.
Come la maggior parte degli anelli, questi iniziano come parti separate. Area 419 produce le basi e i cappucci in lotti. Mentre molti realizzano queste parti, le inviano all'anodizzazione e poi semplicemente assemblano, Area 419 si concentra su passaggi aggiuntivi. Una volta che queste parti tornano dall'anodizzazione, vengono assemblate completamente, riposte in apposite strutture per rotaie, con i cappucci serrati secondo le specifiche su distanziatori appositamente realizzati (per dare spazio agli anelli per serrarsi sull'ottica), e infine forate come set nei loro centri di lavorazione di classe mondiale.
Gli anelli vengono poi rimossi dalla macchina in set e confezionati insieme, in modo da sapere che i tuoi anelli sono stati creati l'uno per l'altro, e puoi fare affidamento su di essi per decenni.
È eccessivo? Probabilmente.
Ma Area 419 crede che sia il modo giusto. Ecco perché Area 419 seguirà questa strada.
Nota Importante
PER MANTENERE LE DIMENSIONI E IL PESO DI QUESTI ANELLI AL MINIMO, NON CI SONO PUNTI DI ATTACCO PER ACCESSORI SU QUESTI ANELLI. SE DESIDERI POTER AGGIUNGERE ACCESSORI AI TUOI ANELLI, CONTROLLA LE LORO OFFERTE MATCH O TACTICAL.
Specifiche
- Materiale: 7075 Aerospace Grade Billet Aluminum (con hardware in acciaio inossidabile)
- Rivestimento: Type 3 Hardcoat Anodize (il foro interno è in alluminio grezzo)
- Peso: 4 oz/set (30mm Medium)