Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
592046792358 100015709
The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
45.9 45.9 1 CHF
N. prodotto: 100015709
TACTICOOL22 M&P 15-22 BARREL NUT WRENCH
Parti Fabbricante: BNW1PRO 592046792358 Le alette sono progettate per adattarsi agevolmente, con il minimo movimento, per mantenere il dado di ottenere danneggiato. All'interno della chiave si adatta sopra più standard A1 e A2 flash hiders, così come Yankee Hill e altri. L'esterno della chiave si adatta bene all'interno del magazzino paramano. Ci sono che due appartamenti per un 15/16 chiave da chiave a brugola o corvi piede chiave, se si desidera utilizzare una chiave dinamometrica. Questa è la versione Professional/armaiolo della chiave dado canna per la Smith Wesson & M & P 15-22. Otterrete molti anni di uso gratuito di guai da questa chiave dado a barile. Questa chiave si inserisce sopra più standard diametro muso dispositivi quali birdcage A2, ma il dado canna e astina tappo non sarà. Pertanto, è necessario rimuovere il dispositivo della museruola per rimuovere il dado di botte e botte. Semplice, passo-passo le istruzioni sono incluse. Lavorate dal più alta qualità USA alluminio stock disponibili. Progettato, sviluppato e fabbricato negli S.U.A.
45.9 CHF 5 CHF 45.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 0.068kg Altezza di spedizione: 32mm Larghezza di spedizione: 32mm Lunghezza di spedizione: 254mm

Dettagli dell'elemento

Made in Usa



The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
Newsletter