Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

BROWNELLS
MAGAZINE TOOL for GLOCK®

050806109483 080000191

Removes Base Pads Fast, Without Damage

Specialized pliers allow Glock owners to remove the base pad from factory magazines without gouging or cracking the plastic. Small crimping tips contact the magazine precisely above the locking tabs. Hardened, steel handles feature the correct geometric curvature to prevent over-compression of the magazine sidewalls. Once compressed, simply slide off the base pad. Rubber sleeves provide a positive grip. Wear eye protection when removing magazine base pads.

SPECS: Steel, black finish. 6" (15.2cm) long.

Plus...

Supprime de Base Pads rapide et sans dégâts

Pinces spécialisées permettent aux propriétaires de Glock retirer le coussin de base dans des magazines de l'usine sans abusifs ou fendre le plastique. Petits conseils de sertissage contacter le magazine précisément au-dessus les languettes de verrouillage. En acier trempées, poignées en vedette la courbure géométrique correcte pour éviter une compression excessive des flancs magazines. Une fois comprimé, simplement glisser le socle. Manchons en caoutchouc offrent une adhérence positive. Porter une protection oculaire lors du retrait des tampons de base magazines.

« GLOCK » est une marque déposée par le gouvernement fédéral de Glock, Inc. et est l'une des nombreuses marques de Glock, Inc. ou Glock Ges.m.b.H. Brownells est un revendeur indépendant de pièces et accessoires pour les pistolets Glock ® et n'est pas affilié à ou approuvés par Glock, Inc. ou Glock Ges.m.b.H. l'utilisation de Glock sur cette page ne sert qu'à annoncer la vente de pièces de Glock ou composants. comme il est indiqué dans les descriptions de produit , pas toutes les pièces et accessoires sur ce site sont des produits officiels de Glock.

Spécifications : acier, finition noir. 6 po (15,2 cm) long.

Plus...

Évaluations client de BROWNELLS MAGAZINE TOOL FOR GLOCK

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2.5

Don't buy it (20.10.2009)

This thing is junk. Perhaps I am using it incorrectly, but I doubt it. I've experimented with it many times but I still haven't been able to find a way to get it to help with removing the magazine floor plate. To top it off, the plastic on the handles is always slipping off and needs to be adjusted. Save your money. Don't buy this.

Good enough for me (03.12.2009)

I have used this product on over 30 different Glock magazines. Using it for maintenance purposes or just changing out base plates. Rubber handle slips off, but glue fixes that.
The trick to using these is to grab the mag with this tool, then with a punch, push down on internals of mag, then compress with tool.
Regular pliers will work for doing this, but will scratch the magazines up.

Don't waste your money (15.07.2010)

Don't waste your money on this. Nice concept, but using the Glock tool (or similar) and pinching in on the mag body with your fingers is much, much easier than fumbling with this tool.

It is, what it is......A Tool, (07.08.2010)

When I attended the Glock Armorer's Course, I was taught to take a pin punch and quickly and sharply push the magazine insert down into the mag and it will stay down. (right hand dexterity)
Hold the mag (inverted)in your left hand with your thumb on the rear of the mag base pad. With the mag tool in r-hand tool tips on the mag tabs, compress only enough and push with left thumb on pad. Continue to slowly increase pressure with tool and continue to push with thumb until base pad slides forward. I disassemble them that way, and I have NO COMPLAINT, NO DAMAGE. The tool works well. As far as the handles plastic sleeves,as someone else said,glue them.

Waste of money! (24.03.2011)

This tool mars mag sides by not being padded in the jaws. Better results can be realized by using the glock tool on the floorplate button and tapping the rear ofthe floorplate with a rubber mallet!!!

Worth the $$$ (09.12.2012)

Makes a "3 handed" job quick and easy. Base plates just slide right off. No marking to mag body if you watch what you are doing. Don't know why I did not get one sooner.. Yes, the rubber grips need a shot of glue to stay in place. Was a 2 sec fix. For the low price, it's worth it to have one, even if you only use it a few times a year to clean your mags..

No use (13.12.2012)

Did not work well. Waste.

Laughably useless. (19.07.2014)

Totally ineffective for a human with two hands. Instead, buy the GTUL. Used in a vise, the GTUL is MARGINALLY useful. This tool is nicely made, I might find another use for it, but as a Glock magazine tool it is of no value.

Works as intended (27.08.2014)

I don't understand how anyone would have a problem using this tool.

Firmly punch the insert down, it will roll over the spring into the front of the mag. Squeeze the sides of the mag under the locking tabs with the tool, slide the base plate off. Couldn't be easier.

For the price I expected a higher quality tool, so it loses a star.

Worth it's weight in scrap metal (26.12.2015)

Totally useless. Worth about half its weight in scrap metal. I can't believe Brownells even sells such a useless piece of junk. Save your money and buy a cheap gooseneck plier.

nice concept but bad tool (23.02.2016)

Good concept but really very very cheaply made. Sending back for credit.

Not recommended.

Yes, Right Tool for the Job (16.05.2016)

Hi, I had problems with Glock magazine take down. This was do to old age, arthritis, etc. This tool worked as advertised. Just line up the "nubs" on the magazine body and gently squeeze,works like a charm. Also works on the new Glock 43 magazines.

with some know how works great (25.08.2016)

If you know how to use it, it works great. If you squeeze the mag in just the right place with a punch in the base plat it works. I would recomend puting a a bit of supper glue on the grips to get them to stay on.

Glock Magazine Tool (04.09.2016)

I put off getting this tool for a long time because of the price but broke down and got one. They work and are easy to use. The Glock owner's guide says you can pinch the magazines but I couldn't without this tool. At last I can clean these 25 year old mags.

Waste of money (28.02.2017)

Cheap junk, stay away from.

Overpriced (06.10.2018)

It will make removing the base plate off of a Glock magazine easier, but for the price I would expect a higher quality product. I feel this should be at a $10.00 - $12.00 price point.

Lire 16 plus d'avis sur brownells.com

36.9 36.9 1 CHF

Référence: 080000191
BROWNELLS MAGAZINE TOOL FOR GLOCK 050806109483 Pinces spécialisées permettent aux propriétaires de Glock retirer le coussin de base dans des magazines de l'usine sans abusifs ou fendre le plastique. Petits conseils de sertissage contacter le magazine précisément au-dessus les languettes de verrouillage. En acier trempées, poignées en vedette la courbure géométrique correcte pour éviter une compression excessive des flancs magazines. Une fois comprimé, simplement glisser le socle. Manchons en caoutchouc offrent une adhérence positive. Porter une protection oculaire lors du retrait des tampons de base magazines.

36.9 CHF 28 CHF 36.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: Glock Modèle: Universal Handguns

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Manufacture: Glock Modèle: Universal Handguns Poids du colis: 0.068kg Hauteur d'expédition: 10mm Largeur d'expédition: 81mm Longueur d'expédition: 246mm

Détails de l'article

Fabriqué au USA

Removes Base Pads Fast, Without Damage

SPECS: Steel, black finish. 6" (15.2cm) long.

Plus...

Supprime de Base Pads rapide et sans dégâts

Spécifications : acier, finition noir. 6 po (15,2 cm) long.

Plus...

Évaluations client de BROWNELLS MAGAZINE TOOL FOR GLOCK

Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2.5

Don't buy it (20.10.2009)

Good enough for me (03.12.2009)

Don't waste your money (15.07.2010)

Don't waste your money on this. Nice concept, but using the Glock tool (or similar) and pinching in on the mag body with your fingers is much, much easier than fumbling with this tool.

It is, what it is......A Tool, (07.08.2010)

Waste of money! (24.03.2011)

This tool mars mag sides by not being padded in the jaws. Better results can be realized by using the glock tool on the floorplate button and tapping the rear ofthe floorplate with a rubber mallet!!!

Worth the $$$ (09.12.2012)

No use (13.12.2012)

Did not work well. Waste.

Laughably useless. (19.07.2014)

Works as intended (27.08.2014)

Worth it's weight in scrap metal (26.12.2015)

Totally useless. Worth about half its weight in scrap metal. I can't believe Brownells even sells such a useless piece of junk. Save your money and buy a cheap gooseneck plier.

nice concept but bad tool (23.02.2016)

Good concept but really very very cheaply made. Sending back for credit.

Not recommended.

Yes, Right Tool for the Job (16.05.2016)

with some know how works great (25.08.2016)

Glock Magazine Tool (04.09.2016)

Waste of money (28.02.2017)

Cheap junk, stay away from.

Overpriced (06.10.2018)

It will make removing the base plate off of a Glock magazine easier, but for the price I would expect a higher quality product. I feel this should be at a $10.00 - $12.00 price point.

Lire 16 plus d'avis sur brownells.com

Poursuivre vos achats

A-ZOOM 7MM-08 REMINGTON SNAP CAPS 2/PACK
AMMO SNAP CAP DUMMY ROUNDS

A-ZOOM

Récommandé

CHF 19.90 * CHF 14.90 - CHF 45.90*

Cartouches Factices

4.2

CCRS INDUSTRY MAGGCLAW BASE PLATE REMOVAL TOOL FOR GLOCK
MAGGCLAW BASE PLATE REMOVAL TOOL FOR GLOCK®

CCRS INDUSTRY

Non disponible

Plaques de Fond Chargeur

TANGODOWN FLOORPLATE REMOVAL TOOL FOR GLOCK®
FLOORPLATE REMOVAL TOOL FOR GLOCK®

TANGODOWN

En stock

CHF 22.90 *

Outils Chargeur

BROWNELLS STAINLESS STEEL ROLL PIN KIT
STAINLESS STEEL ROLL PIN KIT

BROWNELLS

Récommandé

CHF 124.90 * CHF 12.90 - CHF 124.90*

Goupilles

MAGPUL .223/5.56 DUMMIES, 5-PAK
.223/5.56 DUMMY ROUNDS

MAGPUL

En stock

CHF 15.90 *

Cartouches Factices

3.4

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.