MAGPUL MOE QUICK DETACH BIPOD FOR M-LOK Magpul offered a variety of bipods for quite some time, but none have attached as simply and quickly as the MOE QD Bipod for M-LOK. This new bipod provides shooters a quick-attach and detach function when using guns with an M-LOK hand guard or forend; by speeding up the attachment process via the integral attachment knob, you can get support when firing faster than ever before. To attach the bipod, simply insert the M-LOK stud into the M-LOK slot, rotate the bipod 45° counterclockwise so the stud is perpendicular to the M-LOK slot, and tighten the adjustment knob to securely fasten against the forend. No tools required. Aside from the quick, simple attachment method, the bipod is almost 40% lighter than some of thier existing bipods. The injection-molded construction won’t deform or break under pressure, and it provides a consistent, stable platform from which to shoot. The bipod plate – made from the same injection-molded material as the bipod itself – provides a solid mounting surface and features two (2) additional M-LOK lugs to promote proper alignment after installation, as well as increased stability and durability during recoil. The bipod is also equipped with a low-profile sling stud on the rear to allow sling attachment for easy carry and transportation of the firearm. The MOE QD bipod has a low stack height of 1.7” when folded, giving it a streamlined profile when the legs are stowed. When the legs are needed, they deploy and stow with the push of a button, snapping and locking into position. The legs extend from 7" to 10" and are adjusted easily and independently via a button located at the top of each leg. Within this adjustment range, there are seven (7) ½" spaced locking detents to fine tune the bipod’s deployed height. Additionally, the bipod’s soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch should shooters want to change them to something different (the bipod accepts most Atlas-pattern bipod feet). FEATURES: QUICK, SIMPLE INSTALLATION: The MOE QD Bipod installs via an adjustment knob Minimizes installation requirements since no other hardware is required COMPACT, LIGHTWEIGHT: 40% lighter than some other Magpul bipods Stack height of 1.7”; when extended legs measure 7”-10” in 0.5” increments VERSATILE LEGS AND FEET: Soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch Legs accept most Atlas-pattern bipod replaceable feet to best match the needs of your environment SPECIFICATIONS: Attachment: M-LOK Slots Materials: Polymer, steel Height, max: 10 in. Pan and Tilt: No Weight: 9 oz. Made in the USA.
La solution idéale pour une installation rapide et efficace !
Découvre le MOE QUICK DETACH BIPOD FOR M-LOK de MAGPUL, un bipied qui se fixe facilement et rapidement à ton arme équipée d'un garde-main ou d'un avant M-LOK.
Description du produit
Magpul propose une variété de bipieds depuis un certain temps, mais aucun ne s'attache aussi simplement et rapidement que le MOE QD Bipod pour M-LOK. Ce nouveau bipied offre aux tireurs une fonction de fixation et de détachement rapide. Grâce à son bouton de fixation intégré, tu peux obtenir un soutien pour tirer plus vite que jamais.
Pour attacher le bipied, il te suffit d'insérer le stud M-LOK dans la fente M-LOK, de faire pivoter le bipied de 45° dans le sens inverse des aiguilles d'une montre pour que le stud soit perpendiculaire à la fente M-LOK, puis de serrer le bouton de réglage pour le fixer solidement contre l'avant. Aucun outil n'est requis.
En plus de sa méthode de fixation rapide et simple, le bipied est presque 40 % plus léger que certains de leurs bipieds existants. Sa construction en plastique injecté ne se déforme pas et ne se casse pas sous pression, offrant une plateforme stable et cohérente pour tirer.
Caractéristiques
- INSTALLATION RAPIDE ET SIMPLE : Le MOE QD Bipod s'installe via un bouton de réglage, minimisant les exigences d'installation.
- COMPACT ET LÉGER : 40 % plus léger que d'autres bipieds Magpul, avec une hauteur de pile de 1,7". Les jambes mesurent de 7" à 10" en incréments de 0,5".
- JAMBES ET PIEDS POLYVALENTS : Les pieds en caoutchouc doux et antidérapants adhèrent à une large gamme de surfaces de tir et sont facilement amovibles avec un poinçon à goupille.
Spécifications
- Attachement : Fentes M-LOK
- Matériaux : Polymère, acier
- Hauteur max : 10 in.
- Panning et inclinaison : Non
- Poids : 9 oz.
- Fabriqué aux États-Unis.
Le MOE QD bipod a une faible hauteur de pile de 1,7" lorsqu'il est replié, offrant un profil épuré lorsque les jambes sont rangées. Lorsque tu as besoin des jambes, elles se déploient et se rangent d'une simple pression sur un bouton, se verrouillant en position. Les jambes s'étendent de 7" à 10" et s'ajustent facilement et indépendamment grâce à un bouton situé en haut de chaque jambe. Dans cette plage d'ajustement, il y a sept (7) détentes de verrouillage espacées de ½" pour affiner la hauteur déployée du bipied.
De plus, les pieds en caoutchouc doux et en plusieurs étapes offrent une excellente adhérence sur une large gamme de surfaces de tir. Les pieds sont également facilement amovibles si tu souhaites les remplacer par un autre modèle (le bipied accepte la plupart des pieds de bipied au format Atlas).