MAGPUL MOE QUICK DETACH BIPOD FOR M-LOK Magpul offered a variety of bipods for quite some time, but none have attached as simply and quickly as the MOE QD Bipod for M-LOK. This new bipod provides shooters a quick-attach and detach function when using guns with an M-LOK hand guard or forend; by speeding up the attachment process via the integral attachment knob, you can get support when firing faster than ever before. To attach the bipod, simply insert the M-LOK stud into the M-LOK slot, rotate the bipod 45° counterclockwise so the stud is perpendicular to the M-LOK slot, and tighten the adjustment knob to securely fasten against the forend. No tools required. Aside from the quick, simple attachment method, the bipod is almost 40% lighter than some of thier existing bipods. The injection-molded construction won’t deform or break under pressure, and it provides a consistent, stable platform from which to shoot. The bipod plate – made from the same injection-molded material as the bipod itself – provides a solid mounting surface and features two (2) additional M-LOK lugs to promote proper alignment after installation, as well as increased stability and durability during recoil. The bipod is also equipped with a low-profile sling stud on the rear to allow sling attachment for easy carry and transportation of the firearm. The MOE QD bipod has a low stack height of 1.7” when folded, giving it a streamlined profile when the legs are stowed. When the legs are needed, they deploy and stow with the push of a button, snapping and locking into position. The legs extend from 7" to 10" and are adjusted easily and independently via a button located at the top of each leg. Within this adjustment range, there are seven (7) ½" spaced locking detents to fine tune the bipod’s deployed height. Additionally, the bipod’s soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch should shooters want to change them to something different (the bipod accepts most Atlas-pattern bipod feet). FEATURES: QUICK, SIMPLE INSTALLATION: The MOE QD Bipod installs via an adjustment knob Minimizes installation requirements since no other hardware is required COMPACT, LIGHTWEIGHT: 40% lighter than some other Magpul bipods Stack height of 1.7”; when extended legs measure 7”-10” in 0.5” increments VERSATILE LEGS AND FEET: Soft, stepped, non-slip rubber feet grip a wide array of shooting surfaces; the feet are also easily removed with a roll-pin punch Legs accept most Atlas-pattern bipod replaceable feet to best match the needs of your environment SPECIFICATIONS: Attachment: M-LOK Slots Materials: Polymer, steel Height, max: 10 in. Pan and Tilt: No Weight: 9 oz. Made in the USA.
Entdecke die MOE QUICK DETACH BIPOD für M-LOK von MAGPUL!
Die MAGPUL MOE QUICK DETACH BIPOD für M-LOK ist eine revolutionäre Lösung für Schützen, die eine schnelle und einfache Anbringung ihrer Bipod benötigen. Mit dieser neuen Bipod kannst du deine Waffe schnell und unkompliziert an einem M-LOK Handguard oder Forend befestigen. Der integrierte Anbringungsknopf beschleunigt den Prozess, sodass du schneller Unterstützung beim Schiessen bekommst.
Einfacher Anbau
Um die Bipod anzubringen, musst du einfach den M-LOK-Stift in den M-LOK-Slot einsetzen, die Bipod um 45° gegen den Uhrzeigersinn drehen, sodass der Stift senkrecht zum M-LOK-Slot steht, und dann den Einstellknopf festziehen. Kein Werkzeug erforderlich!
Leicht und stabil
Die Bipod ist fast 40% leichter als einige der bestehenden Modelle und bietet dank der spritzgegossenen Konstruktion eine stabile Plattform, die unter Druck nicht verformt oder bricht. Die Bipod-Platte, aus demselben Material gefertigt, bietet eine solide Montagefläche und verfügt über zwei zusätzliche M-LOK-Lugs für eine korrekte Ausrichtung nach der Installation sowie für mehr Stabilität und Haltbarkeit beim Rückstoss.
Praktische Funktionen
- Niedriges Gewicht: 40% leichter als andere Magpul Bipods.
- Stapelhöhe: 1,7” im gefalteten Zustand; ausgefahren von 7” bis 10” in 0,5” Schritten.
- Vielseitige Beine und Füsse: Die weichen, gestuften, rutschfesten Gummifüsse bieten Halt auf verschiedenen Schiessoberflächen und lassen sich leicht mit einem Rollstift herausnehmen.
- Beine: Akzeptieren die meisten austauschbaren Füsse im Atlas-Muster, um deinen Bedürfnissen gerecht zu werden.
Technische Spezifikationen
- Anbringung: M-LOK Slots
- Materialien: Polymer, Stahl
- Maximale Höhe: 10 Zoll
- Pan und Tilt: Nein
- Gewicht: 9 oz
- Hergestellt in: USA
Die MOE QD Bipod hat eine niedrige Stapelhöhe von 1,7” im gefalteten Zustand und bietet ein schlankes Profil, wenn die Beine verstaut sind. Wenn du die Beine benötigst, lassen sie sich mit einem Knopfdruck ausfahren und verriegeln. Ausserdem verfügen die Beine über sieben ½" Abstandssperren, um die Höhe der Bipod genau einzustellen.
Entdecke die Vorteile der MOE QUICK DETACH BIPOD für M-LOK und verbessere dein Schiesserlebnis!