Features: Ensure tube feeds smooth and has zero binding Available in 12 and 20 gauge Features a red finish Machined from aluminum Fits most shotgun magazine tubes Will not fit Mossberg shotguns
SPECS: Fits most shotgun extension tubes. Does not fit Mossberg shotguns.
Mehr...
Merkmale: Sicherstellen, dass der Rohrvorschub glatt ist und keine Bindung aufweist. Erhältlich in den Stärken 12 und 20. Verfügt über ein rotes Finish. Hergestellt aus Aluminium. Passt für die meisten Schrotflintenmagazinrohre. Passt nicht für Mossberg-Schrotflinten
TECHNISCHE DATEN: Für die meisten Verlängerungsrohre für Schrotflinten geeignet. Passt nicht zu Mossberg Flinten.
Mehr...
Kundenbewertungen zu NORDIC COMPONENTS LOW-DRAG FOLLOWER, 12GA.
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 2.7
Terrible product(24.09.2014)
Nothing about this product is good. First of all, the description is wrong. The 20 gauge follower I recieved had a green finish not a red, not that it really matters. The first problem with this follower is its too long. Using this follower reduced my magazine capacity by 1 shell. The bigger problem is that loading the magazine with this follower goes smoothly the first time but as soon as you empty the magazine the follower gets jammed at the end. The follower is not tapered enough and requires serious force to unjam for additional reloads. I wouldn't reccomend this product to my worst enemy.
Don't waste your time (03.10.2014)
This product plain out stinks. Too long, wrong dimensions, gets jammed, reduces mag capacity. Save yourself the hassle and buy the Brownells stainless slotted follower.
Save your money(05.11.2015)
Does not fit my Ithaca model 37. Useless to me.
Will Not Fit FN SLP Shotguns(25.06.2013)
Even though it is not stated in the description, this part will not work in the FN SLP family of shotguns. The slight extension that is stamped 'made in the usa' will interfere with the lifter.
fits Benelli Supernova(21.07.2013)
Nice upgrade from stock follower. Oddly, the Nordic site says that it does not fit the SN, but it fits perfectly.
They fit KelTec KSG(18.07.2014)
They fit the Kel-Tec KSG shotgun, both with the original springs as well as with the Wolff 65165 6A 12 GA. XP Mag tube springs.
Artikel-Nr.: 100011061 NORDIC COMPONENTS LOW-DRAG FOLLOWER, 12GA. Herstellerproduktnummer: FOL-SG-12816696021201 Merkmale: Sicherstellen, dass der Rohrvorschub glatt ist und keine Bindung aufweist. Erhältlich in den Stärken 12 und 20. Verfügt über ein rotes Finish. Hergestellt aus Aluminium. Passt für die meisten Schrotflintenmagazinrohre. Passt nicht für Mossberg-Schrotflinten
Artikel-Nr.: 100011062 NORDIC COMPONENTS LOW-DRAG FOLLOWER, 20 GA. Herstellerproduktnummer: FOL-SG-20816696021218 Merkmale: Sicherstellen, dass der Rohrvorschub glatt ist und keine Bindung aufweist. Erhältlich in den Stärken 12 und 20. Verfügt über ein rotes Finish. Hergestellt aus Aluminium. Passt für die meisten Schrotflintenmagazinrohre. Passt nicht für Mossberg-Schrotflinten
33.9CHF0CHF 33.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Features: Ensure tube feeds smooth and has zero binding Available in 12 and 20 gauge Features a red finish Machined from aluminum Fits most shotgun magazine tubes Will not fit Mossberg shotguns
SPECS: Fits most shotgun extension tubes. Does not fit Mossberg shotguns.
Mehr...
Merkmale: Sicherstellen, dass der Rohrvorschub glatt ist und keine Bindung aufweist. Erhältlich in den Stärken 12 und 20. Verfügt über ein rotes Finish. Hergestellt aus Aluminium. Passt für die meisten Schrotflintenmagazinrohre. Passt nicht für Mossberg-Schrotflinten
TECHNISCHE DATEN: Für die meisten Verlängerungsrohre für Schrotflinten geeignet. Passt nicht zu Mossberg Flinten.
Mehr...
Kundenbewertungen zu NORDIC COMPONENTS LOW-DRAG FOLLOWER, 12GA.
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 2.7
Terrible product(24.09.2014)
Nothing about this product is good. First of all, the description is wrong. The 20 gauge follower I recieved had a green finish not a red, not that it really matters. The first problem with this follower is its too long. Using this follower reduced my magazine capacity by 1 shell. The bigger problem is that loading the magazine with this follower goes smoothly the first time but as soon as you empty the magazine the follower gets jammed at the end. The follower is not tapered enough and requires serious force to unjam for additional reloads. I wouldn't reccomend this product to my worst enemy.
Don't waste your time (03.10.2014)
This product plain out stinks. Too long, wrong dimensions, gets jammed, reduces mag capacity. Save yourself the hassle and buy the Brownells stainless slotted follower.
Save your money(05.11.2015)
Does not fit my Ithaca model 37. Useless to me.
Will Not Fit FN SLP Shotguns(25.06.2013)
Even though it is not stated in the description, this part will not work in the FN SLP family of shotguns. The slight extension that is stamped 'made in the usa' will interfere with the lifter.
fits Benelli Supernova(21.07.2013)
Nice upgrade from stock follower. Oddly, the Nordic site says that it does not fit the SN, but it fits perfectly.
They fit KelTec KSG(18.07.2014)
They fit the Kel-Tec KSG shotgun, both with the original springs as well as with the Wolff 65165 6A 12 GA. XP Mag tube springs.