Il Carrello è vuoto.

Carrello

0917309915

SADLAK INDUSTRIES
M14/M1A TACTICAL MAGAZINE RELEASE

100004037

Oversize Pad For Fast Magazine Changes

Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.

SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.

Altro...

Pad oversize per cambiamenti veloci rivista

Rivista extra-larga, facile da raggiungere rilascio leva sostituisce la parte originale di fabbrica per mag veloce, positivi cambiamenti durante il combattimento o concorso. Pad oversize con verticale, superficie seghettata fornisce il perfetto allineamento con il dito per un rilascio positivo, antiscivolo in tutte le condizioni atmosferiche. Lavorati in acciaio temprato caso per durevolezza aggiunta, poi Parkerized per superior indossare protezione resistenza e corrosione.

Specifiche: in acciaio, finitura Parkerized. Induriti per Rc 55. 1-13 ⁄ 16 cm (2.6) OAL. Pad - 13 ⁄ 16"(4.6 cm) lungo x 13 ⁄ 16" (4.6 cm) largamente. 7 once (19.8 g) peso. Raccordo minore richiesto, comprende i perni di fissaggio.

Altro...

Punteggi dei clienti per SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.8

A must have! (16.01.2010)

Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.

great product (19.05.2010)

very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast

good add on part (21.08.2010)

This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.

For USGI spec rifles.Will not fit metric (11.07.2012)

This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.

Great fit on Springfield bush rifle (27.08.2012)

A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.

worth buying (12.09.2012)

great for quick easy mag changes, install 15-20 mins.

GREAT ADDITION TO MY RIFLE (27.11.2012)

I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.

Mag changes made easy (20.03.2015)

Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.

<img width="500" src='/userdocs/reviewimages/7dfaca20-1efc-4518-8d4e-8bae12ef084d.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/7069a078-c683-4bd2-bc10-54e88669126d.jpg' alt=''>

Well worth it (24.03.2015)

Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.

Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.

Good part. Worth it (03.03.2016)

Great addition. Easier to find in a rush, or when wearing gloves.

Leggi più recensioni su brownells.com

64.9 64.9 1 CHF

N. prodotto: 100004037
SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Parti Fabbricante: 140040 Rivista extra-larga, facile da raggiungere rilascio leva sostituisce la parte originale di fabbrica per mag veloce, positivi cambiamenti durante il combattimento o concorso. Pad oversize con verticale, superficie seghettata fornisce il perfetto allineamento con il dito per un rilascio positivo, antiscivolo in tutte le condizioni atmosferiche. Lavorati in acciaio temprato caso per durevolezza aggiunta, poi Parkerized per superior indossare protezione resistenza e corrosione.

64.9 CHF 3 CHF 64.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Springfield Modello: M14, M1A

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Springfield Modello: M14,M1A Peso della spedizione: 0.023kg Altezza di spedizione: 10mm Larghezza di spedizione: 66mm Lunghezza di spedizione: 130mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Oversize Pad For Fast Magazine Changes

Altro...

Pad oversize per cambiamenti veloci rivista

Altro...

Punteggi dei clienti per SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 4.8

A must have! (16.01.2010)

Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.

great product (19.05.2010)

very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast

good add on part (21.08.2010)

For USGI spec rifles.Will not fit metric (11.07.2012)

Great fit on Springfield bush rifle (27.08.2012)

A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.

worth buying (12.09.2012)

great for quick easy mag changes, install 15-20 mins.

GREAT ADDITION TO MY RIFLE (27.11.2012)

I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.

Mag changes made easy (20.03.2015)

Well worth it (24.03.2015)

Good part. Worth it (03.03.2016)

Great addition. Easier to find in a rush, or when wearing gloves.

Leggi più recensioni su brownells.com

Scelti da altri clientie

SMITH ENTERPRISE M14 EXTENDED BOLT STOP
M14/M1A EXTENDED BOLT STOP

SMITH ENTERPRISE

In magazzino

CHF 104.90 *

Fermo otturatore

4.7

BROWNELLS PRO-SPRING KIT #M14-945 FOR SPRINGFIELD M14, M1A
M14/M1A SPRING KIT

BROWNELLS

In magazzino

CHF 39.90 *

Molle

HOGUE HEX GRIP SCREWS, BLUE, FITS SIG P226,P228,P229
SEMI AUTO GRIP SCREWS

HOGUE

Riordinato

CHF 28.90 * CHF 19.90 - CHF 29.90*

Viti per guancette

SADLAK INDUSTRIES PISTON DRILL SET
M14/M1A GAS SYSTEM CLEANING DRILLS

SADLAK INDUSTRIES

Riordinato

CHF 59.90 * CHF 33.90 - CHF 59.90*

Utensili per gas system

RAM SUPERIOR FIREARM SOLUTIONS SPEED CATCH MAGAZINE RELEASE
AK-47 SPEED CATCH MAGAZINE RELEASE

RAM SUPERIOR FIREARM SOLUTIONS

Non disponibile

Sgancio caricatore

4.3

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.