U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Replaces factory rear sight. Rear sight is screw adjustable for elevation and drift adjustable for windage.
SPECS: Aluminum, black anodized. Fits all Winchester and Marlin lever actions with 2 inches behind rear of dovetail cut.
Altro...
U-tacca, set tacca di mira utilizzare il modello altamente accurato, 3-dot con due punti verdi, in fibra ottica nella parte posteriore per il forte contrasto e acquisizione rapida vista in tutte le condizioni di luce. Coda di rondine anteriore e tacca di mira può richiedere il montaggio minore. Per leva d'azione fucili Marlin e Winchester. Sostituisce la vista posteriore di fabbrica. Tacca di mira è regolabile in altezza e deriva regolabile per la derivazione di vite.
Specifiche: alluminio, anodizzato nero. Si adatta a tutti i Winchester e Marlin azioni leva con 2 pollici dietro la parte posteriore del taglio a coda di rondine.
Altro...
Punteggi dei clienti per WILLIAMS GUN SIGHT MARLIN 2-DOT FIBER OPTIC DOVETAIL REAR FIRE SIGHT GREEN
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
Okay(10.10.2012)
Looking through the fiber optic sight is great. Unfortunately, the sight itself is just average.
The windage adjustment is held by a screw (between fiber optic piece). Loosen the screw and the fiber optic slides from side to side on the arm of the dove tail base. There are no marks to see how far you've adjusted the sight.
The elevation adjustment is a screw (in front of fiber optice piece) that that goes through the arm of the dove tail base and contacts the barrel. Without lock tite it will not hold adjustment. Again, there are no marks to reference adjustments.
The screw that goes through the dove tail base simply locks the dove tail.
If this sight was easier to adjust, I'd have given it five stars.
Fair, not good, not great(21.07.2014)
Fits on my Marlin 1895G and my Win 94, but exactly as Cambridge22 states, the adjustment controls are lacking at best. I replaced the factory buckhorn and found the front sight was now too low, and the range of adjustment with that tiny elevation screw wasn't sufficient. I went through 3 other purchased front sights to get within that slim range of adjustment from this unit. It's ok for hunting if you are using the same bullets year after year, shooting the same distances, and don't need to make adjustments to your sight (likely the same hunting conditions/parameters you'd expect with the factory sights.
N. prodotto: 962000098 WILLIAMS GUN SIGHT MARLIN 2-DOT FIBER OPTIC DOVETAIL REAR FIRE SIGHT GREEN Parti Fabbricante: 62261053506622610 U-tacca, set tacca di mira utilizzare il modello altamente accurato, 3-dot con due punti verdi, in fibra ottica nella parte posteriore per il forte contrasto e acquisizione rapida vista in tutte le condizioni di luce. Coda di rondine anteriore e tacca di mira può richiedere il montaggio minore. Per leva d'azione fucili Marlin e Winchester. Sostituisce la vista posteriore di fabbrica. Tacca di mira è regolabile in altezza e deriva regolabile per la derivazione di vite.
31.9CHF19CHF 31.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Marlin,Winchester
Colore:
Green
Colore delle mire:
Green
Modello:
Universal Rifles
Tipo:
2-Dot,Fibra ottica
Peso della spedizione: 0.023kgAltezza di spedizione: 30mmLarghezza di spedizione: 94mmLunghezza di spedizione: 152mm
U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Replaces factory rear sight. Rear sight is screw adjustable for elevation and drift adjustable for windage.
SPECS: Aluminum, black anodized. Fits all Winchester and Marlin lever actions with 2 inches behind rear of dovetail cut.
Altro...
U-tacca, set tacca di mira utilizzare il modello altamente accurato, 3-dot con due punti verdi, in fibra ottica nella parte posteriore per il forte contrasto e acquisizione rapida vista in tutte le condizioni di luce. Coda di rondine anteriore e tacca di mira può richiedere il montaggio minore. Per leva d'azione fucili Marlin e Winchester. Sostituisce la vista posteriore di fabbrica. Tacca di mira è regolabile in altezza e deriva regolabile per la derivazione di vite.
Specifiche: alluminio, anodizzato nero. Si adatta a tutti i Winchester e Marlin azioni leva con 2 pollici dietro la parte posteriore del taglio a coda di rondine.
Altro...
Punteggi dei clienti per WILLIAMS GUN SIGHT MARLIN 2-DOT FIBER OPTIC DOVETAIL REAR FIRE SIGHT GREEN
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
Okay(10.10.2012)
Looking through the fiber optic sight is great. Unfortunately, the sight itself is just average.
The windage adjustment is held by a screw (between fiber optic piece). Loosen the screw and the fiber optic slides from side to side on the arm of the dove tail base. There are no marks to see how far you've adjusted the sight.
The elevation adjustment is a screw (in front of fiber optice piece) that that goes through the arm of the dove tail base and contacts the barrel. Without lock tite it will not hold adjustment. Again, there are no marks to reference adjustments.
The screw that goes through the dove tail base simply locks the dove tail.
If this sight was easier to adjust, I'd have given it five stars.
Fair, not good, not great(21.07.2014)
Fits on my Marlin 1895G and my Win 94, but exactly as Cambridge22 states, the adjustment controls are lacking at best. I replaced the factory buckhorn and found the front sight was now too low, and the range of adjustment with that tiny elevation screw wasn't sufficient. I went through 3 other purchased front sights to get within that slim range of adjustment from this unit. It's ok for hunting if you are using the same bullets year after year, shooting the same distances, and don't need to make adjustments to your sight (likely the same hunting conditions/parameters you'd expect with the factory sights.