Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

WILLIAMS GUN SIGHT
MARLIN DOVETAIL FIRE SIGHT SET

053506602179 962602170

Upgrade Your Factory Sights With Easy-To-See, Fiber Optics

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod.

SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not fit Win. 94/22. Requires two holes in the left side of the receiver and will require drilling and tapping on the newer guns. FP-94SE fits Win. 94 angle eject with front ramp, except Big Bore models. FP-336 fits Marlin 36, 336, 1894, 1895 and 444. Attaches to the top of the receiver and bolts up to factory drilled and tapped holes. FP-450 fits Marlin 450. WGRS-336 fits Marlin 336, 444, 44 and 1895. 5D-94 fits Winchester 94 top eject rifles. 5D-336 fits Marlin 336 rifles, mounts using scope mount holes.

Altro...

Aggiornare le vostre viste di fabbrica con facile--vedere, fibra ottica

Tutti gli insiemi dispongono di un rosso brillante, fibra ottica, mirino e completamente regolabile peep o U-tacca, tacca di mira. U-tacca, tacca di mira set utilizzano il modello altamente accurato, 3-dot con due puntini ottica di fibra verde, nella parte posteriore per contrasto nitido e acquisizione rapida vista in tutte le condizioni di luce. Nessuna foratura o maschiatura necessaria per la maggior parte dei modelli di fucile. Coda di rondine anteriore e tacca di mira può richiedere raccordo minore. Per Marlin e Winchester Fucili a leva. A coda di rondine sostituisce fabbrica anteriore e tacca di mira. Tacca di mira è vite regolabile per elevazione e deriva regolabile in deriva; ha due, i punti verdi, fibra ottica. Anteriore è rosso, asta in fibra ottica.

Specifiche: alluminio, anodizzato nero. A coda di rondine si adatta a tutte le azioni di leva Winchester e Marlin con rampa mirini. FP-94/36 si inserisce Win. top 94 espellere e modelli 55, 63, 64 e 65; Marlin 36, 336, 1894, 1895 e 444. Win non è adatta. 94/22. Richiede due fori sul lato sinistro del ricevitore e sarà richiedono foratura e maschiatura sulle armi più recenti. FP-94SE adatto a Win. angolo di 94 espellere con rampa anteriore, tranne i modelli Big Bore. FP-336 si inserisce Marlin 36, 336, 1894, 1895 e 444. Si attacca alla parte superiore del ricevitore e bulloni fino a fabbrica forati e fori filettati. FP-450 si inserisce Marlin 450. WGRS-336 si inserisce Marlin 336, 444, 44 e 1895. 5D-94 si adatta Winchester 94 top espellere fucili. 5D-336 adatta fucili Marlin 336, supporti utilizzando l'ambito montare fori.

Altro...

Punteggi dei clienti per WILLIAMS GUN SIGHT MARLIN FIBER OPTIC DOVETAIL FIRE SIGHT SET MULTI

Numero di punteggi: 13
Da brownells.com: 13
Punteggio medio: 2.7

Winchester Model 94 XTR Chambered in 375 (27.01.2010)

I installed the dovetail sight set and was thrilled with the sight picture; the fiber optics really make sight acquisition easy. However, no joy when I took the rifle to the range. I couldn't hit the target at 25 steps...too high. After adjusting the rear sight as low as it would go (i.e. removed the set screw), I just did hit the top of the box to which I had placed a shoot-n-see target. I guess the only option is to raise the front sight, and this will be nothing but a snag in the gun case.

Easy,bright sight (12.06.2010)

Put these sights on a MArlin 1895 Cuide Gun with the ported barrel. Very easy to install and the sight picture is much better than the stock sight. I shoot hot hand loads and sighting in at 100 yards I had to crank the rear sight almost to the very top of the adjustment screw. I will be buying another set for a different 45-70 rifle I have.

Excellent inexpensive sight. (06.12.2010)

I put a set of these on my 1895 45-70 and 1894 44 mag Marlins. The 1895 install corrected a problem the factory sights had, shooting 5" low. The sight set comes with an M type front insert, but the 1894 requires an N width of the same height #34. It is very common to have to juggle front sight insert height on different lever guns chambered for different cartridges, 0.009" per inch of shift at 50 yards.

Sight picture is excellent, sights are highly visible and it is nice to have simple windage adjustment.

Not enough adjustment available (09.04.2011)

Tried it on a Marlin 336 and a Winchester model 94. Sight picture and visibility is great! Unfortunately, there's not enough adjustment to get either one of these rifles to hit paper. The front and rear sight heights are made way too far off from each other to get the elevation adjusted correctly. I had to go back to the original sights.

Good Speed Sights (21.06.2012)

Installed on Marlin 1894. As mentioned in GunTech article, also order the the .312 N front blade which fits Marlin better. With rear all the way down and using .312 front, able to tear up the target center at 25 yds. at speed.

Big improvement over factory sights. (09.08.2012)

Needed minor fitting (filing) of the front sight. Rear sight was an easy swap. Took about 30 minutes to install both. Makes for a quick sight picture. Easy to adjust- will need a very small screwdriver to do so. Makes my Marlin 1895G much easier for me to shoot accurately.

Didn't Work (24.09.2012)

Great low light visibility. Installed a set on my Winchester 94 in 356. Shoots 16" high @ 100 meters with rear sight all the way down. Judging by other's comments this is a common scenario. Wish Williams wouldn't have advertised it for this gun. I would have saved myself a lot of time.

not for a marlin 336 (13.06.2013)

Rear sight was easy to install, Front sight took some machining to clear the barrel band. With the rear sight at the lowest setting the gun was 2 feet high at 25 yards. Wasted time and money. Expected more from a williams product.

great sights (29.06.2013)

Well I don't know about other lever guns but they fit my Marlin 1895 guide gun with no issues. I just filed the front sight until it fit like the old one and now it looks like it came that way. Took it out to the range and it sighted in nice and easy.

good for the money (27.12.2013)

good for low light hunting

good sights for Win 94/22M (15.08.2014)

Installed on a 30 yr old Winchester 94/22 in 22M. First shot on the bull at 15yds. A little low at 100. sight picture is incredible good product.

Not for a Marlin 336 (22.02.2016)

I agree with the pervious comment by Earl. I installed these sights om a Marlin 336. Installation was fairly straightforward.

But the rifle shoots 16 inches high at 50 yards. This may fit a variety of rifles, but it just does not work on a 336. Wasted money

gun shoots over 12 high at 100 yds now (09.04.2017)

front sight to low for Winchester 94

Leggi più recensioni su brownells.com

54.9 54.9 1 CHF

N. prodotto: 962602170
WILLIAMS GUN SIGHT MARLIN FIBER OPTIC DOVETAIL FIRE SIGHT SET MULTI
Parti Fabbricante: 60217 053506602179 Tutti gli insiemi dispongono di un rosso brillante, fibra ottica, mirino e completamente regolabile peep o U-tacca, tacca di mira. U-tacca, tacca di mira set utilizzano il modello altamente accurato, 3-dot con due puntini ottica di fibra verde, nella parte posteriore per contrasto nitido e acquisizione rapida vista in tutte le condizioni di luce. Nessuna foratura o maschiatura necessaria per la maggior parte dei modelli di fucile. Coda di rondine anteriore e tacca di mira può richiedere raccordo minore. Per Marlin e Winchester Fucili a leva. A coda di rondine sostituisce fabbrica anteriore e tacca di mira. Tacca di mira è vite regolabile per elevazione e deriva regolabile in deriva; ha due, i punti verdi, fibra ottica. Anteriore è rosso, asta in fibra ottica.

54.9 CHF 4 CHF 54.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Marlin, Winchester Colore: Multi Colore delle mire: Red/Green Modello: Universal Rifles Tipo: Fibra ottica

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Marlin,Winchester Colore: Multi Colore delle mire: Red/Green Modello: Universal Rifles Tipo: Fibra ottica Peso della spedizione: 0.032kg Altezza di spedizione: 8mm Larghezza di spedizione: 99mm Lunghezza di spedizione: 152mm

Dettagli dell'elemento

Made in Usa

Upgrade Your Factory Sights With Easy-To-See, Fiber Optics

Altro...

Aggiornare le vostre viste di fabbrica con facile--vedere, fibra ottica

Altro...

Punteggi dei clienti per WILLIAMS GUN SIGHT MARLIN FIBER OPTIC DOVETAIL FIRE SIGHT SET MULTI

Numero di punteggi: 13
Da brownells.com: 13
Punteggio medio: 2.7

Winchester Model 94 XTR Chambered in 375 (27.01.2010)

Easy,bright sight (12.06.2010)

Excellent inexpensive sight. (06.12.2010)

Not enough adjustment available (09.04.2011)

Good Speed Sights (21.06.2012)

Big improvement over factory sights. (09.08.2012)

Didn't Work (24.09.2012)

not for a marlin 336 (13.06.2013)

great sights (29.06.2013)

good for the money (27.12.2013)

good for low light hunting

good sights for Win 94/22M (15.08.2014)

Installed on a 30 yr old Winchester 94/22 in 22M. First shot on the bull at 15yds. A little low at 100. sight picture is incredible good product.

Not for a Marlin 336 (22.02.2016)

gun shoots over 12 high at 100 yds now (09.04.2017)

front sight to low for Winchester 94

Leggi più recensioni su brownells.com

Scelti da altri clientie
In alternativa

L.E. WILSON PISTOL MAX GAGE 9MM LUGER
WILSON PISTOL MAX CASE GAGES

L.E. WILSON

In magazzino

CHF 39.90 *

Case Gauges & Headspace Tools

New

MIDWEST INDUSTRIES HANDGUARD ALUMINUM 13.625" BLACK M-LOK
MARLIN 1895 HANDGUARD M-LOK

MIDWEST INDUSTRIES

In magazzino

CHF 269.90 *

ISMI 18 LB. S/S RECOIL SPRING
1911 GOVERNMENT RECOIL SPRINGS

ISMI

In magazzino

CHF 15.90 *

Molla di recupero

3.5

MAGPUL M-LOK RAIL 3 SLOT PICATINNY ALUMINUM BLACK 1.5"
AR-15 PICATINNY M-LOK RAIL ALUMINUM

MAGPUL

In magazzino

CHF 27.90 * CHF 27.90 - CHF 34.90*

TAYLORS AND CO. PIETTA, 1858 REM CONVERSION CYLINDER 44 TO 45LC
REVOLVER CARTRIDGE CONVERSION CYLINDER

TAYLORS AND CO.

In magazzino

CHF 489.90 * CHF 489.90 - CHF 569.90*

Tamburi

4.1

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.