Brownells Schweiz - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Suisse / Schweiz

EGW
KIMBER 1911 ADJUSTABLE SIGHT VORTEX VIPER/VENOM SIGHT MOUNT

841370112906 296000663
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation) Ruger SR1911 (adjustable rear sights for windage and elevation)
79.9 79.9 1 CHF
Artikel-Nr.: 296000663
EGW ADJ SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS KIMBER 1911 BLK
Herstellerproduktnummer: 49316 841370112906
79.9 CHF 2 CHF 79.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Ruger, Kimber Material: Aluminum Modell: 1911, SR1911

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: Kimber,Ruger Material: Aluminum Modell: 1911,SR1911 Versandgewicht: 0.045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm

Artikeldetails

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation) Ruger SR1911 (adjustable rear sights for windage and elevation)
Newsletter