M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Altro...
Muso di M1 Garand montato pulizia asta guida attrito si adatta sul muso per il corretto allineamento dell'asta di pulizia con il foro. Camera interna permette per l'inversione del foro pennello o jag senza rimozione della guida. Si adatta fino a 30 canne di calibro come il Dewey barrette rivestite. Opere per tutti i calibri. La nostra guida include una porta solvente per facilità d'uso. Basta scivolare la bussola guida sopra la bacchetta di pulizia, poi installare il jag o pennello sull'asta prima di mettere la museruola Buddy sulla canna. Proteggere che correttamente coronato il muso con il gruppo hew muso Buddy. Il Combo di Buddy M1 contiene il Buddy M1 e M1 muso Buddy.
Altro...
Punteggi dei clienti per TK PRODUCTS M1 BUDDY COMBO
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....
N. prodotto: 100015394 TK PRODUCTS M1 BUDDY COMBO Parti Fabbricante: M1COMBO Muso di M1 Garand montato pulizia asta guida attrito si adatta sul muso per il corretto allineamento dell'asta di pulizia con il foro. Camera interna permette per l'inversione del foro pennello o jag senza rimozione della guida. Si adatta fino a 30 canne di calibro come il Dewey barrette rivestite. Opere per tutti i calibri. La nostra guida include una porta solvente per facilità d'uso. Basta scivolare la bussola guida sopra la bacchetta di pulizia, poi installare il jag o pennello sull'asta prima di mettere la museruola Buddy sulla canna. Proteggere che correttamente coronato il muso con il gruppo hew muso Buddy. Il Combo di Buddy M1 contiene il Buddy M1 e M1 muso Buddy.
46.9CHF0CHF 46.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Adatto per:
Springfield
Modello:
M1
Peso della spedizione: 0.091kgAltezza di spedizione: 25mmLarghezza di spedizione: 107mmLunghezza di spedizione: 171mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100007592 TK PRODUCTS M1 BUDDY Parti Fabbricante: M1BUDDY Muso di M1 Garand montato pulizia asta guida attrito si adatta sul muso per il corretto allineamento dell'asta di pulizia con il foro. Camera interna permette per l'inversione del foro pennello o jag senza rimozione della guida. Si adatta fino a 30 canne di calibro come il Dewey barrette rivestite. Opere per tutti i calibri. La nostra guida include una porta solvente per facilità d'uso. Basta scivolare la bussola guida sopra la bacchetta di pulizia, poi installare il jag o pennello sull'asta prima di mettere la museruola Buddy sulla canna. Proteggere che correttamente coronato il muso con il gruppo hew muso Buddy. Il Combo di Buddy M1 contiene il Buddy M1 e M1 muso Buddy.
22.9CHF0CHF 22.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 100015393 TK PRODUCTS M1 MUZZLE BUDDY Parti Fabbricante: M1MZBUDDY Muso di M1 Garand montato pulizia asta guida attrito si adatta sul muso per il corretto allineamento dell'asta di pulizia con il foro. Camera interna permette per l'inversione del foro pennello o jag senza rimozione della guida. Si adatta fino a 30 canne di calibro come il Dewey barrette rivestite. Opere per tutti i calibri. La nostra guida include una porta solvente per facilità d'uso. Basta scivolare la bussola guida sopra la bacchetta di pulizia, poi installare il jag o pennello sull'asta prima di mettere la museruola Buddy sulla canna. Proteggere che correttamente coronato il muso con il gruppo hew muso Buddy. Il Combo di Buddy M1 contiene il Buddy M1 e M1 muso Buddy.
27.9CHF0CHF 27.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Altro...
Muso di M1 Garand montato pulizia asta guida attrito si adatta sul muso per il corretto allineamento dell'asta di pulizia con il foro. Camera interna permette per l'inversione del foro pennello o jag senza rimozione della guida. Si adatta fino a 30 canne di calibro come il Dewey barrette rivestite. Opere per tutti i calibri. La nostra guida include una porta solvente per facilità d'uso. Basta scivolare la bussola guida sopra la bacchetta di pulizia, poi installare il jag o pennello sull'asta prima di mettere la museruola Buddy sulla canna. Proteggere che correttamente coronato il muso con il gruppo hew muso Buddy. Il Combo di Buddy M1 contiene il Buddy M1 e M1 muso Buddy.
Altro...
Punteggi dei clienti per TK PRODUCTS M1 BUDDY COMBO
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3.4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....